ProMariner ProSafe FAILSAFE 60 Amp Galvanic Isolator Electrical

FailSafe technology with reliability and peace of mind. The ProSafe FS series of 30 and 60 amp FailSafe galvanic isolators will interrupt the flow of galvanic current to other boats in a marina when installed on a boat connected to shore power. This technology maintains AC safety and addresses the most common forms of corrosion and premature zinc loss within the boat bonding system. The ProSafe FS Series is UL certified to meet the parameters of ABYC Recommendation A-28. ProSafe FS installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required for non-FailSafe certified galvanic isolators. The ProSafe 30 and 60 A models are built on robust Flat Pack semiconductor platforms, ensuring that in the event of a failure, the failure is safe by not compromising the continuity of terre on board when connected to AC shore power.

Pro Mariner 22074 Attributes Pro Mariner 22074 Features and Benefits

High power semiconductors in flat pack: robust, high-power diodes allow the FS series to meet the new FailSafe criteria
Innovative design: the FS60 will automatically cool if it needs to carry power Cooler operation in this mode
Protected Ignition: Meets ISO 8846 and each model can be mounted in an engine compartment
Gold Plated Terminations: Simply install into the built-in green safety ground wire
Use the ProSafe FS30 for 30 amp shore cord applications
5 year limited warranty

Pro Mariner 22074 Installation Instructions

22034_USE_FailSafe.pdf
22034_USE.pdf

Pro Mariner Technical Bulletins 22074

22043_SS.pdf

ProSafe FAILSAFE 60 A galvanic isolator

ProSafe FS installs easily and does not require a dedicated monitor to check the operational status of the galvanic isolator as required FailSafe.ors non-certified galvanic isolator.

ABYC A-July 28, 2008 Fail Safe compliant and certifiedCertified by Underwriters Laboratories (UL). Ensures the shore power safety ground wire is held through the insulator.
High-power flat-pack semiconductorsRobust high-power diodes enable the FS series to meet the new FailSafe criteria for driving inrush currents of 3 000 amps for the required duration periode.
Protected against ignitionComplies with ISO 8846 and can be mounted in an engine compartment.
Gold plated terminations

This product may expose you to chemicals, including di(2-ethylhexyl) phthalate (dehp), known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,

FailSafe technology with reliability and peace of mind. The ProSafe FS series of 30 and 60 amp FailSafe galvanic isolators will interrupt the flow of galvanic current to other boats in a marina when installed on a boat connected to shore power. This technology maintains AC safety and addresses the most common forms of corrosion and premature zinc loss within the boat bonding system. The ProSafe FS Series is UL certified to meet the parameters of ABYC Recommendation A-28. ProSafe FS installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required for non-FailSafe certified galvanic isolators. The ProSafe 30 and 60 A models are built on robust Flat Pack semiconductor platforms, ensuring thatIn the event of a fault, the fault is safe by not compromising onboard earth continuity when connected to AC shore power.

Pro Mariner 22074 Attributes Pro Mariner 22074 Features and Benefits

High-power flat-pack semiconductors: Robust high-power diodes enable the FS Series to meet new FailSafe criteria
Innovative design: the FS60 will automatically cool if it is required to perform current-assuring cooling operation in this mode
Ignition protected: complies with ISO 8846 and either other model can be mounted in an engine compartment
li>
Gold plated terminations: simply install into the built-in green safety ground wire
Use the ProSafe FS30 for applications of 30 amp shore cord
5 year limited warranty

Pro Mariner 22074 Installation Instructions

22034_USE_FailSafe.pdf
22034_USE.pdf

Pro Mariner Technical Bulletins 22074

22043_SS. pdf

ProSafe FAILSAFE 60 Amp Galvanic Isolator

ProSafe FS installs easily and does not require a dedicated monitor to check the status of operation of the galvanic isolator as required by non-FailSafe certified galvanic isolators.

ABYC A-July 28, 2008 Fail Safe compliant and certifiedCertified by Underwriters Laboratories (UL). Ensures the shore power safety ground wire is held through the insulator.
High-power flat-pack semiconductorsRobust high-power diodes enableFS series to meet the new FailSafe criteria to carry inrush currents of 3,000 amps for the required duration period.
Protected against ignitionComplies with ISO 8846 and can be mounted in an engine compartment.
Gold plated terminations

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly with any problems or concerns.

