Raymarine ITC-5 Analog to Digital Transducer Converter - Seatalkng Marine Navigation & Instruments

iTC-5 Instrument Transducer Converter

iTC-5 Instrument Transducer Converter

The iTC5 Instrument Transducer Converter allows the use of common analog transducer signals with new digital instrument displays like Raymarine's i70 and ST70 Plus. The ultra-compact iTC5 has connections to house the five most common analog transducers; depth, speed/temperature, wind, compass and rudder. The iTC5 instantly converts these 5 analog signals to the SeaTalk^ng digital protocol.

In addition to providing analog-to-digital conversion, the iTC5 provides all power and connection connections. communication required for the transducers. This greatly simplifies the installation of new systems and is also a simple and cost-effective way for owners of older analog instrument displays to upgrade to the latest instrumentation technology.digital display. The iTC5 eliminates the need for expensive "smart" transducers or individual instrument modules. Full control for calibration and alarms are performed via i70 or ST70 Plus instruments.

The iTC5 connects to Raymarine's SeaTalk^ng network and works with most analog transducers old Raymarine ST30, ST40, ST50, ST60, ST80. and ST290 series instruments. Additionally, the iTC5 works with Raymarine Fluxgate compass modules as well as rotary and linear rudder feedback transducers to support heading and rudder angle instruments.

Features:

All-in-one analog-to-digital converter for depth, speed/temperature, wind, compass and rudder transducers
Transmits SeaTalk^ng and NMEA2000 data to digital instruments, MFDs and more
AllowsEasy upgrade of older analog instrument displays without replacing transducers
SeaTalk^ng network provides all necessary power and data connections
Ideal for use with Raymarine i70 and ST70 Plus digital instrument systems

itc-5 instrument transducerThe itc5 instrument transducer converter Can use common analog transducer signals with newer digital instrument displays such as the Raymarines i70 and ST70 Plus. The ultra-compact itc5 has connections to house the five most common analog sensors. Depth, speed/temperature, wind, compass and rudder. itc5 immediately converts these 5 analog signals into digital seatalkng protocol. In addition to providing analog-to-digital conversion, the ITC5 also provides all necessary power and communications connections with the transducteur. This greatly simplifies the installation of the new system and also provides owners of older analog instrument screens with a simple and cost-effective way to upgrade to the latest digital display technology. itc5 eliminates the need for expensive smart transducers or a single instrument box. Calibration and alarms can be fully controlled by the i70 or st70 plus instrument. Itc5 is connected to the Raymarines Seatalkng network and can be used with most analog sensors from Raymarine's traditional ST30, ST40, ST50, ST60, ST80 and ST290 series instruments. Additionally, itc5 is used with the Raymarine Fluxgate compass module and rotary and linear rudder feedback sensors to support heading and rudder angle instruments. Features: All-in-one analog-to-digital converter for depth, speed/temperature, wind direction, compass and rudder sensors. It can transmit seatalkng and nmea2000 data to digital instruments, MFDS, etc., and can easily upgrade traditional analog instrument displays without changing sensors. The seatalkng network provides all necessary power and data connections and is ideal for use with Raymarine i70 and ST70 plus digital instruments. systems.
PRODUCT ID: 44938
SKU: NVN-44938
CSKU: CWR-44938
REWRITE: 56049-raymarine-itc-5-analog-to-digital-transducer-converter
MPN: E70010
br> UPC: 723193701164
ASIN: B008A0JJOA
WSKU: RAYE70010
SSKU: RAY-E70010
KSKU: RAYE70010
GSKU: E70010
MSKU:
LSKU:
NAME: Raymarine ITC-5 Analog to Digital Transducer Converter - Seatalk^ng
NAME_EX: RAYMARINE ITC -5 ANALOG TO DIGITAL TRANSDUCER CONVERTER
PTITRE: Raymarine ITC Analog to Digital Transducer Converter -5- Seatalk^ng
TYPE: Navigation and maritime instruments | Transducer Accessories
SELLER: Raymarine
ELECTRONICS> MARINE ELECTRONICS> FISH FINDERS
Sports
Raymarine ITC-5 Instrument Transducer Converter
Title Google: Raymarine Itc5 Analog To SeatalkSupNgS Digital Transducer Converter by Hodges Marine
Sports
Gtags:

Raymarine

GSpecs:

Raymarine ITC-5 Analog to Digital Transducer Converter - Seatalk^ng Product Description iTC-5 Instrument Transducer Converter

iTC-5 Instrument Transducer Converter

The iTC5 Instrument Transducer Converter allows common analog transducer signals to be used with new digital instrument displays like Raymarine's i70 and ST70 Plus. The ultra-compact iTC5 has connections to house the five most common analog transducers; depth, speed/temperature, wind, compass and rudder. The iTC5 instantly converts these 5 analog signals to the SeaTalk^ng digital protocol.

