Newmar PT14W 12V 3 Bank 14A Charger Electrical

Phase Three Series 14 Amp Battery ChargerThe "smart" charger for almost any applicationPhase Three's "Smart" battery charging technology lets you select the size, features and flexibility you need for virtually any applications from small pleasure craft to large pleasure boats. on board, workboats and other commercial vessels. These chargers interact with the batteries to subject them to the optimal three-stage charging process that allows for faster recovery and ideal conditioning, maximizing battery performance and extending its life. A selector switch adjusts the output voltage to accommodate gel cell/flooded lead acid/AGM battery types. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. All modsThey are housed in a rugged stainless steel housing with a choice of natural or durable white powder-coated finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.

NewMar PT14W Attributes

Number of banks: 3
Application: 12 volt batteries
Output voltage: 12 volts
Input voltage: 115 To 230 volts
Amperage rating: 14 amp load
Universality: Completely universal
Length (IN): 12-1/2 inches
Width (IN): 7.7 inches
Height (IN): 4.3 inches

Features and benefits of the NewMar PT14W

Intelligent circuitry allows charging in three stages - bulk, absorption, float.
Multiple isolated output banks; Ammeter indicates total output current.
Optional sensor adjusts output voltage based on battery temperature.
Limitationof current - prevents damage from overcharging.
Charger status is clearly displayed with optional LED, ammeter or remote panel.
Use as a power supply; can power loads without an in-line battery.
Drip guard and optional marinized internal circuits.
Numerous safety and EMC compliance standards
Guaranteed two years parts and labor

Three-stage "smart" chargers

Stage three "smart" battery charging technology is now widely available range of power levels, allowing you to select the appropriate size, features and specifications. flexibility you need for virtually any application, from small pleasure craft to large cruise ships, workboats and other commercial vessels. These chargers interact with the batteries to subject them to the processOptimal three-stage charging system that allows for faster recovery and ideal conditioning, maximizing battery performance and extending its life.

A selector switch adjusts the output voltage to suit the gel-cell/flooded lead-acid/AGM battery types. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. All models are housed in a rugged stainless steel housing with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.

Features

The "smart" circuit allows charging in three stages: bulk, absorption, float.
Wide model range covers battery system ratings from 14 to 950 amp hours
Battery type switch to thisGelled/Flooded Lead Acid/AGM cells selects optimal charge/float voltages.
Multiple isolated output banks; The ammeter indicates the total output current. (except PT-7)
Optional sensor adjusts output voltage based on battery temperature. (except PT-7)
Current limitation to prevent damage due to overload.
The status of the charger is clearly displayed with an LED. and/or optional audible indicators or remote panel.
Use as power supply; can power loads without a battery online.
Built to last? Rugged stainless steel housing with a durable white powder coat finish with an optional anti-drip shield and marinized internal circuitry.
Extensive safety and EMC complianceDouble years for parts and warranty without charge

Modeles

12 Volts	24 Volts	32 Volts
PT- 7	PT-24-8W	PT-32- 25W
PT-14W	PT-24-13W
PT-25W	PT-24-20U
PT-40U	PT-24-45U
PT-80	PT-24-60W
	PT-24-95U
Detailed specifications below.

Specifications

12 volt models	PT-7	PT-14W	PT-25W	PT-40W	PT-80
VAC input (50-60 Hz.)	88-132 or 176-264	85-264	90-132 or 180-264	85-135 or 170-270	90-264
Input Amps at Full Load
@115 VAC	2	2.8	6, 5	8.5	12
@ 230 VAC	1	1.4	4	4.3	7
P.F. p>	>.65	.93@230V .	.7	.7	.95@230V .98@115V
Intensities of maximum output	7	14	25	40	80
Output banks	2	3	3	3	3
Battery capacity (amp-hours)	14-70	28-140	50-250	80 -400	160 -800
Operating temp. Nominal reference	T-1	T-2	T -4	T-5	T-7
Case size Ref.	A-1	A-2	A-2	A-3	A-5
Weight; Lbs./Kg.	3.2/1.5	8/4	8.2/4	12/6	15.2/7
Optional temperature sensor model	N/A	TCS-12/24	TCS-12/24	TCS-12/24	TCS-12/24
Remote Panel Model	N/A	RP	RP	RP	RP
Equalizer option	No	Yes	Yes	Yes	Yes
Ref. output indicator.	M-1	M-3	K-3	K-3	M-3
Ref. compliance	CG, CE	CG, CE	CG	CG, CE	CE

