Newmar PT-25W battery charger Automotive/RV

PT-25W Battery Charger

Newmar's Phase Three series battery chargers use "smart" battery charging technology for 12-volt to 12-volt systems. onboard marine applications including workboats, military vessels, commercial vessels. ships and pleasure boats. This charger interacts with batteries, providing an optimal three-stage charging process for rapid recovery and conditioning, maximizing performance and extending battery life.

A selector switch adjusts the voltage of outlet to fit gel cell flooded lead. -Types of acid or AGM batteries. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. This model is housed in a sturdy stainless steel housing with a durable white powder coat finish, and theInternal circuits are polyurethane coated for maximum corrosion resistance.

Features:

12 volt model
"Smart" circuitry allows for three-stage charging: bulk, absorption, on, and float
Gel/Flooded Lead-Acid/AGM battery type switch selects optimal charge/float voltages
Multiple isolated output banks; The ammeter indicates the total output current. (Except PT-7)
Optional sensor adjusts output voltage based on battery temperature. (Except PT-7)
Current limitations prevent damage from overload
A clean, well-regulated output can be used as a power supply; can power loads directly without an in-line battery
Built to last: Rugged stainless steel housing with durable white powder coat finish, anti-drip screenoptional and marinized internal circuits
Protection: Current limiting, thermal protection, forced air cooling, anti-drip protection
ABS type approval for battery charging and power supply

Specifications:

VAC input (50-60 Hz.): 90-132 or 180- 264
Full load input current: at 115 VAC: 6.5, at 230 VAC: 4
Power factor: 0.7
Maximum Output Amplifiers: 25
Output Banks: 3
Battery Capacity (amp-hours): 50-250
Temp. Nominal: T-4
Case Size: A-2
Case Size (H x W x D): 11.2A x 7.7 x 4, 75A inches (31.8A x 19.6 x 12.1A centimeters) *Note with Dripshield installed A, add 1.1" (2.8 cm) to height and 0.92" (2.3 cm) to depth
Weight Lbs./Kg: 8.2/4
Temp. optional. Sensor Model: TCS-12/24
Remote Panel Model: RP
Equalizer Option: Yes
Output Meter Reference: M-3
Compliance reference: CG

Temperature references:

Temperature: -20 degrees C to +60 degrees C
Linear reduction from 100% at 50 degrees C to 60% at 60 degrees C

Rated output voltage at Freeze/Flood switch settings (without compensation temperature):

Gel-Cell: 14.0 VDC charging at 50% load and 13.6 VDC floating at 0.5 A load
Flooded/AGM: 14.2VDC load at 50% load and 13.4VDC float at 0.5A load

Compliance References:

CG: USCG CFR 183.410 (ignition protected)
CE: CE marked
ABS: PT series complies with SVR 2009 4-8-3/5.9 standards, rules for less than 90 meters 2006 4-6-4/7.19 and HSNC 2007 4-8-3/5.13.

Optionns:

Remote panel, model RP, for use with all models except PT-7 and PT-40U (LEDs indicate charger output stage. Manual reset of three-stage charging cycle With 25 feet of cable. Panel Dimensions: 3″ H x 4.75″ W)
Temperature Compensation Sensor, Model TCS 12/24, for use with. all models except PT 7 (-5 mV per cell degrees C, 25' cable (40' cable optional)

This product cannot be returned to point of purchase Please contact the manufacturer directly if you have any problems or concerns.

PRODUCT ID: 102334
SKU: NVN-102334
CSKU: CWR-. 102334
REWRITE: 113445-newmar-pt-25w-battery-charger
MPN: PT-25W
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NEWMAR PT-25W BATTERY CHARGER
NAME_EX:
PTITLE: Newmar PT-25W Battery Charger
TYPE: Automotive /RV | Ccharger/inverter combos
SELLER: Newmar Power
ELECTRONICS> ELECTRONIC ACCESSORIES> POWER

Gtags:

GSpecs:

Product Description of Newmar PT-25W Battery Charger

PT-25W Battery Charger

Newmar's Phase Three series battery chargers use advanced charging technology "smart" battery technology for 12-volt systems on board ships applications, including workboats, military ships, commercial ships and pleasure craft. This charger interacts with batteries, providing an optimal three-stage charging process for rapid recovery and conditioning, maximizing performance and extending battery life.

A selector switch adjusts the voltage of outlet to fit gel cell flooded lead. -Types of acid or AGM batteries. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. This model is housed in a robust stainless steel housing withc a durable white powder coat finish, and internal circuitry is polyurethane coated for maximum corrosion resistance.

Features:

12 volt model
"Smart" circuitThe test provides three-stage charging: bulk, absorption and float.
The gel cell/lead-acid battery type switch flooded/AGM selects optimal charge/float voltages
Multiple isolated output banks; The ammeter indicates the total output current. (Except PT-7)
Optional sensor adjusts output voltage based on battery temperature. (Except PT-7)
Current limitations prevent damage from overload
A clean, well-regulated output can be used as a power supply; can power loads directly without an in-line battery
Built to last: Rugged stainless steel housing with p-finishdurable white powder, an optional drip shield and marinized internal circuitry
Protection: Current limiting, thermal protection, forced air cooling, anti-drip protection
Approval of ABS type for battery charging and power supply

Specifications:

VAC input (50-60 Hz .): 90-132 or 180-264
Input current at full load: at 115 VAC: 6.5, at 230 VAC: 4
Power factor: 0 .7
Maximum output amps: 25
Output banks: 3
Battery capacity (amp-hours): 50-250
Temp. of operation. Nominal: T-4
Case Size: A-2
Case Size (H x W x D): 11.2A x 7.7 x 4, 75A inches (31.8A x 19.6 x 12.1A centimeters) *Note with Dripshield installed A, add 1.1" (2.8 cm) to height and 0.92" (2.3 cm) to depth
Weight Lbs./Kg: 8.2/4
Temp. optional. Sensor Model: TCS-12/24
Remote Panel Model: RP
Equalization Option: Yes
Output Indicator Reference: M-3
Compliance reference: CG

Temperature references:

Temperature: - 20 degrees C to +60 degrees C
Linear reduction from 100% at 50 degrees C to 60% at 60 degrees C

Rated output voltage at Gel/Flood switch settings (without temperature compensation):

Gel-Cell: 14.0 VDC charge at 50% load and 13.6 VDC float at 0.5 A load
Flooded/AGM: 14.2 VDC load at 50% load and 13.4 VDC floating at 0.5 A load

Conformity references:

CG: USCG CFR 183.410 (Protected against ignition)
CE: Bears the CE mark
ABS: PT series complies with SVR 2009 4-8-3/5.9, sub 90 meter rules 2006 4-6-4/7.19 and HSNC 2007 4-8-3/5.13.

Options:

Remote panel, RP model, to use with all models except PT-7 and PT-40U (LEDs indicate charger output stage. Three-stage manual charge cycle reset. With 25′ of cable. Panel dimensions: 3″ H x 4 .75″W)
Temperature compensation sensor, model TCS 12/24, for use with all models except PT 7 (-5 mV per cell degrees C, 25 ft. cable (40 ft optional)

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly if you have any problems or concerns.

Save $239 when you purchase the Newmar PT-25W Battery Charger for only $660 b> from NVN Marine! Same day shipping before 3pm Newmar PT-25W Battery Charger Technical Specifications

Type:	Automotive/RV. \|Charger/Inverter Combos
Vendor:	Newmar Power

Newmar PT-25W Battery Charger User ReviewsNewmar PT-25W Battery Charger Shipping & Return

For detailed shipping policy, please see our shipping policy and you can find our policy returns and refunds here.