Ronstan Series 60 Core Block - Single Sailing

Series 60 Base Blocks - Simple

Base blocks are a true multi-purpose solution. An optimized 2-stage bearing system provides excellent performance across the entire working load range with an integrated thrust bearing function and the resilience to support high dynamic or static loads. An acetal pulley, alloy cheeks and stainless steel fixings complete the durable package. For their reliability and long life, these blocks are the right choice for sheeting, halyard and control line applications for cruising and racing.

Universal bearing
Dynamic static load and high performance

The Ronstan universal bearing incorporates our proven 2-stage bearing system

Stage 1 - Under moderate loads , acetal ball bearings ensure minimum friction.

br>Stage 2 - Under heavy loads, wheredeformation of the ball bearings alone would result in increased friction, an acetal sliding bearing on a polished stainless steel ring takes over, maintaining low friction performance.

Additionally, the ball bearings are configured to act as a thrust bearing between the pulley and the cheeks, preventing the pulley from rubbing on the cheeks and causing friction when the entry and exit of the block line is not perfect. Particularly important for cheek blocks.

Alloy Cheek Plates
Block cheeks are made from the highest quality alloy for maximum strength . Material optimization and cut-out design minimize weight and allow easy fresh water rinsing of salt and debris from bearings. The cheek design has been improved with a flare at the block throat and a reduced gap between the cheek and pulley, minimizing thecable wear.

Universal head
The head assembly incorporates a brass washer bearing to ensure smooth 360 rotation of the post and shackle. A set screw arrangement allows the head to be locked at 0 or 90.

Shackles are made of high quality forged 316 grade stainless steel.

Features:

Leading in class performance and sleek, contemporary styling
Excellent high dynamic and static load performance
Less than half the friction of the nearest competitor
Universal head with full 3-axis articulation
Head posts can be locked at 0 or 90 degrees using a 2.5mm Hex/Allen wrench
The center hub hole can be used as a becket take-off or lashing point

Applications:

Ideal for mainsheet, dris sheet applicationsse and spinnaker on boats up to 12M (40')
Various control line applications on larger yachts

Materials:

Sheave: U.V. Stabilized acetal
Cheek body: aluminum alloy
Ball bearings: high compressive strength carbon black acetal
Shackle, head post & hub: 316 grade stainless steel

Specifications:
Pulley Ø:60 mm (2-3/8")
Max. rope Ø: 12 mm(1/2")
Spindle Ø:6 mm(1/4")
M.W.L.:1,000kg( 2,200 lb)
B.:2,000 kg(4,410lbs)
Weight:235g(8.3oz)

The central module Ronstan is a true all-round solution. The tuned two-stage bearing system has a built-in thrust function and flexibility to cope with high dynamic or static loads, and can provide excellent performance over the entire load range.work. The choice of acetal and aluminum pulleys, alloy cheeks and stainless steel fixings complete the durable package. For their reliability and long life, these basic elements are the right choice for plating, rope and control line applications for cruising and racing.
PRODUCT ID: 55260
SKU: NVN-55260
CSKU: CWR-55260
REWRITE: 66371-ronstan-series-60-core-block-153-single
MPN: RF64100
br> br> UPC: 9316800446070
ASIN: B005MZA2YM
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Ronstan Series 60 Core Block - Single
NAME_EX: RONSTAN SERIES 60 CORE BLOCK SINGLE
PTITLE: Ronstan Series 60 Core Block - Single
TYPE: Sailing | Blocks
SELLER: Ronstan
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES> SAILBOAT PARTS
GPS or Navigation System
Ronstan Series 60 Core Block153; - Single
Ronstan Core Blocks, Series 60, Single Block | For sailing
GPS or navigation system
Gtags:

Ronstan

GSpecs:

Ronstan Series 60 Core Block - Single Product Description Series 60 Core Block - Single

Core blocks are a true complete solution. An optimized 2-stage bearing system provides excellent performance across the entire working load range with an integrated thrust bearing function and the resilience to support high dynamic or static loads. An acetal pulley, alloy cheeks and stainless steel fixings complete the durable package. For their reliability and long life, these blocks are the right choice for sheeting, halyard and control line applications for cruising and racing.