In addition to providing analog-to-digital conversion, the iTC5 provides all power and connection connections. communication required for the transducers. This greatly simplifies the installation of new systems and is also a simple and cost-effective wayomics for owners of old analog instrument screens to upgrade to the latest digital display technology. The iTC5 eliminates the need for expensive "smart" transducers or individual instrument modules. Complete calibration and alarm control is performed via the i70 or ST70 Plus instruments.

The iTC5 connects to Raymarine's SeaTalk^ng network and works with most analog transducers from older Raymarine ST30, ST40, ST50, ST60, ST80 and ST290 series instruments. Additionally, the iTC5 works with Raymarine Fluxgate compass modules as well as rotary and linear rudder feedback transducers to support heading and rudder angle instruments.

Features:

All-in-one analog-to-digital converter for depth, speed/temperature, wind, compass and rudder transducers
EmitsSeaTalk^ng and NMEA2000 data to digital instruments, MFDs and more
Allows easy upgrade of older analog instrument displays without replacing transducers
The SeaTalk^ng network provides all necessary power and data connections
Ideal for use with Ray Marine Digital Instrument Systems i70 and ST70 Plus

itc-5 instrument transducer converter The itc5 instrument transducer converter can use common analog transducer signals with new instrument displays digital such as the Raymarines i70 and st70 plus. The ultra-compact itc5 has connections to house the five most common analog sensors. Depth, speed/temperature, wind, compass and rudder. itc5 immediately converts these 5 analog signals into digital seatalkng protocol. In addition to providing analog conversiondigital-digital, the ITC5 also provides all necessary power and communications connections with the transducer. This greatly simplifies the installation of the new system and also provides owners of older analog instrument screens with a simple and cost-effective way to upgrade to the latest digital display technology. itc5 eliminates the need for expensive smart transducers or a single instrument box. Calibration and alarms can be fully controlled by the i70 or st70 plus instrument.Itc5 is connected to the Raymarines Seatalkng network and can be used with most analog sensors of traditional Raymarine st30, st40, st50, st60 series instruments, st80 and st290. Additionally, itc5 is used with the Raymarine Fluxgate compass module and rotary and linear rudder feedback sensors to support heading and rudder angle instruments. Features: Analog converterAll-in-one digital ic for depth, speed/temperature, wind direction, compass and rudder sensors. It can transmit seatalkng and nmea2000 data to digital instruments, MFDS, etc., and can easily upgrade traditional analog instrument displays without changing sensors. The seatalkng network provides all necessary power and data connections and is ideal for use with Raymarine i70 and ST70 plus digital instruments. systems.

Raymarine ITC-5 Analog to Digital Transducer Converter - Seatalk^ng Related ProductsRaymarine E25025 Thru-Through Speed Transducer
Raymarine E26031 Lexan Retractable Speed/Temperature Sensor

>Raymarine Lexan depth transducer f/ST60 and ST290
Raymarine B45 Bronze speed transducer with fairing block f/ST60
Raymarine M78717 retractable transducer
Speed transducere Raymarine M78716 Bronze
Raymarine ST60 Wind Vane Transducer with 30m Cable
Raymarine E26030 Thru-Hull Depth Transducer - Retractable
Raymarine P79, 600W in-hull f/ST60
Raymarine ST60 Long Arm Masthead Transducer with 30m Cable

Frequently Asked Questions (FAQ) about Raymarine ITC-5 Analog to Digital Transducer Converter - Seatalk digital Raymarine ITC-5 - Seatalk^ng?
What is the exterior color of the product?
What is the type of the product?
ng dimensions and weight of packaging?">What are the dimensions and weight of the Raymarine ITC-5 Analog to Digital Transducer Converter - Seatalk^ng?
What is the connection interface of the product?
What is the product communication method?
ng?">What are the manufacturer's ratings for the Raymarine ITC-5 Analog to Digital Transducer Converter - Seatalk^ng?
Who is Raymarine? Raymarine, the world leader in marine electronics, develops and manufactures the most comprehensive range of Raymarine electronic equipment. to the design, manufacture and distribution of the highest quality marine electronic products and services to the global leisure and light commercial markets. Whether standalone units or fully integrated systems, Raymarine understands boating and what it stands for. takes to make it safer.How to describe the Raymarine ITC-5 Analog to Digital Transducer Converter - Seatalk^ng? compatible with new digital displays

Comes with a lifetime warranty

Lightweight and durable

Product features: - made from 100% recyclable materialss

can be customized for specific needs

Feature Description: - Made from 100% recyclable recycled materials. This makes it eco-friendly and sustainable. - Customizable to meet your needs, so you get exactly what you want.