24 Volt Models	PT-24-8W	PT- 24-13W	PT-24-20U	PT-24- 45U	PT-24-60W	PT-24-95U
VAC input (50-60 Hz.)	85 -264	90-132or 180-264	85-135 or 170-270	90-264	207-253	90 -264
Input Amps at Full Load
@115 VAC	2.8	6.5	8.5	12	NA	26
@ 230 VAC	1.4	4	4.3	7	13	14
P.F. index	.93@230V .98@115V	.7	.7	.95@230V .98@115V	.7	.95@ 230 V .98@115V
Maximum output amps	8	13	20	45	60	95
Output banks	3	3	3	3	3	3
Battery capacity (amp-hours)	16-80	26-130	40-200	90-450	120-600	180-950
Temp. of operation. Nominal reference	T-2	T -3	T-5	T-8	T-6	T-8
Ref. Case size.	A-2	A-2	A-3	A -5	A-6	A-6
Weight; Lbs./Kg.	8/4	8.2/4	12/6	12.2/6	24.1/11	24.5/11
Temperature sensor model inoption	TCS-12/24	TCS-12/24	TCS-12/24	TCS-12/24	TP	TCS-12/24
Remote Panel Model	RP	RP	RP	RP	N/A	RP
Equalizer option	Yes	Yes	Yes	Yes	No	Yes
Ref. output indicator	M-3	M-3	M-3	K-3	K-2	M-3
Compliance Ref.	CG, CE	CG	CG , CE	EN, CE	EN, CE	EN, CE

32 volt model	PT-32-25W
VAC input (50-60 Hz.)	104-126
Full Load Input Currents
@115 VAC	15
@ 230 VAC	N/A
P.F. Note	.7
Maximum output Amps	25
Output Banks	3
Battery capacity (amp-hours)	50-250
Temp. of operation. Nominal reference	T-6
Ref. case size	A-4
Weight; Lbs./Kg.	12.2/6
Optional temperature sensor model	TP
Remote panel template	N/A
Equalizer option	No
Ref. output indicator.	M-2
Conformity Ref.	EN, CE

Case Size

	Inches			Centimeters
Ref	H	W	D	H	W	D
A-1	10.5	5.0	2.8	26.7	12.7	7.1
A-2	12.5	7.7	4.3	31.8	19.6	10.9
A-3	13.85*	9.5	4.8*	35.2*	24.1	12.2 *
A-4	13 .8A	9.8	5A	35A	24.9	12.7A
A-5	14.8B	9.6	5 .6B	37.6B	24.4	14.2B
A- 6	17.5C	12	7.2C	44.5C	30.5	18.3C
* Add 0.75" (1.9 cm) to height and 1.35" (3.4 cm) to depth A Add 1.27" (3.2 cm) to the height and 1.1" (2.8 cm) to the depth B Add 1" (2.54 cm) to the height and 0.5" (1.27 cm) to the depth br> C Add 2" (5.08 cm) to the height and 1" (2.54 cm) to the depth

Index references temperature:

T-1	-10°C to +45°C; Linear derating from 100% at 0°C to 80% at -10°C
T- 2	-10°C to +60°C; Linear derating from 100% at 40°C to 60% at 60°C;
T-3	-10°C to +60°C; Linear derating from 100% at 50°C to 60% at 60°C; °C
T-4	-10°C to +60°C; Linear derating from 100% at 40°C to 60% at 60°C
T-5	-40°C to +60°C; Linear derating from 100% at 50°C to 75% at 60°C
T-6	-20°C to +50°C; Full output
T-7	-20°C to +70°C; Linear derating from 100% at 45°C to 50% at 70°C
T-8	-20°C to +70°C; Linear derating from 100% at 50°C to 50% at 70°C

Output Indicator References

M-1	Total output ammeter
M-2	Charge/L.E.D. Float
M- 3	Total output ammeter and charger status LEDs/alarms

Compliance references*
See matrix for applicable models
CG USCG CFR 183.410 (Protected against ignition)
EN EN 60335-1, EN 60335-2-29
CE bears the CE mark
*Many other safety and EMC compliances may also apply. Contact factory if additional compliance information is required.

Rated output voltages at frost/flood switch settings
(Without temperature compensation option installed or at 22.2° C (72°F) with the temperature compensation option
installed.)

	12 Volt Models		24 Volt Models		32 Volt Model
	Load	Float	Load	Float	Load	Float
Parameter	@ 50% load	@ 0.5 A load	@ 50% load	@ 0.5 amp load	@ 50% load	@ 0.5 amp load
Gel-Cell	14.0 VDC	13.6 VDC	28.0 VDC	27.2 VDC	37.3 VDC	36, 2 VCC
Flooded/AGA	14.2 VDC	13.4 VDC	28.4 VDC	26 .8 VDC	37.8 VDC	35.7 VDC

Intelligent battery charging technology third stage of the three-phase smart charger is now available in a wide range of power levels, allowing you to choose the right size, function and...
PRODUCT ID: 1001190
SKU: NVN-1001190
CSKU: CWR-1001190
REWRITE: 1012301-newmar-pt14w-12v-charger -3-bank-14
MPN: PT-14W
UPC:
ASIN: B00KOEN0Y0
WSKU: NEWPT14W
SSKU: NMR-PT-14W
KSKU: NMRPT14W
GSKU:
MSKU:
LSKU:
NAME: Newmar PT14W 12V 3-Bank 14 Amp Charger
NAME_EX :
PTITLE: Newmar PT14W 12V 3 Bank 14 Amp Charger
TYPE: Electric | Battery Chargers
SOLD: NewMar

