Rule 1100GPH standard bilge pump - 12V Marine Plumbing & Ventilation

Our new range of small bilge pumps offer the ultimate pumping performance, now more efficient than ever, providing full rated flow at just 12 volts instead of 13.6 volts.

Rule 27DA Attributes

Type: Submersible
Rated voltage: 12V DC
Flow rate: 1,100 gallons per hour
Port type: 1-1 /8 inch
Width: 2-3/8 inches
Height: 4-1/4 inches
With thermal overload protection: Yes

27DA Rule Features and Benefits

Higher Flow – Optimized turbine delivers greater flow at the same amperage
Integrated Thermal Cutoff (TCO) provides additional protection for pump and tank
Backflow Prevention – Non-return prevents water left in the drain from flowing back, keeping bilges drier and cleaner.
Openings Ventilation – Integrated into the body, helps prevent air blockagein difficult plumbing installations
Offer straight or 90 degree ports depending on your installation
Limited to 3 yearsWarranty

Standard Bilge Pump 1,100 GPH - 12V

Customers talk about flow, they want water out of the bilge, and
quickly. Improved design and performance mean our next generation 1,100 GPH pump will produce this flow at just 12V instead of 13.6V as previously required...more typical of on-board voltage supply.

Our new generation of Rule pumps include valve control and to do this, we have created a hidden vent to avoid the airlock. Under each strainer tab is a small hole that vents any air trapped in the pump housing, thus avoiding airlocks...and that's how we do it.

We have a true electromagnetic suppression (EMC). We have an integrated thermal cell which prProtects the pump and the vessel when things get too hot.

We've redesigned the interior and exterior of our bilge pumps, starting with a blank slate. And we're just getting started

Features:

Non-automatic - used with a panel switch or ruler float switch
Submersible and ignition protected
High efficiency, low amperage motor
Stainless steel shaft
Includes check valve

This product can expose you to chemicals including 1,3-butadiene , known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,

Customers talk about traffic, they want water to flow out of the bilge, and at a faster rate fast. A design andimproved performance means our new 1,100 GPH pump will only cost 12... Standard 1,100 gph-12V Bilge Pump
MPN: 27DA
UPC: 042237104724
ASIN: B01LXUOWCN
WSKU:
SSKU:
KSKU: STANDARD RULE 1100 GPH 12V BILGE PUMP
PTITLE: Standard Rule 1100GPH Bilge Pump - 12VPRODUCT TYPE: Marine Plumbing & Ventilation | Bilge Pumps
SELLER: Rule
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
Sports
Rule 1100 GPH 27DA Standard Bilge Pump -1100
br> Rule 27da Standard Bilge Pump - 1100 GPH, Size: 4 in.
Sports
Gtags:

GSpecs:

Rule 1100GPH Standard Bilge Pump - 12V Product Description

Our new range of small bilge pumps offer ultimate pumping performance, now more efficient than ever, providing full rated flow at just 12 volts instead of 13, 6 volts.

Rule 27DA attributes

Type: Submersible
Rated voltage: 12V DC
Flow rate: 1,100 gallons per hour
Port Type: 1-1/8 inch
Width: 2-3 /8 inches
Height: 4-1/4 inches
With protection against thermal overloads: Yes

Rule 27DA Features and Benefits

Higher Flow – Optimized turbine provides greater flow at the same amperage
Integrated thermal cut-off (TCO) provides additional protection forr the pump and tank
Backflow prevention – Non-return prevents water from remaining in the di
Aeration vents – Built into the body, they help to prevent air blockage in difficult plumbing installations
Offer straight or 90 degree ports depending on requirements. Your installation
3 year limited warranty

Standard bilge pump 1,100 GPH - 12 V

Customers talk about flow, they want water out of the hold, and
quickly. Improved design and performance mean our next generation 1,100 GPH pump will produce this flow at just 12V instead of 13.6V as previously required...more typical of on-board voltage supply.

Our new generation of Rule pumps include valve control and to do this, we have created a hidden vent to avoid the airlock. Under each strainer tab is a small hole that vents any air trapped in the housingier of the pump, thus avoiding airlocks... and this is how we do it.

We have true electromagnetic suppression (EMC). We have a built-in heat cell that protects the pump and container when things get too hot.

