Phoenix Victron 12/250 Inverter - 120 V - VE.Direct NEMA 5-15R - Single Outlet - 200 W Electrical

Phoenix 12/250 Inverter - 120V - VE.Direct NEMA 5-15R - Single Outlet - 200W

Inverters allow users to power home equipment requiring 230V/120V AC - using 12V, 24V or 48V DC "leisure" or "automotive" batteries.

*This inverter has a NEMA 5-15R outlet.

E.Direct communication port

The VE.Direct port can be connected to:

A computer ( VE.Direct .Direct to USB interface cable required)
Smartphones, tablets, MacBooks and other Apple and Android devices
(VE.Direct Bluetooth smart dongle required)

Fully configurable:

Low battery voltage alarm triggering and reset levels
Reset levels Low battery voltage cut-off and restart
Dynamic cut-off: cut-off level depending on load
Output voltage 210 - 245 V
Frequency 50 Hz or 60 Hz
ECO on/off mode and ECO mode detection level

Monitoring:

Input and output voltage, % of load and alarms

Proven reliability

The full bridge and toroidal transformer topology has proven its reliability for many years.

The inverters are resistant to short circuits and protected against overheating, whether due to overload or high ambient temperature.

High starting power

Needed to start loads such as power converters for LED lamps , halogen lamps or power tools.

ECO mode

In ECO mode, the inverter goes into standby mode when the load drops below a predefined value (min load: 15W). Once in standby, the inverter will turn on for a short time (adjustable, default: every 2.5 seconds). If the load exceeds a preset level, the inverter will remain on.

Remote On/Off

A remote on/off switch can be connected to a bipolar connector, or between the plus of the battery and the left contact of the bipolar connector.

LED diagnostics

Please see the manual for a description.

To transfer the load to another AC source: the automatic transfer switch

For Victron low consumption inverters, they recommend the transfer switch Filax automatic. The Filax features a very short switching time (less than 20 milliseconds) so that computers and other electronic equipment continue to operate without interruption.

Inverter specifications:

Cont. Power at 25 degrees C: (1) 250 VA
Cont. Power at 25 degrees C/40 degrees C: 200/ 175W
Peak power: 400W
Output AC voltage/frequency (adjustable): 230VAC or 120VAC +/- 3% 50 Hz or 60 Hz +/- 0. 1%
Input voltage range: 9.2 - 17 / 18.4 - 34.0 / 36.8 - 62.0 V
DC Low Shut Down ( adjustable): 9.3 / 18.6 / 37.2V
Dynamic (depending on load) DC Low Shut Down (fully configurable): Dynamic shutdown, see https://www.victronenergy. com/live/ve.direct:phoenix-inverters-dynamic-cutoff
DC Low Restart and Alarm (adjustable): 10.9 / 21.8 / 43.6V
Detection of charged battery (adjustable): 14.0 / 28.0 / 56.0V
Max. Efficiency: 87/88/88%
No-load power: 4.2 / 5.2 / 7.9 W
Default zero-load power in ECO mode (range retry default: 2.5 s, adjustable): 0.8 / 1.3 / 2.5W
ECO mode Stop and start power setting: adjustable
Protection (2): a - f
Operating temperature range -40 to +65 degrees C (fan-assisted cooling)

Case specifications:

Material and color: aluminum chassis steel and plastic cover (blue Ral 5012)
Battery connection: screw terminals
Maximum cable cross section: 10 mm² / AWG8
AC sockets standard: 230 V: Schuko (CEE 7/4), IEC-320 (male plug included); UK (BS 1363), AU/NZ (AS/NZS 3112); 120V: Nema 5-15R, GFCI
Protection category: IP 21
Weight: 2.4kg / 5.3lbs
Dimensions (H x W x D, mm); (H x W x D, inches): 86 x 165 x 260; 3.4 x 6.5 x 10.2

Accessories:

Remote on/off: Yes
Automatic transfer switch: Filax

Standards:

Safety: EN-IEC 60335-1 / EN-IEC 62109-1 / UL 458 (3)
EMC: EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000- 6-3
ECE R10-4 automotive directive : 1) Non-linear load, crest factor 3:1; 2) Protection key: a) output short circuit b) overload c) battery voltage too high d) battery voltage too low e) temperature too high f) DC ripple too high

Please contact your dealer for any returns, repairs, or support issues related to this product.

PRODUCT ID: 103133
SKU: NVN-103133
CSKU: CWR-103133
REWRITE: 114244-victron-phoenix-inverter-12-250-120v
MPN: PIN122510500
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: VICTRON PHOENIX INVERTER 12/250 120V VE.DIRECT NEMA
NAME_EX:
PTITLE: Victron Phoenix Inverter 12 /250 - 120V - VE.Direct NEMA 5-15R - Single Outlet - 200W
TYPE: Electric | Inverters
SELLER: Victron Energy
HARDWARE> ELECTRICAL AND ELECTRICAL SUPPLIES> POWER INVERTERS

Google Title :

Gtags:

GSpecs:

Victron Phoenix Inverter 12/250 - 120 V - VE.Direct NEMA 5-15R - Single output - 200 W Product description

Phoenix Inverter 12/250 - 120 V - VE.Direct NEMA 5-15R - Output single - 200 W Inverters allow users to power home equipment - requiring 230 V/120 V AC - using "leisure" or "automotive" batteries rated at 12 V , 24 V or 48 V DC.

