Pre-cut NavPod SystemPod for Garmin GPSMAP 1042xsv/1022xsv/1022 and Space f/9.5″ Wide Guard Boat Outfitting

Pre-cut SystemPod for Garmin GPSMAP 1042xsv/1022xsv/1022 and space for 9.5″ wide protection

SystemPods allow you to mount a radar or plotter charts and instruments together at the bar. Navigation at your fingertips. "Where you need it…when you need it." SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and clearly see the fine details of the screen.

It is best to mount a SystemPod on a single-curvature AngleGuard.

Structural Rigidity – Gen3 enhancements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex when tightening and the greater theThe pressure on the joint is uniform. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potential significantly damaging effects on plastic.

Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Stainless steel nNickel Plated Chrome - We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide nickel-plated, tamper-proof stainless steel screws for added security combined with a bit of style!

Commitment to quality
We stand behind our commitment by offering a 10-year warranty on all new NavPods Gen3.

Garmin GPSMAP pre-cut SystemPod 1042xsv/1022xsv/1022 and 9.5' wide skid plate gap. SystemPods are used to install radar or chartplotter and instruments on the helmet. ...
PRODUCT ID: 76071
SKU: NVN-76071
CSKU: CWR-76071
REWRITE: 87182-navpod-systempod-pre-cut-f-garmin-gpsmap-1042xsv-1022xsv -1022
MPN: GP1040-32
UPC: 659988113709
ASIN: B07Q1KCL1W
WSKU: NAVGP104033
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod SystemPod precut f/Garmin GPSMAP 1042xsv/1022xsv/1022 and Space f/9.5″ Wide Guard
NAME_EX: NAVPOD SYSTEMPOD PRECUT 1042XSV 9.5" PEDESTAL GUARD
PTITLE: NavPod SystemPod precut for Garmin GPSMAP 1042xsv /1022xsv/1022 and Space f/9.5" Wide Guard
TYPE: Boat Equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

NavPod SystemPod pre-cut for Garmin GPSMAP 1042xsv/1022xsv/1022 and space for 9.5â‚¬²â‚¬² Wide Guard - GP1040-32

Gtags:

GSpecs:

NavPod SystemPod pre-cut for Garmin GPSMAP 1042xsv/1022xsv/1022 and Space f/9.5" Wide Guard Product description

SystemPod pre-cut for Garmin GPSMAP 1042xsv/1022xsv/1022 and space for 9.5" large Guard

SystemPods allow you to mount a radar or chart plotter and instruments together at the helm. Navigation at your fingertips. "Where you need it…when you need it." SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and clearly see the fine details of the screen.

It is best to mount a SystemPod on a single-curvature AngleGuard.

Structural Rigidity – Gen3 enhancements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allows for greatere waterproofing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repairrere your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. The large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-resistant, nickel-chrome-plated stainless steel screws for added security and a bit of style!

Commitment to quality
We stand behind our commitment by offering a 10-year warranty years on all new Gen3s. NavPods.

Garmin GPSMAP pre-cut SystemPod 1042xsv/1022xsv/1022 and 9.5' wide skid plate space. SystemPods are used to install radar or chartplotter and instruments on the helmet. ...

Frequently asked questions (FAQ) aboutu NavPod SystemPod Pre-Cut f/Garmin GPSMAP 1042xsv/1022xsv/1022 & Space f/9.5″ Wide Guard Who is the NavPod?
How to describe the NavPod SystemPod Pre-Cut f/Garmin GPSMAP 1042xsv/1022xsv/ 1022 & Space f/9.5″ Wide Guard?
Is it cut or uncut?
How to mount or what is the mounting style of the NavPod SystemPod Pre-Cut f/Garmin GPSMAP 1042xsv/1022xsv/ 1022 & Space f/9.5″ Wide Guard?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod SystemPod Pre-Cut f/Garmin GPSMAP 1042xsv/1022xsv/1022 & Space f/9.5″ Wide Guard? THEGarmin GPSMAP pre-cut SystemPod 1042xsv/1022xsv/1022 and 9.5' wide skid plate space SystemPods are used to install radar or chart plotter and instruments on the helmet. ...Is it cut or not? Cut How to mount or what is the mounting style of the NavPod SystemPod Pre-Cut f/Garmin GPSMAP 1042xsv/1022xsv/1022 & Space f/9.5″ Wide Guard? Pedestal

Save $108 when you purchase the NavPod SystemPod Pre-Cut f/Garmin GPSMAP 1042xsv/1022xsv/1022 & Space f/9.5″ Wide Guard for only $351 from NVN Marine! Same day dispatch before 3 p.m. NavPod SystemPod Pre-Cut f/Garmin GPSMAP 1042xsv/1022xsv/1022 & Space f/9.5″ Wide Guard Technical Specifications

Type:	Boat Outfitter \| Display Media
Supplier:	NavPod
Weight:	5.55 lbs
Cut/Uncut :	Coupe
Mounting style:	Pedestal

NavPod SystemPod pre-cut for Garmin GPSMAP 1042xsv/1022xsv/1022 and Space f/9.5″ Wide Guard

Weight shipping:	5.55 lbs
Box sizes:	7, 00 (h) x 10.00 (w) x 21.00 (w)
Cubic feet:	1470.0
Returnable:	Yes