Newmar PT-24-95U 24V 95A Charger 110/230V Input Electrical

Phase Three Series 95 Amp Battery Charger, 24 VDCThe "smart" charger for almost any applicationPhase Three "Smart" battery charging technology lets you select the size, features and flexibility you need for virtually any application, from small pleasure craft to large cruise ships, workboats and other commercial vessels. These chargers interact with the batteries to subject them to the optimal three-stage charging process that allows for faster recovery and ideal conditioning, maximizing battery performance and extending its life. A selector switch adjusts the output voltage to accommodate gel cell/flooded lead acid/AGM battery types. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. All modsThey are housed in a rugged stainless steel housing with a choice of natural or durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance./p>Attributes of the NewMar PT2495U

Number of Banks: 3
Application: AGM/Flooded/Gel Batteries
Output Voltage: 24 Volts
Input Voltage: 115 to 230 Volts
Ampere Rating: 95 Amps Load
Universality: Completely Universal
Length (IN): 17-1/2 inches
Width (IN): 12 inches
Height (IN): 7-1/2 inches

NewMar PT2495U Features and Benefits

Intelligent circuitry enables charging in three stages: bulk, absorption, floating.
Multiple isolated output banks; Ammeter indicates total output current.
Optional sensor adjusts output voltage based on battery temperature.
Limitatione current - prevents damage from overcharging.
Charger status is clearly displayed with LED, ammeter or remote panel
Use as power supply; can power non-battery loads in-line.
Optional drip shield and marinized internal circuitry.
Many safety and EMC compliance standards
Two years parts & lab or warranty

Three-stage "smart" chargers

Stage three "smart" battery charging technology is now available in a wide range of power levels power, allowing you to select the right size, features and flexibility you need for virtually any application, from small pleasure craft to large cruise ships, workboats and other commercial vessels. These chargers interact with the batteries to subject them to the optimal three-step charging process thatallows for faster recovery and ideal conditioning, maximizing battery performance and extending battery life.

A selector switch adjusts the output voltage to accommodate gel-cell battery types/ flooded lead-acid/AGM. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. All models are housed in a rugged stainless steel housing with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.support.

Features

The "smart" circuit allows charging in three stages: bulk, absorption, floating.
A wide range of models covers battery system ratings from 14 to 950 amp hours
The gel cell battery type switchées/lead-acid flooded/AGM selects optimal charge/float voltages.
Multiple isolated output banks; The ammeter indicates the total output current. (except PT-7)
Optional sensor adjusts output voltage based on battery temperature. (except PT-7)
Current limitation to prevent damage due to overload.
The status of the charger is clearly displayed with an LED. and/or optional audible indicators or remote panel.
Use as power supply; can power loads without a battery online.
Built to last? Rugged stainless steel housing with a durable white powder coat finish with an optional anti-drip shield and marinized internal circuitry.
Extensive safety and EMC complianceDouble years warranty on parts and labor

Models

12 Volts

24 Volts

32 Volts

PT-7

PT-24-8W

PT- 32-25W

PT-14W

PT-24-13W

PT- 25W

PT-24-20U

PT-40U

PT-24-45U

PT-80

PT-24-60W

PT-24-95U

Detailed specifications below.

Specifications

12 volt models	PT -7	PT-14W	PT-25W	PT-40W	PT-80
VAC input ( 50-60 Hz.)	88-132 or 176-264	85-264	90-132 or 180-264	85-135 or 170-270	90-264
Full Load Input Amps
@ 115 VAC	2	2.8	6.5	8.5	12
@ 230 VAC	1	1.4	4	4.3	7
P.F. Note	>.65	.93@230V . 98@115V	.7	.7	.95@230V .98@115V
Maximum output intensities	7	14	25	40	80
Output banks	2	3	3	3	3
Battery capacity (amps- hours)	14-70	28-140	50-250	80-400	160-800
Operating temp. Rated reference	T-1	T-2	T-4	T-5	T-7
Case size Ref.	A-1	A-2	A-2	A-3	A-5
Weight; Lbs./Kg.	3.2/1.5	8/4	8.2/4	12/6	15.2/ 7
Optional temperature sensor model	N/A	TCS-12 /24	TCS -12/24	TCS-12/24	TCS-12 /24
Remote panel template	N/A	RP	RP	RP	RP
Equalizer option	No	Yes	Yes	Yes	Yes
Df. output indicator	M-1	M-3	M-3	M-3	M-3
Ref. of conformity.	CG, CE	CG, CE	CG	CG, CE	CE