Universal bearing
Dynamic static load and high performance

The Ronstan universal bearing incorporates our proven 2-stage bearing system

Stage 1 - Under moderate loads , acetal ball bearings ensure minimum friction.

br>Stage 2 - Under heavy loads, where deformation of the ball bearings alone would result in increased friction, an acetal sliding bearing on a polished stainless steel stainless steel bushing takes over, maintaining low friction performance.

In addition, the ball bearings are configured to act as a stop between the pulley and the cheeks, preventing the pulley from rubbing on the cheeks and causing friction when the line moves forward. getting in and out of the block is not perfect. Particularly important for cheek blocks.

Alloy Cheek Plates
Block cheeks are made from the highest quality alloy for maximum strength . Material optimization and cut-out design minimize weight and allow easy fresh water rinsing of salt and debris from bearings. The cheek design has been improved with a flare at the block throatand a reduced gap between the cheek and pulley, minimizing cable wear.

Universal head
The head assembly incorporates a brass washer bearing to ensure a smooth 360 rotation of the post and shackle. A set screw arrangement allows the head to be locked at 0 or 90.

Shackles are high quality forged from grade 316 s.stainless steel.

Features:

Leading performance and sleek, contemporary styling
Excellent dynamic and high static load performance
Less than the half the friction of the nearest competitor
Universal head with full 3-axis articulation
Head posts can be locked at 0 or 90 degrees at using a 2.5mm hex/allen wrench
Center hub hole can be used as a takeoff point or ring attachment point

Applications:

Ideal forMainsail, halyard and spinnaker sheet applications on boats up to 12M (40')
Various control line applications on larger yachts

Materials:

Sheave: U.V. Stabilized acetal
Cheek body: aluminum alloy Aluminum
Ball Bearings: High Compression Strength Carbon Black Acetal
Shackle, Head Post & Hub: Grade 316 Stainless Steel
/li>

Specifications:
Pulley Ø:60 mm (2-3/8")
Max. RoØ pe:12 mm(1/2")
Spindle Ø:6 mm(1/4")
M.W.L. :1,000 kg(2,200 lbs)
B.:2,000 kg(4,410 lbs)
Weight:235g(8.3oz)

The Ronstan core module is a true all-round solution. The tuned two-stage bearing system has a built-in thrust function and flexibility to cope with high dynamic or static loads, and can provide excellent performance. performednces across the entire workload range. The choice of acetal and aluminum pulleys, alloy cheeks and stainless steel fixings complete the durable package. For their reliability and long life, these basic elements are the right choice for plating, rope and control line applications for cruising and racing.

Frequently Asked Questions (FAQ) about the Ronstan Series 60 Core Block - Single Who is the Ronstan?
How to describe the Ronstan Series 60 Core Block - Single?
Who is the Ronstan? The sailboat fittings market and the architectural rigging market are worlds apart, but in Australia they are both dominated by a single powerful player. Ronstan's end-to-end design, manufacturing and distribution operations have become the only serious competitor. Internationally, Ronstan is one of the three largest boat fittings brandsoil producers in the world, instantly recognized and respected in 45 countries. How to describe the Ronstan Series 60 Core Block - Single? The Ronstan basic module is a truly complete solution. The tuned two-stage bearing system has a built-in thrust function and flexibility to cope with high dynamic or static loads, and can provide excellent performance over the entire working load range. The choice of acetal and aluminum pulleys, alloy cheeks and stainless steel fixings complete the durable package. For their reliability and long life, these basic elements are the right choice for plating, rope and control line applications for cruising and racing.

Save $17 when you purchase the Ronstan SSeries 60 Core Block - Simple for only $96 from NVN Navy! Same day dispatch before 3 p.m. Ronstan Series 60 Core Block - Specificationsimple technical ions

Type:	Sail \| Blocks
Seller:	Ronstan
Weight:	0.6 lbs

Ronstan Series 60 Core Block - Single User ReviewRonstan Series 60 Core Block - One-Time Shipping and Returns

Shipping Weight:	0.6 lbs
Box Sizes:	2.00 (h) x 4.00 (w) x 7.00 (w)
Cubic feet:	56.0
Returnable:	Yes
USPS First Class:	Yes