Newmar PT-24-95U battery charger Automotive/RV

PT-24-95U Battery Charger

"Smart" marine battery charging technology for 24-volt systems aboard workboats, military vessels, commercial ships and pleasure boats. This charger interacts with batteries, providing an optimal three-stage charging process for rapid recovery and conditioning, maximizing performance and extending battery life.

A selector switch adjusts the voltage of outlet to fit gel cell flooded lead. -Types of acid or AGM batteries. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. All models are housed in a rugged stainless steel housing with a durable white powder coat finish, and internal circuitry is polyurethane coated for maximum corrosion resistance.

Features:

24 volt model
"Smart" circuit allows three-stage charging: bulk, absorption, floating battery
Flooded Gel Cell/Lead Acid Battery/AGM Battery Switch Type Senses Optimal Charging/Float Voltages
Multiple Isolated Output Banks; ammeter indicates total output current
Optional sensor adjusts output voltage based on battery temperature
Current limiting prevents damage due to overload overload
Use as power supply; can power loads without an in-line battery
Built to last: Rugged stainless steel housing with a durable white powder coat finish with an optional anti-drip shield and marinized internal circuitry
Protection: current limiting, thermal protection, forced air cooling, anti-drip protection
Install inconjunction with PT-MCU for additional control and monitoring
ABS type approval for battery charging and power supply

Specifications:

Input VAC (50-60 Hz.): 90-264
Input Amps @ Full Load: at 115 VAC: 26, at 230 VAC: 14
Power factor: 0.98 at 115 V and 0.95 at 230 V
Maximum output current: 95
Output banks : 3
Battery capacity (amp-hours): 180 – 950
Temp. of operation. Nominal: T-5
Case Size: A-5
Case Size (H x W x D): 17.5E x 12 x 7.2E inches (44.5E x 30.5 x 18.3E centimeters) *Note with Dripshield installed E, add 2" (5.08 cm) to height and 1" (2.54 cm) to depth
Weight Lbs./Kg: 24.5/11
Temp. optional. Sensor Model: TCS-12/24
Remote Panel Model: RP
Conformity: EN, CE, ABS

Temperature Assessment references:

Temperature: -20 degrees C to +70 degrees C
Linear reduction from 100% at 50 degrees C to 50% at 70 degrees C

Rated output voltage at gel/inode switch settings (without temperature compensation):

Gel-Cell: 28.0 VDC Charge at 50% load and 27.2 VDC floating at 0.5 A load
Flooded/AGM: 28.4 VDC at 50% load and 26.8 VDC floating at 0.5 A load

Compliance References:

UL: UL 1950 (according to DNB report)
CG: USCG CFR 183.410 (Protected against ignition)
EN : EN 60335-1
CE: bears the CE mark
ABS: the PT series complies with SVR 2009 4-8 -3/5.9, Under 90 meter rules 2006 4-6-4/7.19 and HSNC 2007 4-8-3/5.13.

Options:

Remote panel , model RP, for use with all models except PT-24-20U, PT-24-60 and PT-32-25 (LEDs indicate charger output stage. Three-stage manual charge cycle reset. With 25′ of cable. Panel dimensions: 3″ H x 4, 75″ L)

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly with any problems or concerns.

PRODUCT ID: 102333
SKU: NVN-102333
CSKU: CWR-102333
REWRITE : 113444 -newmar-pt-24-95u-battery-charger
MPN: PT-24-95U
UPC:
ASIN:
WSKU:
SSKU:
KSKU :
GSKU:
MSKU:
LSKU:
NAME: NEWMAR PT-24-95U BATTERY CHARGER
NAME_EX:
PTITLE: Newmar PT-24-95U Battery Charger
br>TYPE: Automotive/RV | CHARGER/Inverter Combos
SELLER: Newmar Power
ELECTRONICS> ELECTRONIC ACCESSORIES> POWER

Gtags:

GSpecs:

Newmar PT-24-95U Battery Charger Product Description

PT-24-95U Battery Charger

"Smart" marine battery charging technology for 24 systems volts aboard workboats and military vessels, commercial vessels and pleasure boats. This charger interacts with batteries, providing an optimal three-stage charging process for rapid recovery and conditioning, maximizing performance and extending battery life.

A selector switch adjusts the voltage of outlet to fit gel cell flooded lead. -Types of acid or AGM batteries. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. All models are housed in a rugged stainless steel housing with a durable white powder coat finish, and the internal circuitry is coated in polyurethane.for maximum corrosion resistance.

Features:

24 volt model
The "smart" circuit allows three-stage charging: bulk, absorption, float
Gel cell/flooded lead-acid/AGM battery type switch selects optimal charge/flood voltages
Multiple isolated output banks; ammeter indicates total output current
Optional sensor adjusts output voltage based on battery temperature
Current limiting prevents damage due to overload overload
Use as power supply; can power loads without an in-line battery
Built to last: Rugged stainless steel housing with a durable white powder coat finish with an optional anti-drip shield and marinized internal circuitry
Protection: current limitation, thermal protection, forced air cooling, protectionanti-drip
Install in conjunction with PT-MCU for additional control and monitoring
ABS type approval for battery charging and power supply

Specifications:

VAC Input (50-60 Hz.): 90-264
Input Amps @ Full Charge: at 115 VAC: 26, at 230 VAC: 14
Power factor: 0.98 at 115 V and 0.95 at 230 V
Maximum output current : 95
Output Banks: 3
Battery capacity (amp-hours): 180 – 950
Temp. of operation. Nominal: T-5
Case Size: A-5
Case Size (H x W x D): 17.5E x 12 x 7.2E inches (44.5E x 30.5 x 18.3E centimeters) *Note with Dripshield installed E, add 2" (5.08 cm) to height and 1" (2.54 cm) to depth
Weight Lbs./Kg: 24.5/11
Temp. optional. Sensor Model: TCS-12/24
Fault Modelto remote: RP
Conformity reference: EN, CE, ABS

Temperature Evaluation references:

Temperature: -20 degrees C to +70 degrees C
Linear reduction from 100% at 50 degrees C to 50% at 70 degrees C

Rated output voltage at Gel/Inode switch settings (without temperature compensation):

Gel-Cell: 28.0 VDC Load at 50% load and 27 .2 VDC floating at 0.5 A load
Flooded/AGM: 28.4 VDC at 50% load and 26.8 VDC floating at 0.5 A load

Conformity references:

UL: UL 1950 (according to DNB report)
CG: USCG CFR 183.410 (protected against ignition)
EN: EN 60335-1
CE: bears the CE marking
ABS: the PT series complies with SVR 2009 4 standards -8-3/5.9, under 90 meters rules 2006 4-6-4/7.19 and HSNC 2007. 4-8-3/5.13.

Options:

Remote panel,RP model, for use with all models except PT-24-20U, PT-24-60 and PT-32-25 (LEDs indicate charger output stage. Manual three-stage charging cycle reset. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W)

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly if you have any problems or concerns.

Save $980 when you purchase the Newmar PT -24- 95U Battery Chargerfor only $2,619 from NVN Marine! Same day dispatch before 3 p.m. Newmar PT-24-95U Battery Charger Technical Specifications

Type:	Automotive/RV \| Charger/Inverter Combos
Vendor:	Newmar Power

Newmar PT-24-95U Battery Charger User ReviewsNewmar PT-24-95U Battery Charger Shipping andreturn

For detailed shipping policy, please see our shipping policy and you can find our return and refund policy here.

/p>