PSS PRO shaft seal 1-1/4" shaft and 2" tube Marine Hardware

PRO shaft seal for 1-1/4" shaft and 2" tube

The PSS PRO shaft seal is a mechanical seal using our components proven seals in stainless steel and carbon. , but adds a reinforced silicone boot, we include external rings standard on +2-1/4" sizes and optional on all smaller sizes, secondary shaft retention collar, steel hose clamps 316 stainless steel (rolled, non-perforated edges) and an optional Nitronic 50 rotor upgrade (for highly corrosive environments) Designed specifically for applications that will require increased durability and resistance to harsh, corrosive, high pressure and environments. otherwise demanding. The PSS PRO shaft seal is a specialized mechanical seal that is suitable for a variety of applications, with unrivaled performance.

Like PSS Type A and B seals, the D seal The PRO shaft is an easy jointal mechanics. The sealing surface is created between the flat surfaces of the rotating stainless steel rotor. and the carbon stationary bridle.The carbon stationary bridle is attached to a heavy-duty silicone bellows which is secured to the vessel's stern tube (shaft log), with 316SS hose clamps. The stainless steel rotor is mounted on the shaft in front of the carbon flange and is used to compress the bellows, the rotor is then attached to the shaft with set screws and the shaft retention collar is installed. This compression (preload) maintains constant contact between the two contact faces of the stainless steel rotor and the carbon flange, allowing the PSS to compensate for the variable axial movement due to propeller thrust. The carbon flange is overbored relative to the shaft diameter, which allows it to "float" around the shaft and thus compensate for most misalignments and vibrations in the transmission. The rotor hasStainless steel is sealed to the shaft by two O-rings recessed into the rotor bore. These O-rings rotate with the stainless steel shaft and rotor and therefore do not suffer wear during operation.

Specifications:

Temperature Limits: -13°F to 425°F (-25°C to 220°C)
Pressure Limits: 40 PSI (2.75 BAR)
Shaft RPM Limits: 10,000 RPM
Carbon Graphite: Lapped to 4 HLB (0.000044" Tolerance)
316SS / Nitronic 50: Face to 9 Ra
Bellows Material: Molded Formed Silicone/Fabric

Product Dimensions:

Shank Dia. (A) 1-1/4"
Stern tube diameter. (B) 2" to 2-1/8"
Uncompressed length (C) 8.805"
Compressed length approximately 8.055"
Rotor diameter (D) 2.875"
Rear cuff length (E) 1.3"

PYI PSS PRO shaft seal adopts steel seal componentser mature stainless and carbon, but adds reinforced silicone bellows, auxiliary shaft retaining ring, 316SS hose...
PRODUCT ID: 86659
SKU: NVN-86659
CSKU: CWR-86659
REWRITE: 97770-pss-pro-shaft-joint- Shaft 1-1-4
MPN: 03-114-200
UPC: 015568069680
ASIN: B09BBMB3WV
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: PSS PRO Shaft Seal 1-1/4" Shaft & 2" Tube
NAME_EX: JOINT D 'PSS PRO SHAFT 1 1/4" SHAFT AND 2" TUBE
TITLE: PSS PRO Shaft Seal 1-1/4" Shaft and 2" Tube
TYPE: Marine Hardware | Shaft Seals
SELLER: PSS Shaft Seal
SPORTING GOODS> OUTDOOR RECREATION> BOATING & WATER SPORTS PSS Pro Shaft Seal 1- 1/4" Shaft and 2" Tube

Gtags:

GSpecs:

PSS PRO shaft seal for 1-1/4" shaft and 2" tube Product description

PRO shaft seal for 1-1/4" shaft and 2" tube

The PSS PRO Shaft Seal is a mechanical seal using our proven stainless steel and carbon sealing components, but adds a reinforced silicone bellows, we include standard outer rings on sizes + 2-1/4" and optional on all smaller sizes, a secondary shaft retention collar, 316 stainless steel hose clamps (rolled, non-drilled edges) and optional Nitronic 50 rotor upgrade ( for highly corrosive environments).Designed specifically for applications that will require increased durability and resistance to harsh, corrosive, high pressure and otherwise demanding conditions. The PSS PRO shaft seal is a specialized mechanical seal suitable for a variety of applications. applications, with unrivaled performance.