Connects to new digital instrument displays
Compatible with analog transducer signals
Ultra-compact size

The Raymarine ITC-5 Analog is a versatile and cost-effective way to upgrade your ST60+, i70, ST70+ and ST70. instrument systems at SeaTalkng. It converts signals from traditional transducers used in these systems into SeaTalkng. Transducers for speed, depth, wind, rudder angle and Fluxgate compass can be connected to a single ITC-5 unit.

What is the exterior color of the product? Black/Grey

Transforms ssignals from analog transducers to digital, making them compatible with new digital displays
Comes with a lifetime warranty
Lightweight and durable
Product Features: - made from 100% recyclable materials
can be customized for specific needs
Description of features: - Made from 100% recyclable recycled materials. This makes it eco-friendly and sustainable. - Customizable to meet your needs, so you get exactly what you want.
Connects to new digital instrument displays
Compatible with analog transducer signals
Ultra-compact
The Raymarine iTC-5 converts signals from traditional transducers used in the ST60+, i70, ST70+ and ST70 instrument systems into SeaTalkng.
Transducers for speed, depth, wind, rudder angleand the fluxgate The compass can be connected to the iTC-5 unit
Allows any transducer to be used with the ST60+, i70, ST70+ and ST70 instrument systems.
Offers the ability to use up to two different transducers for each enabled function.
Eliminates the need for multiple instruments.

Analog-to-digital converter all-in-one depth, speed/temperature, wind, compass and rudder transducers
Converts signals from analog transducers used in the Raymarine i70, ST70+ and ST70 instrument systems into SeaTalkng protocol
Voltage: 12V (9-16V DC)
Drawing: 150mA peak
Width: 3 11/16"
Height: 6 7/16"
Depth: 1 3/4"
Waterproof rating: IPX2 splash-proof
Warranty: Two years
Speed, temperature, depth, wind, rudder angle andfluxgate compasses can be connected to one iTC-5 unit, eliminating the need for multiple ST70 pods
Extended SeaTalkng systems can support multiple iTC-5 units
SeaTalkng connections at the base of the unit simply connect the iTC-5 unit to the SeaTalkng backbone*
The iTC5 unit provides all the necessary power and communications connections to the transducers
Works with most analog transducers from older Raymarine ST30, ST40, ST50, ST60, ST80 and ST290 series instruments
iTC5 also works with Raymarine fluxgate compass modules
Connections: SeaTalkng backbone, one SeaTalkng branch, five transducer connections with terminals fork
Accessories included: two ties and a 15 3/4" SeaTalkng branch cable (A06038)

What is the product type? MiscellaneousWhat is the Raymar analog-to-digital transducer converterine ITC-5 - Seatalk^ng package dimensions and weight? ) inches and the weight is: 1.25 lbs.What is the connection interface of the product? Raymarine
Transducer converterWhat is the communication method of the Seatalk NG productWhat are the manufacturer's notes on Raymarine? ITC-5 Analog to Digital Transducer Converter - Seatalk^ng?

Save $61 when you purchase the Analog Transducer Converter -digital Raymarine ITC-5 - Seatalk^ng for only $273 from NVN Marine! Same day dispatch before 3 p.m. Raymarine ITC-5 Analog to Digital Transducer Converter - Seatalk^ng Technical Specifications

Type:	Marine Navigation & Instruments \| Transducer Accessories
Supplier:	Raymarine
Weight:	1.2 lbs
Type:	Miscellaneous
User Guide:	Download PDF
Product installation:	Download PDF

Raymarine ITC-5 Analog to Digital Transducer Converter - Seatalk^ng User ReviewsRaymarine ITC-5 Analog to Digital Transducer Converter - Seatalk^ng Shipping and return

Shipping weight:	1.2 lbs
Box sizes:	2.00 (h) x 7.00 (w) x 9.00 (w)
Cubic feet:	126.0
Returnable:	Yes

For detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.