Rule-Mate 800 Fully Automated Bilge Pump - 12V Marine Plumbing & Ventilation

Rule-Mate bilge pumps deliver the ultimate pumping performance, helping to keep your bilge free of harmful water, building on authentic Rule design. Rule-Mate bilge pumps operate using an internal level sensor. When the water reaches 2 inches, the pump automatically activates, removing water from the bilge. When the water level reaches 3/8 inch, the pump turns off until the water level rises again. The holds are not always clean and free of debris. If the Rule-Mate level sensor becomes clogged with debris or contaminated water, its unique backup feature will prevent the pump from entering operating condition, protecting the battery while maintaining automatic operation.

RM800B Ruler Attributes

Type: Automatic Submersible
Rated Voltage: 12 Volts
Flow: 800 Gallons Per Hour
Type of port: 3/4 inch barb
Length: 5.08inches
Width: 2.85 inches
Height: 4.38 inches
With thermal overload protection: No

Rule RM800B Features and Benefits

Higher Flow: Impeller optimized to deliver up to 10 percent more flow at the same amperage than previous models with capacities from 500 to 2,000 GPH
Auto sensing intelligence: Built-in water level sensor automatically controls the pump.
Backup function: prevents continuous operation if the sensor is clogged with debris, the pump returns to cycle mode 2.5 minutes
Small footprint: 2/3 of previous size Models
Integrated thermal cut-off: provides additional protection for pump and tank
Backflow Prevention: Reduces the amount of water remaining in the bilge, reducing odors and helping to keep your bilge cleaner
Hidden in-body air vents: aito prevent air blockage in difficult plumbing installations and helps with check valve
Threaded discharge: easier installation and maintenance
No supplier guarantee

Rule RM800B Installation Instructions

bilge-pump-rule-mate-500-1100-gph.pdf

Rule RM800B Technical Bulletins

ngr-rulemate-bilge-pumps.pdf
ngr-rulemate-bilge-pumps.pdf

Fully automated bilge pump Rule-Mate 800 - 12V

Features:

Advanced water detection technology
Pump turns on when water level rises and stops when water is removed
No float switch required
800 GPH/3,028 LPH
Anti-fouling hole
Submersible
Protected against ignition
Includes anti-return device
3 year warranty

The automatic bilge pumpThe Rule-Mate Series features a mercury-free pump and float switch in a compact package. When the float rises, the pump starts. No...
PRODUCT ID: 75164
SKU: NVN-75164
CSKU: CWR-75164
REWRITE: 86275-rule-rule-mate-800-fully-automated-bilge-pump
br>MPN: RM800B
UPC: 042237106223
ASIN: B07L3LCHYF
WSKU:
SSKU:
KSKU: X69RM800B
GSKU:
MSKU:
LSKU: 29- RM800B
NAME: Rule Rule-Mate 800 Fully Automated Bilge Pump - 12V
NAME_EX: RULE MATE 800 AUTOMATIC BILGE PUMP 12V
PTITLE: Rule Rule-Mate 800 Fully Automated Bilge Pump - 12V
TYPE: Marine Plumbing and Ventilation | Bilge Pumps
SELLER: Rule
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
Automotive Parts & Accessories
Rule Mate Fully Automated , water detection Bilge pump
Titre Google: Rule Mate 800 12V RM800B Automatic Bilge Pump 042237106223
Automotive Parts and Accessories
Gtags:

Boat

GSpecs:

Rule Rule-Mate 800 Fully Automated Bilge Pump - 12V Product Description

Rule-Mate bilge pumps provide ultimate pumping performance, which helps keep your bilge free of harmful water, ensuring building on Rule's original design. Rule-Mate bilge pumps operate using an internal level sensor. When the water reaches 2 inches, the pump automatically activates, removing water from the bilge. When the water level reaches 3/8 inch, the pump turns off until the water level rises again. The holds are not always clean and free of debris. If the Rule-Mate level sensor becomes clogged with debris or contaminated water, its unique backup feature will prevent the pump from entering an operating state, protecting the battery while maintaining automatic operation.

