R&D flexible shaft coupling f/5" B/W Hurth - Capacity 8HP/100RPM Marine Hardware

Flexible Shaft Coupling for 5" B/W, Hurth - Capacity 8HP/100RPM

R&D flexible couplings are made from a profiled flexible disc molded in a new type of polyurethane that is both strong and resilient. The profiled disc provides clearance for bolt heads and is able to flex freely to compensate for any temporary misalignment of the motor and shaft, due to flexing of the boat structure or. when the motor moves on its rubber vibration isolation supports, the compression on the disc between the two coupling halves and the reverse thrust are taken up in compression on the disc between the two breakage straps. If the disc fails, the steel straps ensure the safety of the coupling and guarantee that the drive is maintained in forward and reverse directions.

To calculate the coupling power. required:
Engine horsepower _{x Reduction ratio x 100 = HP/100RPM}
Engine speed

Example:
Ford 150 hp at 2500 rpm with Borg Warner Velvet DRive 72C Reduction ratio 2:1
Engine power is 150 HP, maximum rated speed is 2500, reduction ratio is 2:1
150/2500 x2 shaft coupling. It is designed to protect a boat's transmission. The unit will reduce vibration, compensate for some misalignments, isolate the shaft and absorb shock loads.

The flex disc is machined from a resilient and durable polyurethane. It allows the unit to flex, absorbing vibration and temporary misalignment of the shaft and motor due to motor movement or flexing of the vessel structure.

The polyurethane disc is supportedu by two metal compression straps, one on each side of the flexible coupling. These metal straps keep the system in constant compression whether the transmission is in forward or reverse. This feature significantly extends the life of the system.

The R&D MarineThe flexible coupling will also absorb shock loads resulting from gear changes or the propeller hitting a submerged object. The polyurethane disc deforms under light shock loads and is designed to be sacrificial under heavy shock loads, saving costly transmission repairs. If the disc is destroyed due to a massive shock load, the metal compression straps keep the coupling intact, ensuring that the drive system is functional in both forward and reverse directions.

Why R&D Marine Flexible Shaft Couplings?

Polyurethane flange creates a flexible barrier to reduce transmission noise and vibration to quiet your drivetrain
Absorbs transmission shock caused by propeller and high speed changes speed. This helps reduce and avoid costly damage to the drivetrain
Fail-safe design, forward and reverse thrusts are taken in compression by the steel straps, resulting in a durable design even in extreme conditions

R&D Marine has developed a variety of reasonably priced flexible fittings to suit all major installations. The developed flexible coupling can reduce motor noise and vibration. -f-5
MPN: 910-044
UPC: 839662004114
ASIN: B00TFTZMDC
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: R&D Flexible Shaft Coupling f/5" B/W, Hurth - Capacity 8HP/100RPM
NAME_EX : R&D FLEXIBLE COUPLING FOR 5" B/W, HURTH - 8 HP /100 RPM
PTITLE: R&D Flexible Shaft Coupling f/5" B/W, Hurth - Capacity 8HP/100RPM
TYPE: Marine Hardware | Shaft Couplers
SELLER: R&D Marine
SPORTING GOODS> OUTDOOR LEISURE> BOATING AND WATER SPORTS R&D FlexibleCoupling shaft f/5 B/W, Hurth - Capacity 8HP/100RPM

Gtags:

GSpecs:

R&D Flexible Shaft Coupling f/5" B/W, Hurth - Capacity 8HP/100RPM Product Description Flexible Shaft Coupling for 5" B/W, Hurth - Capacity 8HP/100RPM

R&D flexible couplings are made from a profiled flexible disc molded in a new type of strong but resilient polyurethane. The profiled disc provides space for bolt heads and is capable of flexing freely to compensate for any temporary misalignment of the motor and shaft, due to flexing of the boat structure or movement of the motor on its insulation mounts rubber vibrations. The forward thrust is taken in compression on the disc between the two half-couplings and the reverse thrust is taken in compression on the disc between the two breaking straps. In the unlikely event of disc failure, the steel straps keep the coupling secure and ensure the drive stays in both forward and reverse directions.reverse.

