No-Drill RAM Bracket for '14-19 Chevrolet Silverado Ram Mount Store

No-Drill Bracket for 2014-19 Chevrolet Silverado

This RAM No-Drill™ mounting system installs quickly and easily in a range of Chevrolet and GMC vehicles using existing passenger side seat rail hardware. This configuration offers a telescopic function ranging from 12" to 18". Dual swing arms provide 12 inches of articulation and reach to allow passengers and driver access to the mounted unit. The round ball base attached to the end of the swing arm supports a variety of tablet and laptop mounts, while RAM rubber ball and socket technology provides additional adjustability as well as isolation against shock and vibration.

Features:

RAM No-Drill™ base provides low profile mounting; the telescopic pole allows height adjustments
The double articulated swing arm pallows ideal placement of the device; compatible with a variety of tablet and laptop stands
Made of high-strength powder-coated steel and composite
Backed by a lifetime warranty
Plate Size: 2.5"
Ball/Socket Size: C Size (1.5")
Materials: Powder Coated Steel, Marine Grade - Aluminum

Hole pattern:

AMPLI 4 holes: 1.181" x 1.496"
3 -Hole 120 degrees: 1.812" diameter

Additional information:

This base is best used in bucket seat vehicles with a full center console For 2014 and 2015 trucks with a 40/20/40 bench seat, RAM-VB-191 is also an option. To install this base, the plastic trim closest to the passenger door may need to be installed. be cut or modified to fit the RAM No-Drill™ base once installed.re done in your vehicle, or if you are not comfortable with it, you should not purchase this product. Note that the RAM-VB-191 will not work with the 4x4 lever. on the central hump of the vehicle. The RAM-VB-191 is for 4x2 trucks only.

No-Drill Mount for 2014-19 Chevrolet Silverado This RAM No-Drill¢â€ž¢ mountingThe system uses existing hardware from the passenger side for quick and easy installation in a range of Chevrolet and GMC vehicles.
PRODUCT ID: 84171
SKU: NVN-84171
CSKU: CWR-84171
REWRITE: 95282-ram-mount-no-drill-mount-f-39-14-19-chevrolet- silverado
MPN: RAM-VB-193-SW2
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: RAM Mount No-Drill Mount f/'14-19 Chevrolet Silverado
EX_NAME: RAM MOUNT NO-DRILL MOUNT F/ '14-19 CHEVROLET SILVERADO
PTITLE: RAM Mount No- Drill support f/'14-19 Chevrolet Silverado
TYPE: RamMount Store | Vehicle Mounts
SUPPLIER: RAM Mounting Systems
ELECTRONICS> GPS ACCESSORIES> GPS MOUNTS

Gtags:

GSpecs:

RAM Mount No-Drill Mount for 2014-19 Chevrolet Silverado Product Description

No-Drill Mount for 2014-19 Chevrolet Silverado

This No-Drill RAM Mount™ installs Quickly and easily in a range of Chevrolet and GMC vehicles using existing passenger side seat rail hardware. This configuration offers a telescopic function ranging from 12" to 18". Dual swing arms provide 12 inches of articulation and reach to allow passengers and driver access to the mounted unit. The round ball base attached to the end of the swing arm supports a variety of tablet and laptop mounts, while RAM rubber ball and socket technology provides additional adjustability as well as isolation against shock and vibration.

Features:

RAM No-Drill™ base provides low profile mounting; the telescoping poleique allows height adjustments
The double articulated swing arm allows ideal placement of the device; compatible with a variety of tablet and laptop stands
Made of high-strength powder-coated steel and composite
Backed by a lifetime warranty
Plate Size: 2.5"
Ball/Socket Size: Size C (1.5")
Materials: Powder Coated Steel, Marine Grade Aluminum

Hole pattern:

AMP 4 holes: 1.181" x 1.496"
3 holes 120 degrees: 1.812" diameter

Additional information:

This base is best used in bucket seat vehicles with a console Complete center For 2014 and 2015 trucks with a 40/20/40 bench seat, RAM-VB-191 is also an option. To install this base, the plastic trim closest to the passenger door. may need to be cutor modified to accommodate the RAM No-Drill™ base once installed. If this cannot be done in your vehicle or you are not comfortable. with this, you should not buy this product. Note that the RAM-VB-191 will not work with the 4x4 lever on the vehicle's center hump. The RAM-VB-191 is for 4x2 trucks only.

Drill-fFree Bracket for '14-19 Chevrolet Silverado This RAM No-Drill™ mounting system uses existing side hardware passenger to be installed quickly and easily in a range of Chevrolet and GMC vehicles.

Frequently Asked Questions (FAQ) about RAM Mount No-Drill Bracket for Chevrolet Silverado 2014-19 Who are RAM mounting systems?
How to describe RAM Mount No-Drill Bracket for /' 14-19 Chevrolet Silverado?
Who is RAM Mounting Systems? RAM stands for Round-A-Mount and was started in 1995. Using the finest assembly material, durable composites,steel, stainless steel, rubber and aluminum, our mounting bases and complete kits are manufactured to perform above expectations and remain cost effective. . For your next editing application, choose wisely. Choose RAM.How to describe the No Drill RAM Bracket for Chevrolet Silverado 2014-19? No-drill bracket for 2014-19 Chevrolet Silverado. This RAM No-Drill mounting system exists. Passenger side mounting hardware for quick and easy installation in a range of Chevrolet and GMC vehicles.

Save $24 when you purchase the 2014-19 Chevrolet Silverado No-Drill RAM Bracket for only $375 from NVN Marine! Free same day delivery before 3 p.m. No-Drill RAM Bracket for '14-19 Chevrolet Silverado Videos No-Drill RAM Bracket for '14-19 Chevrolet Silverado Technical Specifications

Type:	Store Ram Mount \| Suppovehicle rts
Supplier:	RAM Mounting Systems
Weight:	24.25 lbs
User Guide:	Download PDF
Product installation:	Download PDF

RAM Mount No-Drill Mount f/'14-19 Chevrolet Silverado User ReviewsRAM Mount No-Drill Mount f/'14-19 Chevrolet Silverado Shipping and Returns

Shipping Weight:	24.25 lbs
Box Sizes:	1.00 (h) x 12.00 (w) x 18.00 (w)
Cubic feet :	216.0
Returnable:	Yes
USPS First Class:	Yes

For detailed shipping terms, please see our shipping policy and you can find our poreturn and refund policy here.