Like the seals of aType A and B PSS shaft, the PRO shaft seal is a mechanical face seal. The sealing surface is created between the flanges.t surfaces of the rotating stainless steel rotor and the fixed carbon flange. The fixed carbon bridle is attached to a heavy duty silicone bellows which is secured to the vessel's stern tube (shaft log), with 316SS hose clamps. The stainless steel rotor is mounted on the shaft in front of the carbon flange and is used to compress the bellows, the rotor is then attached to the shaft with set screws and the shaft retention collar is installed. This compression (preload) maintains constant contact between the two contact faces of the stainless steel rotor and the carbon flange, allowing the PSS to compensate for the variable axial movement due to propeller thrust. The carbon flange is overbored relative to the diameter of the shaft, which allows it to "float" around the shaft and thus compensate for mosttransmission misalignments and vibrations. The stainless steel rotor is sealed to the shaft by two O-rings recessed into the rotor bore. These O-rings rotate with the stainless steel shaft and rotor, and therefore do not suffer wear during operation.

Specifications:

Temperature Limits: -13°F to 425°F (-25°C to 220°C)
Pressure Limits: 40 PSI (2.75 BAR)
Shaft speed limits: 10,000 rpm
Carbon graphite: Lapped to 4 HLB (0.000044" tolerance)
316SS / Nitronic 50: face at 9 Ra
Bellows Material: Molded Formed Silicone/Fabric

Product Dimensions:

Shaft diameter (A) 1-1/4"
Stern tube diameter. (B) 2" to 2-1/8"
Uncompressed length (C) 8.805"
Compressed length approximately 8.055"
Rotor diameter ( D ) 2.875"
Rear cuff length (E) 1.3"

PYI PSS PRO shaft seal adopts mature stainless steel and carbon seal components, but adds reinforced silicone bellows, auxiliary shaft fixing ring, 316SS pipe...

Frequently Asked Questions (FAQ) About PSS PRO Shaft Seal 1-1/4" Shaft and 2" Tube Who IWhat is PSS Shaft Seal?
How Describe the PSS PRO Shaft Seal 1-1/4" and 2" Tube?
Who is the PSS Shaft Seal? The PSS Shaft Seal is the world's best-selling marine mechanical seal and is installed as standard equipment by many of the world's leading shipyards and boat builders. The PSS Shaft Seal is also recognized as the leading retrofit (aftermarket) seal in the global market. How to describe the PSS PRO shaft seal for 1-1/4" shaft and 2" tube? PYI PSS PRO shaft seal adopts mature stainless steel and carbon seal components, but adds a soreinforced silicone bellows, auxiliary shaft retaining ring, 316SS hose...

Save $98 when purchasing the Shaft Seal PSS PRO for 1-1/4" Shaft and 2" Tubefor only $392 from NVN Marine! Free same day delivery before 3 p.m. PSS PRO Shaft Seal 1-1/4" Shaft and 2" Tube Videos PSS PRO Shaft Seal 1-1/4" Shaft and 2" Tube Technical Specificationscifications

Type :	Marine equipment \| Shaft Seals
Supplier:	PSS Shaft Seal
Weight:	4.0 lbs

PSS PRO 1 shaft seal -1/4" and 2" Tube User Reviews PSS PRO Shaft Seal 1-1/4" Shaft and 2" Tube Shipping & Returns

Shipping Weight :	4.0 lbs
Box sizes:	6.00 (h) x 7.00 (w) x 11.00 (l)
Cubic feet:	462.0
Returnable:	Yes