Newmar PT-24-45U Battery Charger Automotive/RV

PT-24-45U Battery Charger

"Smart" marine battery charging technology for 24-volt systems aboard workboats, military vessels, commercial ships and pleasure boats. This charger interacts with batteries, providing an optimal three-stage charging process for rapid recovery and conditioning, maximizing performance and extending battery life.

A selector switch adjusts the voltage of outlet to fit gel cell flooded lead. -Types of acid or AGM batteries. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. All models are housed in a rugged stainless steel housing with a durable white powder coat finish, and internal circuitry is polyurethane coated for maximum corrosion resistance.

Features:

24 volt model
"Smart" circuit allows three-stage charging: bulk, absorption, floating battery
Flooded Gel Cell/Lead Acid Battery/AGM Battery Switch Type Senses Optimal Charging/Float Voltages
Multiple Isolated Output Banks; ammeter indicates total output current
Optional sensor adjusts output voltage based on battery temperature
Current limiting prevents damage due to overload overload
Use as power supply; can power loads without an in-line battery
Built to last: Rugged stainless steel housing with a durable white powder coat finish with an optional anti-drip shield and marinized internal circuitry
Protection: current limiting, thermal protection, forced air cooling, anti-drip protection
Install inconjunction with PT-MCU for additional control and monitoring
ABS type approval for battery charging and power supply

Specifications:

VAC Input (50-60 Hz.): 90 - 264
Input Amps at Full Load Load: At 115 VAC: 12, at 230 VAC: 7
Power factor: 0.98 at 115 V and 0.95 at 230 V
Maximum output amps: 45
Banks of output: 3
Battery capacity (amp-hours): 90 – 450
Temp. of operation. Rating Reference: T-5
Case Size Reference: A-4
Case Size (H x W x D): 14.8B x 9.6 x 5 .6D inches (37.6D x 24.4 x 14.2D centimeters) *Note with Dripshield installed, add 1" (2.54 cm) to height and 0.5" (1.2 cm) to depth
Weight Lbs./Kg: 12/6
Temp. optional. Sensor Model: TCS-12/24
Remote Panel Model: RP
Conf Referenceormitity: EN, CE, ABS

Temperature Rating References:

Temperature: -20 degrees C to +70 degrees C
Linear reduction from 100% at 50 degrees C to 50% at 70 degrees C

Rated output voltage at gel/inode switch settings (without temperature compensation):

Gel-Cell: 28.0 VDC Charge at 50% load and 27.2 VDC floating at 0.5 A load
Flooded/AGM: 28.4 VDC at 50% load and 26.8 VDC floating at 0.5 A load

Compliance References:

UL: UL 1950 (according to DNB report)
CG: USCGCFR 183.410 (Protected against ignition)
EN: EN 60335-1
CE: CE marked
ABS: PT series complies with SVR 2009 4-8- 3/5.9, Under 90 meter rules 2006 4 -6-4/7.19 and HSNC 2007 4-8-3/5.13.

Options:

Remote panel, RP model, for use with all models except PT-24-20U, PT-24-60 and PT-32-25 (LEDs indicate charger output stage. Three-stage manual charging cycle reset. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ L)

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly with any problems or concerns.

PRODUCT ID: 102330
SKU: NVN-102330
CSKU: CWR-102330
REWRITE : 113441 -newmar-pt-24-45u-battery-charger
MPN: PT-24-45U
UPC:
ASIN:
WSKU:
SSKU:
KSKU :
GSKU:
MSKU:
LSKU:
NAME: NEWMAR PT-24-45U BATTERY CHARGER
NAME_EX:
PTITLE: Newmar PT-24-45U Battery Charger
br>TYPE: Automotive/RV | Charger/Inverter Combos
SELLER: Newmar Power
ELECTRONICS> ELECTRONIC ACCESSORIES> POWER

Gtags:

GSpecs:

Newmar PT-24-45U Battery Charger Product Description

PT-24-45U Battery Charger

"Smart" marine battery charging technology for 24 systems volts aboard workboats and military vessels, commercial vessels and pleasure boats. This charger interacts with batteries, providing an optimal three-stage charging process for rapid recovery and conditioning, maximizing performance and extending battery life.

A selector switch adjusts the voltage of outlet to fit gel cell flooded lead. -Types of acid or AGM batteries. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. All models are housed in a rugged stainless steel housing with a durable white powder coat finish, and the internal circuitry is coated in polyurethane.for maximum corrosion resistance.

Features:

24 volt model
The "smart" circuit allows three-stage charging: bulk, absorption, float
Gel cell/flooded lead-acid/AGM battery type switch selects optimal charge/flood voltages
Multiple isolated output banks; ammeter indicates total output current
Optional sensor adjusts output voltage based on battery temperature
Current limiting prevents damage due to overload overload
Use as power supply; can power loads without an in-line battery
Built to last: Rugged stainless steel housing with a durable white powder coat finish with an optional anti-drip shield and marinized internal circuitry
Protection: current limitation, thermal protection, forced air cooling, protectionanti-drip
Install in conjunction with PT-MCU for additional control and monitoring
ABS type approval for battery charging and power supply

Specifications:

VAC Input (50-60 Hz.): 90 - 264
Input Amps at full load Load: at 115 VAC: 12, at 230 VAC: 7
Power factor: 0.98 at 115 V and 0.95 at 230 V
Output amps maximum: 45
OOutput banks: 3
Battery capacity (amp-hours): 90 – 450
Temp. of operation. Rating Reference: T-5
Case Size Reference: A-4
Case Size (H x W x D): 14.8B x 9.6 x 5 .6D inches (37.6D x 24.4 x 14.2D centimeters) *Note with Dripshield installed, add 1" (2.54 cm) to height and 0.5" (1.2 cm) to depth
Weight Lbs./Kg: 12/6
Temp. optional. Sensor Model: TCS-12/24
Dist Panel Modelant: RP
Conformity reference: EN, CE, ABS

Temperature Assessment references:

Temperature: -20 degrees C to +70 degrees C
Linear reduction from 100% at 50 degrees C to 50% at 70 degrees C

Rated output voltage at Gel/Inode switch settings (without temperature compensation):

Gel-Cell: 28.0 VDC Charge at 50% load and 27.0 VDC 2 VDC floating at 0.5 A load
Flooded/AGM: 28.4 VDC at 50% load and 26.8 VDC floating at 0.5 A load

Conformity references:

UL: UL 1950 (according to DNB report)
CG: USCG CFR 183.410 (protected against inflammation)
EN: EN 60335-1
CE: bears the CE marking
ABS: the PT series complies with SVR 2009 standards 4- 8-3/5.9, under 90 meters rules 2006 4-6-4/7.19 and HSNC 2007 4-8-3. /5.13.

Options:

Remote panel, moRP LED, for use with all models except PT-24-20U, PT-24-60 and PT-32-25 (LEDs indicate charger output stage. Manual three-step charging cycle reset. With 25 feet of cable. Panel Dimensions: 3″ H x 4.75″ W)

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly if you have any problems or concerns.

Save $620 when you purchase the Newmar PT -24- 45U Battery Chargerfor only $1,679 from NVN Marine! Same day dispatch before 3 p.m. Newmar PT-24-45U Battery Charger Technical Specifications

Type:	Automotive/RV \| Charger/Inverter Combos
Vendor:	Newmar Power

Newmar PT-24-45U Battery Charger User ReviewsNewmar PT-24-45U Battery Charger Expeditedtion and returns

For detailed shipping policy, please see our shipping policy and you can find our returns and refund policy here.

/p>