Raymarine P79S Smart transducer with SeaTalkNG adapter with A80373 and A06045 Marine Navigation & Instruments

The P79 Adjustable In-Hull Depth Transducer is ideal for boats with fiberglass hulls that are looking for quick and easy installation, high-speed performance, or for those who want to minimize drag. The transducer installs inside the boat hull, transmitting and receiving echoes through the solid fiberglass bottom, without any protrusion from the hull. The P79 comes with an innovative flange that installs inside the boat hull using quick-setting marine epoxy. No cutting or drilling is required. Using built-in markings, the flange is aligned to match the dead rise angle of the boat hull. Once installed and made liquid tight, the flange is filled with non-toxic propylene glycol antifreeze and the active transducer cap is attached. Finally, the transducer cap is dialed in and locked in place for a straight beam and returnsmaximum echo. The P79 design accommodates a wide range of dead rise angles from 2 degrees to 22 degrees. This transducer is intended for use on vessels with solid fiberglass hulls up to 5/8 inches thick. The P79 can also be used on aluminum hulls less than 3.8 millimeters thick.

Attributes of the Raymarine T70278

Mounting location: In-hull mounting
Depth: 500 feet maximum depth
Frequency range: 235 kHz frequency
Supported angle: 7 degree beamwidth/0-22 tilt angle degrees/for depth
Cable length: 30 feet

Raymarine T70278 Features and Benefits

With built-in markings, the bridle is aligned for match the dead rise angle of the boat hull
The P79 adjustable in-hull depth transducer is Ideal for boats with cofiberglass transducers looking for quick and easy installation, high speed performance
The transducer installs inside the boat hull, transmitting and receiving echoes through the solid bottom in fiberglass without any protrusions from the hull
Includes an innovative flange that installs inside the boat hull using a quick-adjust marine.e Epoxy
No cutting or drilling is required
2 year limited warranty

Raymarine T70278 Warranties

Raymarine-Global-Limited-Warranty -01 -Jul-17-rev1-0.pdf

P79S Smart™ sensor with SeaTalkNG adapter with A80373 and A06045

The P79S brings depth intelligence to your boat. Featuring Airmar's Smart™ sensor technology, the P79S delivers processed depth data directly to the onboard network for multiple displays to use.

The P79S includes an aluminum plastic mounting baseborn on the central line and secured inside the hull. Then it is filled with non-toxic antifreeze. The transducer is inserted into the base and adjusted for the appropriate offset, ensuring that the beam will be directed downward for maximum echo returns. Antifreeze provides the best means of transmission through solid fiberglass and into the surrounding water. The main advantage of an in-hull transducer is the lack of protrusions outside the hull, making it the perfect choice for towed or lifted boats. Designed for small boats up to 8 m (25') with a strong fiberglass hull.

Airmar's intelligent sensors incorporate microelectronics: the transducer element and signal processor are only a few millimeters apart. The depth transducer signal is processed directly inside the sensor itself. Everything needed to receive data frome depth is a simple cable to a compatible network or display. Available as an analog sensor or digital smart sensor capable of transmitting in NMEA 0183 or NMEA 2000 format.

Features:

Depth only
60 W
235 kHz frequency avoids mutual interference with other echo sounders on the vessel
7° beamwidth
Depth Range:
- The NMEA 0183 model has a maximum depth of 100 m (330')
- The NMEA 2000 model has a maximum depth of 150 m (500')
- Installed with a hand adjustable base. No cutting is required.
NMEA 2000 certified cabin assembly
No holes to drill
Installation in hull can be done while boat is in water
Urethane transducer with adjustable plastic mounting base
Available in NMEA 0183 or NMEA 2000 standard
Certified NMEA 2000 or NMEA 0183 cable
Installed with a hand-adjustable base
No cutting is required

The P79S Smart™ P79S sensor with SeaTalkNG adapter with A80373 and A06045 brings deep intelligence to your boat. Using Airmar's Smart™ sensor technology, the P79S can send processed depth data directly to...
PRODUCT ID: 85180
SKU: NVN-85180
CSKU: CWR-85180
br>REWRITE: 96291-raymarine-p79s-smart-sensor-w-seatalkng-adapter-w-a80373
MPN: T70278
UPC: 723193814505
ASIN: B08BP1G6FW
WSKU:
SSKU :
KSKU: RAYT70278
GSKU:
MSKU:
LSKU: 152-T70278
NAME: Raymarine P79S Smart™ Sensor with SeaTalkNG Adapter with A80373 and A06045
NAME_EX: SMARTDUCER RAYMARINE P79S WITH SEATALK NG ADAPTER
TITLE: Raymarine P79S Smart™ Transducer with SeaTalkNG Adapter with A80373 and A06045
TYPE: Marine Navigation & Instruments | Transducers
SELLER: Raymarine
ELECTRONICS> MARINE ELECTRONICS> FISH FINDERS

Raymarine Axiom 12 RV 12" MFD with RealVision 3D Sonar &
Amazon Category :
Gtags:

GSpecs:

Raymarine P79S Smart™ Transducer with SeaTalkNG Adapter with A80373 and A06045 Product Description

The P79 adjustable in-hull depth transducer is ideal for boats with fiberglass hulls looking for quick and easy installation, high performance speed, or those who want to minimize drag. The transducer installs inside the boat hull, transmitting and receiving echoes through the solid fiberglass bottom, without any protrusion from the hull. The P79 comes with an innovative flange that installs inside the boat hull using quick-setting marine epoxy. No cutting or drilling is required. Using built-in markings, the flange is aligned to match the dead rise angle of the boat hull. Once installed and made liquid tight, the flange is filled with non-toxic propylene glycol antifreeze and the active transducer cap is attached. Finally, the capof the transducer is dialed in and locked in place for a straight beam and maximum echo returns. The P79 design accommodates a wide range of dead climb angles from 2 degrees to 22 degrees. This transducer is intended for use on vessels with solid fiberglass hulls up to 5/8 inches thick. The P79 can also be used on aluminum hulls less than 3.8 millimeters thick.