Promariner ProSafe 50/60 Amp Fail-Safe Electrical Isolator - easy to install, no special monitors required Non-FailSafe Certified Galvanic Isolator nis required to check the operational status of the galvanic isolator. The ProSafe FS 60 is built on the rugged FlatPack semiconductor platform and, by not compromising grounding continuity on the board when connected to AC Shore power, it ensures the safety of the default in the event of a fault.

ProMariner ProSafe FAILSAFE 60amp Galvanic Isolator Related ProductsSeaguard Marine Standard Digital Corrosion Tester with Zinc Reference Cell (ZRE)
Seaguard Marine Professional Digital Corrosion Tester with Silver and Silver Chloride Reference Cell (SSC)

Frequently Asked Questions (FAQ) About the ProMariner ProSafe FAILSAFE 60 Amp Galvanic Isolator Who is the ProMariner?
How to Describe the ProMariner Galvanic Isolator ProSafe FAILSAFE 60 amps?
How heavy is the product?
What is the size?
Who is the ProMariner? Professional Mariner was foundedover 40 years ago with a single principle: to make boating more enjoyable! We pioneered a robust line of fully automatic onboard marine battery chargers that have provided the maritime industry with a common method of charging batteries in a short time without the need to store or transport portable battery chargers on board. We haven't looked back since.

Today, ProMariner is the industry leader in marine and mobile battery charging. We offer a full range of waterproof and dry-mount chargers for all battery chemistries, as well as technically advanced power conversion modules. All of our products are designed to extend the life of your batteries and keep you on the water longer! How to describe the ProMariner ProSafe FAILSAFE 60 Amp Galvanic Isolator? Safe electrical insulatorPromariner ProSafe 50/60 A built-in unit - easy to install, no special monitor required by a non-FailSafe certified galvanic isolator is required to check the operational status of the galvanic isolator. The ProSafe FS 60 is built on the rugged FlatPack semiconductor platform and, by not compromising grounding continuity on the board when connected to AC Shore power, it ensures the safety of the fault in case of fault.

ProSafe Galvanic Isolator FAILSAFE 60 A
ProSafe FS is easily installed and does not require a dedicated monitor to check the operational status of the galvanic isolator as required by non-FailSafe certified galvanic isolators.
ProSafe FS 60 is built to last, with a high-quality galvanized steel housing that resists corrosion and rust

The ProSafe FAILSAFE 60 amp galvanic isolator is designed to install in minutess and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required for non-FailSafe certified galvanic isolators.
ProSafe FS 60 is built with the same rugged construction and same reliability. like other Fail Safe products from ProSafe, but without the need for a dedicated monitor.

How heavy is the product? 3.7

ProSafe FAILSAFE 60 Amp Galvanic Isolator
ProSafe FS installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required by non-FailSafe certified galvanic isolators.
ProSafe FS 60 is built to last, with a high-quality galvanized steel housing that resists corrosion and rust
The galvanic isolator ProSafe FAILSAFE 60 A is designed to be installed in minutes and does not require dedicated installation. monitor to check the operating statusoning of the galvanic isolator as required by non-FailSafe Certified Galvanic Isolators.
ProSafe FS 60 is built with the same rugged construction and reliability as ProSafe's other Fail Safe products, but without the need for 'a dedicated monitor.
ProSafe FAILSAFE 60amp Galvanic Isolator, an industry leading product from ProSafe.
ProSafe FS installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required by non-FailSafe certified galvanic isolators.
ProSafe FS 60 is built to last and features a sleek design that fits into any environment .

How big is it? 7.25" L x 6.5" W x 3.75" H

Save $287 when you purchase the ProMariner ProSafe FAILSAFE 60 Amp Galvanic Isolator for only $308 from NVN Marine! Same day shipping before 3:00 p.m. Tech Specs!ics of the ProMariner ProSafe FAILSAFE 60 Amp Galvanic Isolator

Type:	Electric.al \| Battery Isolators
Supplier:	ProMariner
Weight:	4.6 lbs
Product Manual:	Download PDF

ProMariner ProSafe FAILSAFE 60amp Galvanic Isolator User ReviewsProMariner ProSafe FAILSAFE 60amp Galvanic Isolator Shipping and Returns

Shipping Weight:	4.6 lbs
Box Sizes:	4.00 (h) x 8.00 (w) x 13.00 (l)
Cubic feet:	416.0
P65:	Yes

For detailed shipping terms, please see our shipping policy and you can find our return and refund policy herei.