R&D motor mount with 4" footprint - 5/8" stud - 120 to 410 lb capacity per mount Marine Hardware

Engine mount with 4" footprint - 5/8" stud - 120 to 410 lb capacity per mount

R&D marine engine mounts are designed specifically for the rigors of marine applications . The mounts are rigid enough to absorb thrust from the fore and aft propeller, but soft enough to isolate transmission vibrations from the hull.

To help increase the longevity of the mounts, all parts in steel are zinc plated and pasivated to limit corrosion. . The rubber component is coated with an oil shield to protect it from petroleum-based products.

R&D Marine mounts are preloaded based on the combined weight of the engine and transmission to limit movement of the engine. For ease of installation, the brackets are height adjustable and the mounting holes in the base of the bracket are slotted to aid transmission alignment.

How to select (detailsrequired):
1.Define the total weight of the engine and transmission.
2.Determine 60% of the total weight then divide by 2 to determine the capacity of each of the rear supports (the supports transmission side of the engine).
3.Determine 40% of the total weight then divide by 2 to determine the capacity of each of the front supports. brackets (the brackets opposite the transmission side of the engine).
4.Determine the necessary stud diameter and bracket footprint.
5.Choose the most appropriate size bracket for the weight per bracket. When possible, choose the bracket closest to the middle of the weight range.

Example:
The weight of the motor is 480 lbs, the weight of the transmission is 110 lbs, footprint is 4", stud diameter is 5/8".
Total weight is 590 lbs.
590 x 0.6/2 = 177 lbs by rear support. Required brackets are 800-010
590 x 0.4/2 = 118 lbs per rear bracket. The supports requis are 800-037

Why R&D Marine Engine Mounts?

Designed for marine use, accepts thrust from propeller and motor in both directions
Offers a fail-safe design
Are R&D marine mounts Height adjustable
Preloaded to reduce movement
Olonged holes in the base for easy alignment
Mounting types suitable for all applications

Engine support with 4 studs "5/8 footprint", 120-410 Lb (800-011) from R&D Marine. What could be more interesting and more meaningful than sailing in open water? This is a good solution...
PRODUCT ID: 54883
SKU: NVN-54883
CSKU: CWR-54883
REWRITE: 65994-r-d-engine-mount-w-4-footprint
MPN: 800-011
UPC: 839662003438
ASIN: B00TFTWPT6
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: R&D Engine Mount with 4" Footprint - Studof 5/8" - Capacity of 120 to 410 lbs per bracket
NOM_EX: R&D MOTOR BRACKET WITH 4" OVERHEAD 5/8 STUD, 120-410 LB
PTITLE: R&D MOTOR BRACKET with 4" OVERHEAD " - 5/8" Stud - 120 to 410 lb Capacity per Bracket
TYPE: Marine Hardware | Engine Quantities
SUPPLIER: R&D Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> PARTS WATERCRAFT AND ACCESSORIES> WATERCRAFT ENGINE PARTS R&D Engine Mount with 4 Footprint - 5/8 Stud - 120 to 410 lb. Capacity per Bracket

Gtags:

GSpecs:

R&D Motor Mount with 4" Footprint - 5/8" Stud - 120 to 410 lb. Capacity per Bracket Product DescriptionMotor Mount with 4" Footprint - 5/8" Stud - 120 to 410 lb. Capacity per Bracket lbs per mount

R&D marine engine mounts are designed specifically for the rigors of marine applications. The mounts are rigid enough to absorb thrust from the fore and aft propeller, but soft enough to isolate transmission vibrations from the hull.

To help increase the longevity of the mounts, all parts in steel are zinc plated and pasivated to limit corrosion. . The rubber component is coated with an oil shield to protect it from petroleum-based products.

R&D Marine mounts are preloaded based on the combined weight of the engine and transmission to limit movement of the engine. For ease of installation, the brackets are height adjustable and the mounting holes dn the base of the bracket are slotted to facilitate alignment of the transmission.

How to select (details required):
1.Define the total weight of the engine and the transmission.
2.Determine 60% of the total weight then divide by 2 to determine the capacity of each of the rear mounts (the mounts on the transmission side of the engine).
3.Determine 40% of the total weight then divide by 2 to determine the capacity of each of the front brackets (the brackets opposite the transmission side of the engine).
4.Determine the stud diameter needed. and the footprint of the support.
5. Choose the most appropriate size bracket for the weight per bracket. When possible, choose the bracket closest to the middle of the weight range.

Example:
The weight of the motor is 480 lbs, the weight of the transmission is 110 lbs, footprint is 4", stud diameter is 5/8".
Total weight is 590 lbs.
590 x 0.6/2 =177 lbs per rear support. Required brackets are 800-010
590 x 0.4/2 = 118 lbs per rear bracket. Required brackets are 800-037

Why R&D Marine Engine Mounts?

Designed for marine use, accepts shovel and engine thrust in both directions
Offers a fail-safe design
R&D marine mounts are height adjustable
Preloaded to reduce movements
Oblong holes in the base for easy alignment
Mounting types suitable for all applications

Engine support with 4 "5/8 footprint" studs, 120-410 Lb (800-011) from R&D Marine. What could be more interesting and more meaningful than sailing in open water? It's a good solution...

Frequently asked questions (FAQ) about the R&D motor mount with 4" footprint - 5/8" stud - 120 to 410 lb capacity per mount Qui is Marine R&D?
How to describe theR&D engine mount with 4" footprint - 5/8" stud - 120 to 410 lb capacity per mount?
Who is R&D Marine? It has always been considered essential that all products are easy to use, safe and above all available at the right price. R & D Marine is proud to be able to supply or assemble from stock most products to cover urgent breakdowns. Thanks to the service provided, the suitability of the products and customer recommendations, it has been possible to develop the global distribution network that R & D Marine has today. How to describe the R&D Motor Mount with 4" Footprint - 5 /8" Stud - 120 to 410 lb Capacity per Bracket? Engine mount with 4" 5/8" studs, 120-410 Lb (800-011) from R&D Marine. What could be more interesting and more meaningful than sailing in open water? It's a good solution...

Save $34 on the purchase of the R&D motor mount with 4" footprint - Stud5/8" - 120 - 410 lb capacity per bracket for only $136 from NVN Marine! Same day shipping before 3 p.m. R&D engine mount with 4" footprint - Stud 5/8" - 120 to 410 lb capacity per mount Technical Specifications

Type:	Marine Hardware \| Engine Mounts
Supplier:	Marine R&D
Weight:	2.4 lbs
User Guide:	Download PDF
Product brochure:	Download PDF

R & D motor mount with 4" footprint - 5/8" stud - 120 to 410 lb capacity per bracket User reviews R & D motor mount with 4" footprint - 5/8" stud - 120 capacity at 410 lbs per carrier Shipping & Returns

Shipping Weight:	2.4 lbs
Box sizes:	4.00 (h) x 6.00 (w) x 6.00 (w)
Cubic feet:	144.0
Returnable:	Yes