To calculate the required coupling power:
Engine power _{x Reduction ratio x 100 = HP/ 100RPM}
Engine speed

Example:
Ford 150 hp at 2500 rpm with Borg Warner Velvet Drive 72C 2:1 reduction ratio
Engine power is 150 hp, maximum Rated speed is 2500, reduction ratio is 2:1
150/2500 X 2 x 100 = 12 hp per 100 rpm
br>The required coupling is 910-009

The R&D marine flexible coupling fits between the transmission output flange and shaft coupling. It is designed to protect a boat's transmission. The unit will reduce vibration, compensate for some misalignments, isolate the shaft and absorb shock loads.

The flex disc is machined from a resilient and durable polyurethane. It allows the unit to flex, absorbing vibration and temporary misalignment of the shaft and motor due toengine movement or flexing of the vessel structure.

The polyurethane disc is supported by two metal compression straps, one on each side of the flexible coupling. These metal straps keep the system in constant compression, whether the transmission is forward or backward. This feature significantly extends the life of the system.

The R&D Marine Flexible Coupling will also absorb shock loads resulting from gear changes or the propeller striking a submerged object. The polyurethane disc deforms under light shock loads and is designed to be sacrificial under heavy shock loads, saving costly transmission repairs. If the disc is destroyed due to a massive shock load, the metal compression straps keep the coupling intact, ensuring that the drive system is functional in forward motion asin reverse.

Why R&D Marine Flexible Shaft Couplings?

Polyurethane flange creates a flexible barrier to reduce noise and vibration of the transmission to calm your transmission
Absorbs transmission shock caused by propeller and high-speed gear changes. This helps reduce and avoid costly damage to the drivetrain
Fail-safe design, forward and reverse thrust is taken in compression from the steel straps, providing a durable design even in extreme conditions

R&D Marine has developed a variety of reasonably priced flexible couplings to fit all major installations. The developed flexible coupling can reduce motor noise and vibration...

Frequently Asked Questions (FAQ) about R&D f/5" B/W Flexible Shaft Coupling, Hurth - Capacity 8HP/100RPM Who is the R& D Marine?
How to describe the R&D f/5" B/W, Hurth Flexible Shaft Coupling - 8HP/100RPM Capacity?
Who is R&D Marine? It has always been considered essential that all products are easy to use, safe and above all available at the right price R & D Marine is proud to be able to supply or assemble from stock most products to cover urgent breakdowns. to product suitability and customer recommendations, it has been possible to develop the global distribution network that R&D Marine has today How to describe the R&D f/5" B flexible shaft coupling. /W, Hurth - Capacity 8HP/100RPM? R&D Marine has developed a variety of reasonably priced flexible couplings to fit all major installations. The developed flexible coupling can reduce motor noise and vibration...

Save $101 when purchasing R&D Flexible Shaft Couplingf/5" B/W, Hurth - 8 HP/100 RPM Capacityfor only $404 from NVN Marine! Same day shipping before 3pm. Flexible Shaft Coupling R&D f/5" B/W, Hurth - Capacity 8HP/100RPM Technical specifications

Type:	Marine equipment \| Shaft Couplers
Supplier:	Marine R&D
Weight:	3.75 lbs
User Guide:	Download PDF
Product brochure:	Download PDF

R&D Flexible Shaft Coupling f/5" B/W, Hurth - Capacity 8HP/100RPM User ReviewsR&D Flexible Shaft Coupling f/5" B/W, Hurth - Capacity 8HP/100RPM Shipping & Returns

Shipping Weight:	3.75 lbs
Box sizes:	4.00 (h) x 8.00 (w) x 8.00 (w)
Cubic feet:	256.0
Returnable:	Yes

For detailed shipping terms, please see our Shipping Policy and you can find our returns and refunds policy here.