Newmar PT-40U Battery Charger Automotive/RV

PT-40U Battery Charger

Newmar Phase Three battery chargers use "smart" battery charging technology for 12-volt systems onboard applications navies, including work boats, military ships, commercial ships. ships and pleasure boats. This charger interacts with batteries, providing an optimal three-stage charging process for rapid recovery and conditioning, maximizing performance and extending battery life.

A selector switch adjusts the voltage of outlet to fit gel cell flooded lead. -Types of acid or AGM batteries. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. This model is housed in a sturdy stainless steel housing with a durable white powder coat finish, and the circuitry indull panels are coated with polyurethane for maximum corrosion resistance.

Features:

12 volt model
The "smart" circuitry allows for three-stage charging: bulk, absorption, on, and float
Flooded gel cell/lead-acid/AGM battery type switch selects optimal charge/float voltages
Multiple isolated output banks; The ammeter indicates the total output current. (Except PT-7)
Optional sensor adjusts output voltage based on battery temperature. (Except PT-7)
Current limitations prevent damage from overload
A clean, well-regulated output can be used as a power supply; can power loads directly without an in-line battery
Built to last: Rugged stainless steel housing with a durable white powder coat finish, an optional anti-drip shield et internal marinized circuits
Protection: Current limiting, thermal protection, forced air cooling, anti-drip protection
ABS type approval for battery charging and power supply

Specifications:

VAC input (50-60 Hz.): 90-264
Full load input current: @ 115 VAC: 6.8, @ 230 VAC: 3.4
Power factor: 0.98 at 115 V and 0.95 at 230 V
Or max output amps: 40
Output banks: 3
Battery capacity (amp-hours): 80-400
Temp. Rating Reference: T-5
Case Size Reference: A-3
Case Size (H x W x D): 13.85B x 9.5 x 4 .8B inches (35.2B x 24.1 x 12.2B centimeters) *Note with Dripshield installed B, add 0.75" (1.9 cm) to height and 1.35" (3.4 cm) at depth
Weight Lbs./Kg: 11/6
Temp. optional. Sensor model: TCS-12/24
Remote Panel Model: EVM-12-2
Equalizer Option: No
Output Indicator Reference: M-3
li>
Compliance reference: CG

Temperature references:

Temperature: -20 degrees C to + 70 degrees C
Linear reduction from 100% at 50 degrees C to 50% at 70 degrees C

Rated output voltage at Gel/ switch settings Flooded (without temperature compensation):

Gel-Cell: 14.0 VDC charge at 50% load and 13.6 VDC float at 0 load, 5 A
Flooded/AGM: 14.2 VDC Load at 50% load and 13.4 VDC Float at 0.5 A load

References of conformity:

CG: USCG CFR 183.410 (Protected against ignition)
CE: bears the CE mark
ABS : PT series complies with SVR 2009 4-8-3/5.9, rules for less than 90 meters 2006 4-6-4/7.19 and HSNC 2007 4-8-3/5.13.

Options :

Remote panel, model EVM-12 -2, for us with model PT-40 only (allows you to monitor when the battery charger is "on" and battery readiness status, at a glance on two (2) battery banks only)
Temperature Compensation Sensor, Model TCS 12/24, for use with all models except PT 7 (-5 mV per cell degrees C, 25 ft cable (40 ft cable optional)

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any problems or concerns.

PRODUCT ID: 102335
SKU: NVN-102335
CSKU: CWR-102335
REWRITE : 113446-newmar-pt-40u-battery-charger
MPN: PT-40U
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NEWMAR PT40U BATTERY CHARGER
NAME_EX: PTITLE: Newmar PT-40U Battery Charger
TYPE: Automotive/RV Co |mbos charger/inverter
SELLER: Newmar Power
ELECTRONICS> ELECTRONIC ACCESSORIES> POWER

Gtags:

GSpecs:

Product Description of the Newmar PT-40U Battery Charger

PT-40U Battery Charger

Newmar Phase Three Series battery chargers use "battery charging technology" "Intelligent" for 12-volt systems in shipboard applications, including workboats, military ships, commercial ships and pleasure craft. This charger interacts with batteries, providing an optimal three-stage charging process for rapid recovery and conditioning, maximizing performance and extending battery life.

A selector switch adjusts the voltage of outlet to fit gel cell flooded lead. -Types of acid or AGM batteries. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. This model is housed in a sturdy stainless steel housing with a fidurable white powder coat finish, and internal circuitry is polyurethane coated for maximum corrosion resistance.

Features:

Model 12 volts
"Smart" circuitThe test provides charging in three stages: bulk, absorption and float.
The gel cell/flooded lead acid/battery type switch AGM selects optimal charge/float voltages
Multiple isolated output banks; The ammeter indicates the total output current. (Except PT-7)
Optional sensor adjusts output voltage based on battery temperature. (Except PT-7)
Current limitations prevent damage from overload
A clean, well-regulated output can be used as a power supply; can power loads directly without an in-line battery
Built to last: rugged stainless steel housing with a white powder coat finishdurable reed, an optional drip shield and marinized internal circuitry
Protection: Current limiting, thermal protection, forced air cooling, drip protection
Type approval ABS for battery charging and power supply

Specifications:

VAC input (50-60 Hz. ): 90-264
Full load input current: @ 115 VAC: 6.8, @ 230 VAC: 3.4
PowerFactor: 0.98 to 115 V and 0.95 at 230 V
Maximum output amps: 40
Output banks: 3
Battery capacity (amp-hours): 80-400
Temp. of operation. Rating Reference: T-5
Case Size Reference: A-3
Case Size (H x W x D): 13.85B x 9.5 x 4 .8B inches (35.2B x 24.1 x 12.2B centimeters) *Note with Dripshield installed B, add 0.75" (1.9 cm) to height and 1.35" (3.4 cm) at depth
Weight Lbs./Kg: 11/6
Temp. optional. Sensor Model: TCS-12/24
Remote Panel Model: EVM-12-2
Equalization Option: No
Sensor Part Number: output indicator: M-3
Compliance reference: CG

Temperature references:

Temperature: -20 degrees C to +70 degrees C
Linear reduction from 100% at 50 degrees C to 50% at 70 degrees C

Voltage rated output at Freeze/Flood switch settings (without temperature compensation):

Gel-Cell: 14.0 VDC load at 50% load and 13.6 VCCFloating at 0.5A load
Flooded/AGM: 14.2VDC load at 50% load and 13.4VDC Floating at 0.5A load

Conformity references:

CG: USCG CFR 183.410 (protected against ignition)
CE: door CE marking
ABS: the PT series meets SVR 2009 4-8-3/5.9, Rules for less than 90 meters 20064-6-4/7.19 and HSNC 2007 4-8-3/5.13.

Options:

Remote panel, model EVM-12-2, for us with model PT-40 only (allows you to monitor when the battery charger is "on" and battery readiness, an overview of two (2) battery banks only)
Temperature Compensation Sensor, Model TCS 12/24, for use with all models except PT 7 (- 5 mV per cell degrees C, 25' cable (40' cable optional)

This product cannot be returned to the original point of purchase. Please contact directly. manufacturer in the event of a problem or concern.

Save $395 on the purchase of the Newmar PT Battery Charger -40Uuh for only $1,069 from NVN Marine! Same day shipping before 3pm Newmar PT-40U Battery Charger Technical SpecificationsType:

Automotive/RV \| Charger/Inverter Combos
Vendor:	Newmar Power

Newmar PT-40U Battery Charger User ReviewsNewmar PT-40U Battery Charger Shipping & Return

For detailed shipping policy, please see our shipping policy and you can find our policy returns and refunds here.