Newmar PT-7 Battery Charger Automotive/RV

PT-7 Battery Charger

Newmar Phase Three battery chargers use "smart" battery charging technology for 12-volt systems onboard applications navies, including work boats, military ships, commercial ships. ships and pleasure boats. This charger interacts with batteries, providing an optimal three-stage charging process for rapid recovery and conditioning, maximizing performance and extending battery life.

A selector switch adjusts the voltage of outlet to fit gel cell flooded lead. -Types of acid or AGM batteries. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. This model is housed in a sturdy stainless steel housing with a durable white powder coat finish, and internal circuitryrnes are coated with polyurethane for maximum corrosion resistance.

Features:

"Smart" circuit allows charging in three stages : bulk, absorption, float
Gel-CeFlooded ll/lead-acid/AGM battery type switch selects optimal charge/flood voltages
Multiple isolated output banks; The ammeter indicates the total output current. (Except PT-7)
Optional sensor adjusts output voltage based on battery temperature. (Except PT-7)
Current limiting prevents damage from overload
A clean, well-regulated output can be used as a power supply; can power loads directly without an in-line battery
Built to last: Rugged stainless steel housing with a durable white powder coat finish with an optional anti-drip shield and pickled internal circuitry
Protection: Limitatipower supply, thermal protection, forced air cooling, anti-drip protection
ABS type approval for battery charging and power supply

Specifications:

VCA Input (50-60 Hz.): 88-132 or 176-264
Full Load Input Current: @ 115 VAC 2, @ 230 VAC 1
P.F. Rating:> 0.65
Maximum Output Amplifiers: 7
Output Banks: 2
Battery Capacity (amp-hours): 14- 70
Temp. of operation. Rating Reference: T-1
Case Size Reference: A-1
Case Size (H x W x D): 10.5 x 5.0 x 2.8 inches (26.7 x 12.7 x 7.1 centimeters)
Weight Lbs./Kg: 3.2/1.5
Temp. Sensor Model: N/A
Remote Panel Model: N/A
Equalization Option: No
Output Indicator Reference: M-1
Conformity reference: CG, CE

Referencestemperature:

Temperature: -10 degrees C to +45 degrees C
Linear reduction from 100% at 0 degrees C to 80% at -10 degrees C

Rated output voltage at Freeze/Flood switch settings (without Temperature Compensation):

Freeze- Cell: 14.0 VDC Load at 50% load and 13.6 VDC Float at 0.5 A load
Flooded/AGM: 14.2 VDC load at 50% load and 13.4 VDC Float at 0.5 A load

Compliance references:

CG: USCG CFR 183.410 (Protected Ignition)
CE: bears the CE mark
ABS: the PT series complies with SVR 2009 4-8-3/5.9 standards, under 90 meter rules 2006 4-6 -4/7.19 and HSNC 2007 4. -8-3/5.13

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly if you have any problems or concerns.

PRODUCT ID: 102326
SKU: NVN-102326
CSKU: CWR-102326
REWRITE: 113437 -newmar-pt-7-battery-charger
MPN: PT-7
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NEWMAR PT-7 BATTERY CHARGER
NAME_EX:
PTITLE: Newmar PT-7 Battery Charger
TYPE: Automotive /VR | Charger/Inverter Combos
SELLER: Newmar Power
ELECTRONICS> ELECTRONIC ACCESSORIES> POWER

Gtags:

GSpecs:

Product Description of the Newmar PT-7 Battery Charger

PT-7 Battery Charger

Newmar Phase Three Series battery chargers use "battery charging technology" intelligent" for 12 volt systems on board ships. applications including workboats, military vessels, commercial vessels and pleasure craft. This charger interacts with batteries, providing an optimal three-stage charging process for rapid recovery and conditioning, maximizing performance and extending battery life.

A selector switch adjusts the voltage of outlet to fit gel cell flooded lead. -Types of acid or AGM batteries. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. This model is housed in a sturdy stainless steel housing with a finisheddurable white powder ion, and the internal circuitry is coated with polyurethane for maximum corrosion resistance.

Features:

The circuit "smart" provides three-stage harging circuit – bulk, absorption, float
Flooded gel cell/lead acid/AGM battery type switch selects optimal charge/float voltages
Multiple isolated output banks; The ammeter indicates the total output current. (Except PT-7)
Optional sensor adjusts output voltage based on battery temperature. (Except PT-7)
Current limiting prevents damage from overload
A clean, well-regulated output can be used as a power supply; can power loads directly without an in-line battery
Built to last: Rugged stainless steel housing with a durable white powder coat finish with anti-gouge shieldoptional head and internal marinated circuits
Protection: Current limiting, thermal protection, forced air cooling, anti-drip protection
ABS type approval for battery charging and power supply

Specifications:

VCA input (50-60 Hz.): 88-132 or 176-264
Full load input current: @ 115 VAC 2, @ 230 VAC 1
P.F. Rating:> 0.65
Maximum output amps: 7
Output banks: 2
Battery capacity (amp-hours): 14- 70
Temp. Rating Reference: T-1
Case Size Reference: A-1
Case Size (H x W x D): 10.5 x 5.0 x 2.8 inches (26.7 x 12.7 x 7.1 centimeters)
Weight Lbs./Kg: 3.2/1.5
Temp. Sensor Model: N/A
Remote Panel Model: N/A
Equalization Option: No
Output Indicator Reference: M-1
Conf Referenceormitity: CG, CE

Temperature References:

Temperature: -10 degrees C to +45 degrees C
Reduce Linearly from 100% at 0 degrees C to 80% at -10 degrees C

Rated output voltage at freeze/flood switch settings (without compensation temperature):

Gel-Cell: 14.0 VDC charging at 50% load and 13.6 VDC floating at 0.5 A load
Flooded/AGM: 14.2V DC load at 50% load and 13.4V DC floating at 0.5A load

References of conformity:

CG: USCG CFR 183.410 (protected against ignition)
CE: bears the CE mark
ABS : PT series complies with SVR 2009 4-8-3/5.9, under 90 meters Rules 2006 4-6-4/7.19 and HSNC 2007 4-8-3/5.13

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly if you have any problems or concerns.

Save $105 when you purchase the Newmar PT-7 Battery Charger for only $294 from NVN Marine! Same day dispatch before 3 p.m. Newmar PT-7 Battery Charger Technical Specifications

Type:	Automotive/RV \| Charger/Inverter Combos
Vendor:	Newmar Power
Weight:	3.85 lbs

User Reviews of the Newmar PT Battery Charger -7Newmar PT-7 Battery Charger Shipping and Returns

Shipping Weight:	3.85 lbs
Box sizes:	(h) x (l) x (w)
Cubic Feet:	0