*This inverter has a NEMA 5-15R outlet.

E.Direct communication port

The VE.Direct port can be connected to:

A computer ( VE.Direct .Direct to USB interface cable required)
Smartphones, tablets, MacBooks and other Apple and Android devices
(VE.Direct Bluetooth smart dongle required)

Fully configurable:

Low battery voltage alarm triggering and reset levels
Reset levels voltage cut and restartlow battery power
Dynamic cut-off: cut-off level depending on load
Output voltage 210 - 245 V
Frequency 50 Hz or 60 Hz
ECO on/off mode andd ECO mode detection level

Monitoring:

Voltage d input and output, % load and alarms

Proven reliability

The full bridge and toroidal transformer topology has proven its reliability for many years.

Inverters are short circuits. circuit-proof and protected against overheating, whether due to overload or high ambient temperature.

High starting power

Needed to start loads such as power converters for LED lamps, halogen lamps or power tools.

ECO mode

In mode ECO, the inverter goes to sleep when the load drops below une predefined value (min load: 15W). Once in standby, the inverter will turn on for a short period (adjustable, default: every 2.5 seconds). If the load exceeds a preset level, the inverter will remain on.

Remote On/Off

A remote on/off switch can be connected to a bipolar connector, or between battery plus and the left contact of the bipolar connector.

LED diagnostics

Please see the manual for a description.

To transfer the load to another AC source: the automatic transfer switch

For Victron's low-power inverters, they recommend the Filax automatic transfer switch. The Filax features a very short switching time (less than 20 milliseconds) so that computers and other electronic equipment continue to operate without interruption.

Inverter specifications:

Cont. Power at 25 degrees C: (1) 250 VA
Cont. Power at 25 degrees C/40 degrees C: 200 / 175 W
Peak power: 400 W
Output AC voltage/frequency (adjustable): 230VAC or 120VAC +/- 3% 50 Hz or 60 Hz +/- 0.1%
Input voltage range: 9.2 - 17 / 18.4 - 34.0 / 36.8 - 62.0 V
DC Low Shut Down (adjustable): 9.3 / 18.6 / 37.2V
Dynamic (depending on load) DC Low Shut Down (fully configurable): Dynamic cutoff, see https://www.victronenergy.com/live/ve.direct:phoenix-inverters-dynamic-cutoff
DC Low Restart and alarm (adjustable): 10.9 / 21.8 / 43.6V
Charged battery detection (adjustable): 14.0 / 28.0 / 56.0V
Max. Efficiency: 87/88/88%
No-load power: 4.2 / 5.2 / 7.9 W
Default zero-load power in ECO mode (range retry default: 2.5 s, adjustable): 0.8 / 1.3 / 2.5W
ECO mode Power settingStop and start speed: adjustable
Protection (2): a - f
Operating temperature range -40 to +65 degrees C (fan assisted cooling)

Enclosure specifications:

Material and color: steel frame and plastic cover (Ral 5012 blue)
Battery connection: screw terminals
Maximum cable cross section: 10 mm² / AWG8
Standard AC sockets: 230 V: Schuko (CEE 7/4), IEC-320 (male plug included); UK (BS 1363), AU/NZ (AS/NZS 3112); 120V: Nema 5-15R, GFCI
Protection category: IP 21
Weight: 2.4kg / 5.3lbs
Dimensions (H x W x P, mm); (H x W x D, inches): 86 x 165 x 260; 3.4 x 6.5 x 10.2

Accessories:

Remote on/off: Yes
Automatic transfer Switch: Filax

Standards:

Safety: EN-IEC 60335-1 / EN -IEC 62109-1 / UL 458 (3)
EMC: EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
Automotive directive ECE R10-4: 1 ) Nonlinear load, crest factor 3:1; 2) Protection key: a) output short circuit b) overload c) battery voltage too high d) battery voltage too low e) temperature too high f) DC ripple too high

Please contact your dealer for any returns, repairs, or support issues related to this product.

Save $17 when you buy the Victron Phoenix Inverter 12/250 - 120V - VE.Direct NEMA 5-15R - Single Outlet - 200W for only $96 from NVN Marine! Same day dispatch before 3 p.m. Victron Phoenix12/250 Inverter - 120V - VE.Direct NEMA 5-15R - Single Socket - 200W Videos Victron Phoenix 12/250 Inverter - 120V - VE.Direct NEMA 5-15R - Single Socket - 200W Technical specifications

Type:	Electric \| Corrugatedurs
Supplier:	Victron Energy
GFCI:	No
User Guide:	Download the PDF
Product Manual:	Download PDF
Product brochure:	Download PDF
Product installation:	Download PDF

Victron Phoenix 12/250 Inverter - 120 V - VE.Direct NEMA 5-15R - Single Outlet - 200 W Reviews Victron Phoenix 12/250 Inverter - 120 V - VE.Direct NEMA 5-15R - Single Outlet - 200 W Shipping & Return

For detailed shipping policy, please check our shipping policy and you can find our returns and refund policy here.