Samlex 50A Battery Charger - 12V - 2 Bank - 3 Stage with DIP Switch and Terminals - Includes Temperature Sensor Electrical
This advanced fully automatic three stage 50 amp battery charger is ideal for charging all types of 12 volt lead acid batteries (flooded/absorbed glass mat (AGM)/gel cell) from a 120 volts, 60 Hertz or 230 volts. , 50 Hertz AC source. By means of a DIP switch setting, conversion to a two-step algorithm is possible for charging batteries connected to a DC load (DC UPS). The unit can also be used as a DC power supply. Features include overload, short circuit and overheat protection. Unit allows charging of up to 2 separate battery banks.
Samlex America SEC1250UL Attributes- Number of Banks: 2
- Application: 12 Volt AGM/Flooded/Gel Lead- Acid Batteries
- Output voltage: 12 volts
- Input voltage: 120 to 230 volts
- Rated current: 50 amps on load
- Number of Steps: 2/3 steps
- Universeity: Completely universal
- Length (IN): 13.03 inches
- Width (IN): 9.61 inches
- Height (IN): 3. 82 inch
- Switch mode technology for high efficiency, lightweight and quiet operation
- Automatic operation for ALL batteries at flooded lead, AGM or gel cell
- Can charge 2 battery banks simultaneously, no isolator required
- Can be used as a DC power supply or UPS when used in conjunction with a battery
- Protections: short circuit, overload, reverse battery Connection and overheating
- 2 year limited warranty
- 11001-SEC-1250-2425UL-0920_Hrez.pdf
- 12001-SEC-1250UL-0920.pdf
Battery charger 50 A - 12 V - 2 banks - 3 shelvestaps with DIP switch and terminals - Includes temperature sensor
This advanced fully automatic three-stage 50 amp battery charger is ideal for charging all types of 12 volt lead acid batteries (Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to an algorithm two steps is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC power supply. Features include overload, short circuit and overheat protection. The unit allows charging of up to 2 separate battery banks.
Features:
- Switch mode technology for operation at high efficiency, lightweight and quiet
- Automatic operation for ALL flooded lead acid, AGM or gel cell batteries
- Can charge 2 battery banks simultaneously, no isolator needed
- Can be used as a power supply or DC UPS when used in conjunction with a battery
- Voltage User configurable AC input 120 or 230 VAC, 50/60 Hz
- User selectable (via DIP switch) for 2 or 3-stage fast and safe charging of self-contained lead-acid batteries and charged
- "Half power mode" reduces the maximum charging current to half the rated capacity, allows lower capacity batteries to be safely charged
- Voltmeter and ammeter for monitoring
- Fan cooled based on output current
- Protections: Short circuit, overload, reverse battery connection and overheating
- Includes temperature sensor to prevent battery under/overcharging if temperature fluctuates significantly
Specifications:
- Input: 120 VAC 60 Hz or 230 VAC 50 Hz
- Output: 12 VDC
- Amps: 50
- Remote control: 900-RC
- Weight: 9.0 (lbs)
- Weight: 4.1 (kg)
- Dimensions : 13.03 x 9.60 x 3.82 (in)
- Dimensions: 331 x 244 x 97 (mm)
- Safety: listed according to UL standard UL-1564, EMI compliant with FCC Part 15(B), Class B
- Warranty: 2 years limited
Applications:
- Automotive
- Recreational vehicles
- Marine
- Communications sites
- Battery backup systems
If the size is true, they can even charge batteries already exposed to external loads! Charging rate is 10 to 80 amps, depending on model you can also...
PRODUCT ID: 67189
SKU: NVN-67189
CSKU: CWR-67189
REWRITE: 78300 -samlex-50a-12v-battery-charger
MPN: SEC-1250UL
UPC: 622988083037
ASIN: B00C5MZU9C
WSKU:
SSKU:
KSKU: S6ASEC1250UL
GSKU:
MSKU:
LSKU: 705-SEC1250UL
NAME: Samlex 50A Battery Charger - 12V - 2 Banks - 3 stages with DIP switch and terminals - Includes temperature sensor
EX_NAME: SAMLEX SEC -1250UL 2 BANK 3 STAGE BATTERY CHARGER 12V 50
PTITLE: Samlex 50A Battery Charger - 12V - 2 banks - 3 stages with DIP switch and terminals - Includes temperature sensor
TYPE: Electric | Battery Chargers
SELLER: Samlex America
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES
Automotive Parts & Accessories
Samlex Solar SEC -1250UL SEC -UL Series 12V Battery Charger
Samlex America Samlex 50A Battery Charger - 12V - 2 Bank - 3 Stage with Dip Switch Terminals - Includes Temperature Sensor [SEC-1250UL]
Parts and accessoriesautomotive ires
Gtags:
GSpecs:
Samlex 50 Amp Battery Charger - 12V - 2 Bank - 3 Stage with DIP Switch and Terminals - Includes Temperature Sensor Product Description
This advanced fully automatic three stage 50 amp battery charger is ideal for charging all 12V cable types. -acid batteries (flooded/absorbed glass (AGM) mat/gel cell) from a 120 volt, 60 Hertz or 230 volt, 50 Hertz AC source. By means of a DIP switch setting, conversion to a two-step algorithm is possible for charging batteries connected to a DC load (DC UPS). The unit can also be used as a DC power supply. Features include overload, short circuit and overheat protection. The unit allows charging of up to 2 separate battery banks.