24 Volt Models	PT-24-8W	PT -24-13W	PT-24-20U	PT -24 -45U	PT-24-60W	PT-24 -95U
VAC input (50-60 Hz.)	85-264	90-132 or 180-264	85-135 or 170-270	90-264	207-253	90-264
Full Load Input Amps
@ 115 VAC	2.8	6.5	8.5	12	NA	26
@ 230 VAC	1.4	4	4.3	7	13	14
P.F. Note	.93@230V .98@115V	.7	.7	.95@230V . 98@115V	.7	.95@230V .98@115V
Maximum Output Amps	8	13	20	45	60	95
Output banks	3	3	3	3	3	3
Battery capacity (amp-hours)	16-80	26-130	40-200	90-450	120 -600	180-950
Operating temperature Nominal reference	T-2	T-3	T -5	T -8	T-6	T-8
Case size Ref.	A-2	A-2	A-3	A-5	A-6	A-6
Weight; Lbs./Kg.	8/4	8.2/4	12/6	12.2/6	24.1/11	24.5/11
Optional Temperature sensor model	TCS-12/24	TCS-12 /24	TCS-12/24	TCS-12/24	TP	TCS-12/24
Remote Panel Model	RP	RP	RP	RP	N/A	RP
Equalizer option	Yes	Yes	Yes	Yes	No	Yes
Ref. output indicator	M-3	M-3	M-3	M-3	M-2	M-3
Compliance Ref.	CG, CE	CG	CG, CE	EN, CE	EN, CE	EN, CE

32 volt model	PT- 32-25W
VAC input (50-60 Hz.)	104-126
Input Amps at Full Load
@ 115 VAC	15
@ 230 VAC	N/A
P.F. Note	.7
Maximum Amplifier Output	25
Output banks	3
Battery capacity (amp-hours)	50-250
Operating temp. Nominal reference	T-6
Ref. enclosure size	A-4
Weight; Lbs./Kg.	12.2/6
Optional temperature sensor model	TP
Remote panel template	N/A
Equalizer option	No
Ref. output indicator.	M-2
Conformity Ref.	EN, CE

Case Size

	Inches			Centimeters
Ref	H	W	D	H	W	D
A-1	10.5	5.0	2.8	26.7	12.7	7.1
A- 2	12.5	7.7	4.3	31.8	19.6	10.9
A-3	13.85*	9.5	4.8*	35.2*	24.1	12.2*
A-4	13.8A	9.8	5A	35A	24.9	12.7A
A-5	14.8B	9.6	5.6B	37.6B	24.4	14.2B
A-6	17.5C	12	7.2C	44.5C	30.5	18.3C
* Add 0 .75" (1.9 cm) in height and 1.35" (3.4 cm) in depth A Add 1.27" (3.2 cm) in height and 1.1" ( 2.8 cm) to depth B Add 1" (2.54 cm) to height and 0.5" (1.27 cm) to depth C Add 2" (5.08 cm) at height and 1" (2.54 cm) at depth

Temperature assessment references:

T-1	-10°C to +45°C ; Linear derating from 100% at 0°C to 80% at -10°C
T-2	-10°C to +60°C; Linear derating from 100% at 40°C to 60% at 60°C
T-3	-10°C to +60°C; Linear derating from 100% at 50°C to 60% at 60°C
T-4	-10°C to +60°C; Linear derating from 100% at 40°C to 60% at 60°C
T-5	-40°C to +60°C; Linear derating from 100% at 50°C to 75% at 60°C
T-6	-20°C to +50°C; Full output
T-7	-20°C to +70°C; Linear derating from 100% at 45°C to 50% at 70°C
T-8	-20°C to +70°C; Linear derating from 100% at 50°C to 50% at 70°C

Output Indicator References

M-1	Total output ammeter
M-2	Charge/Float L.E.D.
M-3	Total output ammeter and charger status LEDs/alarms

Compliance references*
See matrix for applicable models
CG USCG CFR 183.410 (Protected against ignition)
EN EN 60335-1, EN 60335-2-29
CE bears the CE mark
* Many other safety compliances and EMC may also apply. Contact factory for additional compliance
information is required.

Output voltages rated at freeze/flood switch settings
(without temperature compensation option installed or at 22.2 °C (72 °F) with temperature compensation option
installed)

	12 volt models		24 volt models		32 volt model
	Load	Float	Load	Float	Load	Floating
Settings	@ 50% load	@ 0.5 amp load	@ 50% load	@ 0.5 amp load	@ 50% load	@ 0.5 amp load
Gel-Cell	14.0 VDC	13.6 VDC	28.0 VDC	27.2 VDC	37.3 VDC	36.2 VDC
Flooded/AGM	14.2 VDC	13.4 VDC	28.4 VDC	26. 8 VDC	37.8 VDC	35.7 VDC

"Smart" charger stage at three-stage Now, three-stage "smart" battery charging technology suits different power levels, allowing you to choose the right size, function and flexibility... -newmar-pt-24-95u-24v- 95a-charger-110-230v-input
MPN: PT-24-95U
UPC: 00728072345606
ASIN: B008BAM5IG
WSKU: NEWPT2495U
SSKU: NMR-PT-24-95U
br>KSKU: NMRPT2495U
GSKU:
MSKU:
LSKU:
NAME: Newmar PT-24-95U 24V 95A Charger 110/230V Input
br>NAME_EX:
PTITLE: Newmar PT-24-95U 24v 95A Charger 110/230V Input
TYPE: Electric | Battery Chargers
SELLER: NewMar