Raymarine T70278 Attributes

Mounting Location: In Hull Mount
Depth: Maximum depth 500 feet
Frequency range: 235 kHz frequency
Supported angle: 7 degree beam width /Elevation angle 0 to 22 degrees/For depth
Cable length: 30 feet

Raymarine T70278 Features and Benefits

Using built-in markings, the flange is aligned to match the elevation angle of the boat's hull
The P79 adjustable in-hull depth transducer is ideal for boats featuring fiberglass hulls looking for quick, easy installation and high speed performance
Transducer InstallationAll inside the boat hull, transmitting and receiving echoes through the solid fiberglass bottom without any protrusions from the hull.
Features an innovative flange that installs inside the boat hull using quick-setting marine epoxy
No cutting or drilling is required
2 year limited warranty

Raymarine T70278 Warranties

Raymarine-Global-Limited-Warranty -01-Jul-17 -rev1-0.pdf

P79S Smart™ sensor with SeaTalkNG adapter with A80373 and A06045

The P79S brings deep intelligence to yourboat. Featuring Airmar's Smart™ sensor technology, the P79S delivers processed depth data directly to the onboard network for multiple displays to use.

The P79S includes a line-aligned plastic mounting base central and secure inside the hull. Then it is filled with non-toxic antifreeze. The transducer is inserted into the base and adjusted for the appropriate offset, ensuring that the beam will start downward for maximum echo returns. Antifreeze provides the best means of transmission through solid fiberglass and into the surrounding water. The main advantage of an in-hull transducer is the absence of protrusions outside the hull, making it the ideal choice for towed or lifted boats. Designed for small boats up to 8 m (25') with a strong fiberglass hull.

Airmar's intelligent sensors incorporate microelectronics: lThe transducer element and the signal processor are only a few millimeters apart. The depth transducer signal is processed directly inside the sensor itself. All that is needed to receive depth data is a simple cable to a compatible network or display. Available as an analog sensor or digital smart sensor capable of transmitting in NMEA 0183 or NMEA 2000 format.

Features:

Depth only
60 W
235 kHz frequency avoids mutual interference with other echo sounders on the vessel
7° beamwidth
Depth Range:
- The NMEA 0183 model has a maximum depth of 100 m (330 ft)
- The NMEA 2000 model has a maximum depth of 150 m (500 ft)
- Installed with a hand adjustable base. No cutting is required.
NMEA 2000 certified cable assembly
No holes to drill
In-hull installation can be done while the boat is in the water
Urethane transducer with adjustable plastic mounting base
Available in NMEA 0183 or NMEA 2000 standard
NMEA 2000 or NMEA 0183 cable certified
Installed with a hand adjustable base
None cutting is required

The P79S Smart¢â€ž¢ Sensor The P79S with SeaTalkNG adapter with A80373 and A06045 brings deep intelligence to your boat. Using Airmar's Smart™ sensor technology, the P79S can send processed depth data directly to...

Raymarine P79S Smart™ sensor with SeaTalkNG adapter with associated products A80373 and A06045

Frequently asked questions (FAQ) about the Raymarine P79S Smart™ sensor with SeaTalkNG adapter with A80373 and A06045 Who is the Raymarine?
How to describe the Raymarine P79S Smart™ sensor with SeaTalkNG adapter aITH A80373 and A06045?
What is the weight of the product?
What is the length of the cable?
Who is the Raymarine? Raymarine, world leader in marine electronics, develops and manufactures the most complete range of electronic equipment. Raymarine is dedicated to the design, manufacture and distribution of the highest quality marine electronic products and services to the recreational and light commercial markets worldwide. From stand-alone units to fully integrated systems, Raymarine understands boating and what it takes to make it safer. How to describe the Raymarine P79S Smart™ Sensor with SeaTalkNG Adapter with A80373 and A06045? The P79S Smart™ P79S Sensor with SeaTalkNG Adapter with A80373 and A06045 brings deep intelligence to your boat. Using Airmar's Smart™ sensor technology, PLe 79S can send processed depth data directly to.... What is the weight of the product? 6How long is the cable? 30 feet

Save $59 when you purchase the Raymarine P79S Smart™ Sensor with SeaTalkNG Adapter with A80373 and A06045 for only 330 $from NVN Marine! Same day dispatch before 3 p.m. Raymarine P79S Smart™ Transducer with SeaTalkNG Adapter with A80373 and A06045 Technical Specifications

Type:	Marine Navigation & Instruments \| Transducers
Supplier:	Raymarine
Weight:	2.85 lbs

Raymarine P79S Smart™ transducer with SeaTalkNG adapter with A80373 and A06045 Customer reviews usersRaymarine P79S Smart™ Sensor with SeaTalkNG Adapter with A80373 and A06045 Shipping & Returns

Shipping Weight:	2.85 lbs
Box sizes:	0.00 (h) x 0.00 (w) x 0,00 (l)
Cubic feet:	0.0
Regovable:	Yes

For detailed shipping terms, please review our shipping policy and you can find our return and refund policy here.