Samlex America SEC1250UL Attributes- Number of Banks: 2
- Application: Batteries lead-acid AGM/flooded/gel 12 volt
- Output voltage: 12 volt
- Input Voltage: 120 to 230 Volt
- Rated Ampere: 50 Amp Load
- Number of steps: 2/3 steps
- Universality: Completely universal
- Length (IN): 13.03 inches
- Width (IN) : 9.61 inches
- Height (IN): 3.82 inches
- Switch mode technology for high efficiency, light weight and quiet operation
- Automatic operation for ALL flooded lead acid, AGM batteries or gel cell
- Can charge 2 battery banks simultaneously, no isolator needed
- Can be used as a power supplyEU or DC UPS when used in conjunction with a battery
- Protections: short circuit, overload, reverse battery connection and overheating
- 2 year limited warranty
- 11001-SEC-1250-2425UL-0920_Hrez.pdf
- 12001- SEC-1250UL-0920.pdf
50A Battery Charger - 12V - 2 Banks - 3 Stage with DIP Switch and Lugs - Includes Temperature Sensor
This advanced fully automatic three-stage 50A battery charger is ideal for charging all types of 12-volt lead-acid batteries (flooded/absorbed glass mat (AGM)/gel cell). ) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-step algorithm is possible for charging batteries connected to a DC load (DCUPS). The unit can equalcan be used as a DC power supply. Features include overload, short circuit and overheat protection. The unit allows charging of up to 2 separate battery banks.
Features:
- Switch mode technology for operation at high output, lightweight and quiet
- Automatic operation for ALL flooded lead acid, AGM or gel cell batteries
- Can charge 2 battery banks simultaneously, no isolator needed
- Can be used as a DC power supply or UPS when used in conjunction with a battery
- User configurable AC input voltage 120 or 230 VAC, 50/60 Hz
- User selectable (via DIP switch) for fast and safe 2 or 3 stage charging of self-contained and charged lead acid batteries
- "Half Power Mode" reduces the maximum charging current to half the nominal capacitynale, allows you to safely charge low capacity batteries
- Voltmeter and ammeter for monitoring
- Fan cooled depending on the output current
- Protections : short circuit, overload, reverse battery connection and overheating.
- Includes a temperature sensor to prevent under/overcharging of the battery if the temperature varies significantly
Specifications:
- Input: 120 VAC 60 Hz or 230 VAC 50 Hz
- Output: 12 VDC
- Amps: 50
- Remote: 900-RC
- Weight: 9.0 (lbs)
- Weight: 4.1 (kg)
- Dimensions: 13.03 x 9.60 x 3.82 (in)
- Dimensions: 331 x 244 x 97 (mm)
- Safety: UL Listed UL - 1564, compliant with FCC Part 15(B), Class B
- Warranty: 2 years limited
Applications:
- Automobile
- Recreational vehicles
- Marine
- Sitese communication
- Battery Backup Systems
If sized correctly, they can even charge batteries already exposed to external loads! Charging rate is 10 to 80 amps, depending on model you can also...
Samlex 50A Battery Charger - 12V - 2 Banks - 3 Stage with DIP Switch and Lugs - Includes a temperature sensor Related ProductsSamlex f/SEC Remote Control Battery Chargers
Frequently Asked Questions (FAQ) about Samlex Battery Charger 50A - 12V - 2 Banks - 3 Stages with DIP Switch and Terminals - Includes Temperature Sensor Who is the Samlex America? How to Describe the Samlex 50A - 12V - 2 Bank - 3 Station Battery Charger with DIP Switch and Terminals - Includes Temperature Sensor?
Is this product portable?
What is the weight of the product?
What is the size?
What is the voltage output?
What is thethe output voltage?
What is the input voltage?
How many banks support charging?
Who is Samlex America? Develop lasting relationships with our customers by providing innovative power conversion products backed by the best customer service in the industry. Samlex manufactures and distributes power conversion products to customers worldwide. Synonymous with providing quality products at competitive prices and being backed by the best customer service in the industry. How to describe the Samlex 50A Battery Charger - 12V - 2 Bank - 3 Stage with DIP Switch and Terminals - Includes Temperature Sensor? If the size is right, they can even charge batteries already exposed to external loads! The charging rate is 10 to 80 amps, depending on the model, you can also... Is this product portable? No
- What is the weight of the product? 10.6How big is it? 13.0 x 9.6x 3.82What is the output voltage? 12vWhat is the output voltage? 50aWhat is the input voltage? 120/240vHow many banks cover the fees? 2
Save $127on the purchase of the Samlex 50 Amp Battery Charger - 12 V - 2 Banks - 3 Stages with DIP Switch and Terminals - Includes a temperature sensorfor only $511from NVN Marine! Same day dispatch before 3 p.m. Samlex 50A Battery Charger - 12V - 2 Bank - 3 Stage with DIP Switch and Terminals - Includes Temperature Sensor Technical Specifications
| Type: | Electric | Battery Chargers |
|---|---|
| Supplier: | Samlex America |
| Weight: | 11.0 lbs |
| Charger output voltage: | 12v |
| Charger output - Amps: | 50a |
| Charging banks: | 2 |
| Mobile: | No |
| Charger Input - Voltage: | 120/240v |
| Product Manual: | Download PDF |
| Product brochure: | Download PDF |
| Shipping Weight: | 11.0 lbs |
|---|---|
| Box Sizes: | 6.00 (h) x 11.00 (w) x 17.00 (w) |
| Cubic feet: | 1122.0 |
| Returnable: | Yes |
| P65: | Yes |
- Samlex 450W Modified Sine Wave Inverter - 12V
- Samlex 40A battery protection
- Samlex 40A Battery Charger - 24V - 2 Bank - 3 Stage with DIP Switch and Terminals - Includes Temperature Sensor
- Samlex 400A Inverter Installation Kit for 3500W Inverter
- Samlex 400A class T replacement fuse
- Samlex 400 A Class T Fuse Block Accessory Kit
- Samlex 4000W Pure Sine Wave Inverter/Charger - 24V