Automotive Parts & Accessories

Newmar PT-24-95U 24V 95A Charger 110/230V Input
br> Automotive Parts and Accessories
Gtags:

GSpecs:

Newmar PT-24-95U 24V 95A Charger 110/230V Input Product Description

95A Phase Three Series Battery Charger, 24VDCThe "Smart" Charger for Almost Any ApplicationThe "Smart" Battery Charging Technology phase three allows you to select the right size, features and flexibility you need for virtually any application, from small pleasure craft to large cruise ships, workboats and other commercial vessels. These chargers interact with the batteries to subject them to the optimal three-stage charging process that allows for faster recovery and ideal conditioning, maximizing battery performance and extending its life. A selector switch adjusts the output voltage to accommodate gel cell/flooded lead acid/AGM battery types. An optional temperature compensation sensor also adjusts the output for a voltageideal ion according to changes in ambient temperature of the batteries. All models are housed in a rugged stainless steel housing with a choice of natural or durable white powder-coated finish, and the interior circuitry is polyurethane coated for maximum corrosion resistance.

NewMar PT2495U Attributes

Number of Banks: 3
Application: Batteries AGM/Flooded/Frost
Output voltage: 24 volts
Input voltage : 115 to 230 volts
Ampere rating: 95 Amp load
Universality: Fully universal
Length (IN): 17-1/2 inches
Width (IN): 12 inches
Height (IN): 7-1/2 inch

NewMar PT2495U Characteristicsristics and advantages

Intelligent circuitry allows three-stage charging --bulk, absorption, float.
Multiple isolated output banks; Ammeter indicates total output current.
Optional sensor adjusts output voltage based on battery temperature.
Current Limiting - Prevents damage from to overload.
Charger status is clearly displayed with LED, ammeter or remote panel
Use as power supply; can power loads without an in-line battery.
Drip guard and optional marinized internal circuits.
Numerous safety and EMC compliance standards
Guaranteed two years parts and labor

Three-stage "smart" chargers

Stage three "smart" battery charging technology is now widely available range of power levels, allowing you to select the taiit and the appropriate functionalities. and the flexibility you need for virtually any application, from small pleasure craft to large cruise ships, workboats and other commercial vessels. These chargers interact with the batteries to subject them to the optimal three-stage charging process that allows for faster recovery and ideal conditioning, maximizing battery performance and extending its life.

A selector adjusts the output voltage to accommodate gel-cell/flooded lead-acid battery/AGMy types. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. All models are housed in a rugged stainless steel housing with a durable white powder coat finish, and internal circuitry is polyurethane coated for maximum resistance to corrosion.osion.

Features

The "smart" circuit allows charging in three stages: bulk, absorption, floating.
A wide range of models covers battery system ratings from 14 to 950 amp-hours
The gel/lead cell battery type switch -acid flooded/AGM selects optimal charge/float voltages.
Multiple isolated output banks; The ammeter indicates the total output current. (except PT-7)
Optional sensor adjusts output voltage based on battery temperature. (except PT-7)
Current limitation to prevent damage due to overload.
The status of the charger is clearly displayed with an LED. and/or audible indicators or optional mote panel.
Use as power supply; can power loads without a battery online.
Conbuilt to last? Rugged stainless steel housing with a durable white powder coat finish with an optional anti-drip shield and marinized internal circuitry.
Extensive safety and ECE compliance two years parts and labor

Models

12 Volts	24 Volts	32 Volts
PT-7	PT-24-8W	PT-32-25W
PT- 14W	PT-24-13W
PT-25W	PT-24-20U
PT-40U	PT-24-45U
PT -80	PT-24-60W
	PT-24-95U
Detailed specifications below.

Specifications

Maximum output amplifiers

12 Volt Models	PT-7	PT-14W	PT-25W	PT-40W	PT- 80
VAC input (50-60 Hz.)	88-132 or 176-264	85-264	90-132 or 180-264	85-135 or 170-270	90-264
Input Amps at Full load
@ 115 VAC	2	2.8	6.5	8.5	12
@230 VAC	1	1.4	4	4.3	7
P.F. Note	>.65	.93@230V . 98@115V	.7	.7	.95@230V .98@115V
7	14	25	40	80
Output banks	2	3	3	3	3
Battery capacity (amp-hours)	14 -70	28-140	50-250	80-400	160-800
Temp. of operation. Nominal reference	T-1	T -2	T-4	T-5	T-7
Case size ref.	A-1	A-2	A-2	A- 3	A-5
Weight; Lbs./Kg.	3.2/1.5	8/4	8.2/4	12/6	15.2/7
Optional temperature sensor model	N /A	TCS-12/24	TCS-12/24	TCS-12/24	TCS-12/24
Remote panel template	N/A	RP	RP	RP	RP
Equalizer option	No