We have redesigned the interior and exterior of our bilge pumps, starting with a blank slate. And we're just getting started

Features:

Non-automatic - used with a panel switch or Rule float switch
Submersible and ignition protected
High efficiency, low amperage motor
Stainless steel shaft
Includes a preventative backflow

This product can expose you to chemicals including 1,3-butadiene, known by the State of California to cause cancer, birth defects or other reproductive harm. PFor more information, go to P65Warnings.ca.gov.

Customers talk about traffic, they want water to flow out of the bilge, and at a faster rate fast. Improved design and performance mean our new 1,100 GPH pump will only cost $12...

Rule 1,100 GPH Standard Bilge Pump - 12V Related ProductsRule ECO-Switch Bilge Pump Switch automatic wedge
Rule-A-MaticPlus Float Switch
Rule-A-Matic Float Switch
Rule-A-Matic Float Switch with Fuse Holder
BoatLIFE Silicone Rubber Seal Cartridge - Clear
BoatLIFE Silicone Rubber Sealant Cartridge - White
BoatLIFE Silicone Rubber Tube - 2.8 FL. Oz - Clear
BoatLIFE Silicone Rubber Tube - 2.8 FL. Oz - White

Frequently asked questions (FAQ) about the Rule 1100GPH standard bilge pump - 12V Who is the Rule?
How to describe the bilge pumpRule Standard Bilge Pump 1100GPH - 12V? What is the operating voltage of the product? What is the operating voltage of the product? What is the warranty policy for the Rule Standard Bilge Pump 1100GPH - 12V?
What is the product type?
What is the Rule 1100GPH Standard Bilge Pump - 12V Package Dimensions and Weight?
What is the amperage of the product?
What is the output size of the product?
What is the capacity of the product?
What is the operating mode of the product, automatic?
What is the diameter of the product?
What is the working capacity of the product (GPH)?
Who is the rule? In 1998, Rule was acquired by ITT Corporation and became part of the Marine & Leisure family of companies. Rule is a global leader in submersible bilge pumps for the recreational boat and small commercial boat markets and a leading supplier of accessory products tsuch as ventilation fans and winches. Look for the Rule name and vague logo when you need the best product performance and durability. How to describe the Rule 1100GPH - 12V Standard Bilge Pump? Customers talk about traffic, they want the water to drain from the bilge, and faster. Improved design and performance mean our new 1,100 GPH pump will only cost 12... What is the operating voltage of the product? 12

Increased water flow without increasing amperage consumption
Thermal cut-out prevents damage to the pump and the boat in the event of a blocked by debris
Reduction of residual bilge water and resulting odors
Prevention of air pockets thanks to vents in the pump body
Simplified maintenance with threaded discharge and clip-on base

What is the operating voltage of the produit? 24 VoltsWhat is the warranty policy for the Rule 1100GPH Standard Bilge Pump - 12V? Three-year limited warranty; Contact manufacturer for detailsWhat is the product type? SubmersibleWhat is Rule 1100GPH Standard Bilge Pump - 12V Package Dimensions and Weight? 2-3/8 inches (w) X 4-1/4 inches (h) X (w) inches and the weight is: 0.9 lbs. What is the amperage of the product? 1.7What is the output size of the product? 3/4"What is the capacity of the product? 800 gallons per hourWhat is the working mode of the product, automatic? Non-automaticWhat is the diameter of the product? 3/4 inchWhat is the working capacity of the product (GPH)? 1100 GPH

Save $24 when you purchase the Rule 1100GPH Standaème Bilge Pump - 12V for only $50 NVN Marine! Same day dispatch before 3pm Rule 1100GPH Standard Bilge Pump - 12V Technical Specifications.

Type:	Marine plumbing and ventilation \| Bilge pumps
Seller:	Rule
Weight:	0.8 lbs
Type:	Electric
Gallons per hour:	1,100 GPH
Operation:	Non-automatic
Output size:	3/ 4"
Volts:	12v
Product Brochure:	Download PDF

Rule 1100GPH Standard Bilge Pump - 12V User ReviewsBilge Pump standard wedge Rule 1100GPH - 12V Shipping and withdrawal

Shipping weight:	0.8 lbs
Box sizes:	4.00 (h) x 7.00 (w) x 7.00 (w)
Cubic feet:	196.0
Returnable:	Yes
P65:	Yes

For detailed shipping terms, please see our Shipping Policy and you You can find our return and refund policy here.