CE

Newmar PT14W 12V 3 Bank 14 Amp Charger
CE
br>Gtags:

Boat

GSpecs:

Newmar PT14W 12V, 3 Bank, 14A Charger Product Description

14A Phase Three Battery Charger SeriesThe "smart" charger for almost any applicationPhase three "smart" battery charging technology allows you to select the right size, features and flexibility you need for virtually any application, from small pleasure craft to large cruise ships, workboats and other commercial vessels. These chargers interact with the batteries to subject them to the optimal three-stage charging process that allows for faster recovery and ideal conditioning, maximizing battery performance and extending its life. A selector switch adjusts the output voltage to accommodate gel cell/flooded lead acid/AGM battery types. An optional temperature compensation sensor also adjusts the output for ideal voltage based ons changes in ambient battery temperature. All models are housed in a rugged stainless steel housing with a choice of natural or durable white powder coated finish, and the internal circuitry is polished urethane coated for maximum corrosion resistance.

Attributes of the NewMar PT14W

Number of banks: 3
Application: 12 Volt Batteries
Output Voltage: 12 Volts
Input Voltage : 115 to 230 volts
Rated current: 14 amp load
Universality: Fully universal
Length (IN): 12-1/2 inches
Width (IN): 7.7 inches
Height (IN): 4.3 inches

NewMar PT14 Features and BenefitsW

Intelligent circuitry allows three-stage charging: bulk, absorption, float.
Multiple isolated output banks; The ammeter indicates the total output current.
An optional sensor adjusts the output voltage based on battery temperature.
Current limiting: prevents damage due to to overload.
Charger status is clearly displayed with an optional LED, ammeter or remote panel.
Use as a power supply; can power loads without an in-line battery.
Drip guard and optional marinized internal circuits.
Numerous safety and EMC compliance standards
Guaranteed two years parts and labor

Three-stage "smart" chargers

Stage three "smart" battery charging technology is now widely available range of power levels, allowing you to select the tappropriate functionality and functionality. and the flexibility you need for virtually any application, from small pleasure craft to large cruise ships, workboats and other commercial vessels. These chargers interact with the batteries to subject them to the optimal three-stage charging process that allows for faster recovery and ideal conditioning, maximizing battery performance and extending its life.

A selector adjusts output voltage to accommodate gel-cell/flooded lead-acid/AGM battery types. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in the batteries' ambient temperature. All models are housed in a rugged stainless steel housing with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum strength.prone to corrosion.

Features

The "smart" circuit allows charging in three stages: bulk, absorption, floating.
A wide range of models covers battery system ratings from 14 to 950 amp-hours
The gel/lead cell battery type switch -acid flooded/AGM selects optimal charge/float voltages.
Multiple isolated output banks; The ammeter indicates the total output current. (except PT-7)
Optional sensor adjusts output voltage based on battery temperature. (except PT-7)
Current limitation to prevent damage due to overload.
The status of the charger is clearly displayed with an LED. and/or optional audible indicators or remote panel.
Use as power supply; can power loads without a battery online.
Built to last? Rugged stainless steel housing with a durable white powder coat finish with an optional anti-drip shield and marinized internal circuitry.
Extensive safety and ECE compliance two years parts and labor

Models

12 Volts	24 Volts	32 Volts
PT-7	PT-24-8W	PT-32-25W
PT- 14W	PT-24-13W
PT-25W	PT-24-20U
PT-40U	PT- 24-45U
PT-80	PT-24-60W
	PT-24-95U
Specifications detailed below.

Specifications

12 volt models	PT-7	PT-14W	PT- 25W	PT-40W	PT-80
VAC input (50-60 Hz.)	88 -132 or 176-264	85-264	90-132 or 180-264	85 -135 or 170-270	90-264
Input Amps @ Full Charge
@ 115 VAC	2	2.8	6.5	8.5	12
@ 230 VAC	1	1.4	4	4.3	7
P.F. Note	>.65	.93@230V 98@115V	.7	.7	.95@230V .98@115V
Maximum Output Amps	7	14	25	40	80
Output banks	2	3	3	3	3
Battery capacity (amp-hours)	14-70	28-140	50-250	80-400	160-800
Operating temp. Nominal reference	T-1	T-2	T-4	T -5	T-7
CaseSize Ref.	A-1	A-2	A-2	A-3	A-5
Weight; Lbs./Kg.	3.2/1.5	8/4	8.2/4	12/6	15.2/7
Temperature sensor model optional	N/A	TCS-12/24	TCS-12/24	TCS-12/24	TCS-12/24
Remote Panel Model	N/A	RP	RP	RP	RP
EquaOption lize