Attributes of the RM800B rule

Type: Automatic submersible
Voltage nRating: 12 Volt
Flow: 800 gallons per hour
Port Type: 3/4 inch Barb
Length: 5.08 inch
Width: 2.85 inches
Height: 4.38 inches
With thermal overload protection: No

Rule RM800B Features and benefits

Higher Flow: Optimized Turbine to deliver up to 10% more flow at the same amperage than previous models with capacities from 500 to 2,000 GPH
Auto-sensing intelligence: the sensor Built-in water level automatically controls pump
Backup Feature: Prevents continuous operation if sensor becomes clogged with debris, pump returns to 2.5 minute cycle mode.
Reduced footprint: 2/3 the size of the previous modelsnts
Integrated thermal cutoff Disabled: provides additional protection for the pump and container.
Backflow prevention: reduces the amount of water remaining in the bilge, reducing odors and helping to keep your bilge cleaner
Hidden Air In-Body Vents: Helps prevent air blockage in difficult plumbing installations and helps with the check valve.
Threaded Discharge: Easier Installation and Maintenance
No Supplier Warranty

Rule RM800B Installation Instructions

bilge-pump-rule-mate- 500-1100-gph.pdf

Rule RM800B Technical Bulletins

ngr-rulemate-bilge -pumps.pdf
ngr-rulemate-bilge-pumps. pdf

Rule-Mate 800 Fully Automated Bilge Pump - 12V

Features:

Advanced water sensing technology
Pump turns on when water level risesand shuts off when water is removed
No float switch required
800 GPH/3,028 LPH
Anti-fouling hole
Submersible
Protected against ignition
Includes anti-return device
3 year warranty

The Rule-Mate Series automatic bilge pump features a mercury-free pump and float switch in a compact package. When the float rises, the pump starts. No...

Rule Rule-Mate 800 Fully Automated Bilge Pump - 12V Related ProductsBoatLIFE Silicone Rubber Sealant Cartridge - Clear
BoatLIFE Silicone Rubber Sealant Cartridge - White
BoatLIFE Silicone Rubber Tube - 2.8 FL. Oz - Clear
BoatLIFE Silicone Rubber Tube - 2.8 FL. Oz - White

Frequently Asked Questions (FAQ) about the Rule Rule-Mate 800 Fully Automated Bilge Pump - 12V Who is the Rule?
Comment describe Rule Rule-Mate 800 Fully Automated Bilge Pump - 12 V?
What is the operating voltage of the product?
What is the operating voltage of the product?
What is the Rule Warranty Policy Rule-Mate 800 Fully Automated Bilge Pump - 12V?
What is the product type?
What is the Rule Rule-Mate 800 Fully Automated Bilge Pump - Dimensions and weight of the 12 V package?
What is the amperage of the product?
What is the capacity of the product?
What is the operating mode of the product, automatic?
br/> What is the diameter of the product?
What is the working capacity of the product (GPH)?
What is the activation method of Rule Rule-Mate 800 Fully Automated Bilge Pump - 12 V?
Who is the rule? In 1998, Rule was acquired by ITT Corporation and became part of the Marine & Leisure family of companies. Rule is a global leader in pumpssubmersible bilges for the recreational boat and small commercial boat markets and a leading supplier of accessory products such as ventilation fans and winches. Look for the Rule name and vague logo when you need the best product performance and durability. How to describe the Rule-Mate 800 Fully Automated Bilge Pump - 12V? The Rule-Mate Series Automatic Bilge Pump features a mercury-free pump and float switch in a compact package. When the float rises, the pump starts. No... What is the operating voltage of the product? 12 Volts

What is the working voltage of the product? 12What is the warranty policy for Rule-Mate 800 Fully Automated Bilge Pump - 12V? Three-year limited warrantyWhat is the product type? Automatic SubmersibleWhat is Rule- Fully Automated Bilge PumpMate 800 - 12V Package Dimensions and Weight? 2.85 inches (W) X 4.38 inches (H) X 5.08 inches (W) inches and the weight is: 1.1 lbs. What is the amperage of the product? 3What is the capacity of the product? 800 gallons per hourWhat is the operating mode of the product, automatic? AutomaticWhat is the diameter of the product? Hose Barb Connector ¾â€What is the working capacity of the product (GPH)? 800 GPHWhat is the method of activating the Rule-Mate 800 Fully Automated Bilge Pump - 12V? Automatic

Save $44 when you purchase the Rule-Mate 800 Fully Automated Bilge Pump - 12V for only $87from NVN Marine! Same day dispatch before 3 p.m. Rule Rule-Mate 800 Fully Automated Bilge Pump - 12V Technical SSpecifications

Type:	Marine Plumbing & Ventilation \| Bilge pumps
Seller:	Rule
Weight:	1.2 lbs
Type:	Electric
Operation:	Automatic
Gallons per hour:	800 GPH
Volts:	12v

Rule Rule-Mate 800 Fully Automated Bilge Pump - 12V User ReviewsRule Rule- Mate 800 Fully Automated Bilge Pump - 12V Shipping & Returns

Shipping Weight:	1.2 lbs
Box sizes:	4.00 (h) x 7.00 (w) x 9.00 (w)
Cubic feet:	252.0
Returnable :	Yes

For detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.