Seastar AP1233 Pump Type 2 12 V 110 Cu In/Min Marine Navigation & Instruments

The SeaStar Autopilot pump is a fixed flow reversible type assembly that uses an internal hydraulic gear pump, producing very little vibration or noise. It comes in 12 and 24 volt configurations, as well as two different pump sizes. It can be used as a stand-alone pilot pump or can be mounted on a previously installed SeaStar Power Assist unit and can avoid the need to penetrate hydraulic lines.

SeaStar AP1233 Attributes

Voltage input: 12 Volt
Maximum pressure rating: 1,000 PSI
Ampere rating: 5 A to 11 A
Cylinder capacity: 12.5 to 21 inches cubes
Flow rate: 100 cubic inches per minute
Line length: 24 feet

SeaStar AP1233 Features and benefits

Compact design
Low Power Consumption
Superior Corrosion Resistance
Quiet Operation
Standalone or Mounts on UnitSeaStar power assist system
ABYC, CE and J1171 compliant
Long life DC motor
Limited to 1 yearEar warranty

Bulletins technical SeaStar AP1233

pas1-SeaStar-Autopilot_Pump.pdf

The Seastar Autopilot pump is a fixed flow, reversible pump unit that uses an internal hydraulic gear pump , producing very little vibration or noise. It comes in two different pump sizes (type 1 and type 2).

AUTOMATIC PILOT? KEY FEATURES

Long life DC motor (i.e. long life brushes)
Design compact
Simplified installation
Low energy consumption
ABYC, CE and J1171 compliant
Superior corrosion resistance
Quiet operation
All travel mounting brackets included


Voltage		12 volts

Fittings		Compatible with the Seastar Hose standard - 9/16" X 24 UNEF thread

About details
Length		24"
Gauge		12 awg
Connector		None - Bare slopes

Oil compatibility		Seastar Steering Fluid (MIL 5606)

Weight		4.9 lb (2.2 kg)

Pump Sizes		Type 1: 60 inches3 /min (without loading)
		Type 2: 100 cfm (no load)

Maximum pressure		1000 psi

Typical current consumption		12V Type 1: 4? 8 amps
(depending on application)		12V Type 2: 5? 11 amps



RAM capacity
Type 1		4.9 inches³ - 14 in³
Type 2		14 inches³ - 21 inches³

The Seastar Autopilot pump is a fixed flow reversible pump group using an internal hydraulic gear pump, which generates little vibration or noise. It offers two...
PRODUCT ID: 1002159
SKU: NVN-1002159.
CSKU: CWR-1002159
REWRITE: 1013270-seastar-ap1233-type-2-pump-12v-110
MPN: AP1233
UPC: 731957898005
ASIN: B009YLDT5Y
WSKU : TELAP1233
SSKU:
KSKU: S5RAP1233
GSKU:
MSKU: AP-1233
LSKU: 1-AP1233
NAME: Seastar AP1233 Type 2 Pump 12 V 110 Cu In/ Min
NAME_EX:
PTITLE: Seastar AP1233 Type 2 pumps 12 V 110 Cu In/Min
TYPE: Marine navigation and instruments | Autopilots
SELLER: Seaview

Standard Horizon - GX1800G Fixed Mount VHF with GPS - Black

Gtags:

Weather band
Mobile

GSpecs:

Seastar AP1233 Type 2 12V 110 Cu In/Min Pump Product Description

The SeaStar Autopilot pump is a fixed flow reversible type assembly that uses an internal hydraulic gear pump, producing very little vibration or noise. It comes in 12 and 24 volt configurations, as well as two different pump sizes. It can be used as a standalone pilot pump or can be mounted on a previously installed SeaStar Power Assist unit and can avoid the need to penetrate hydraulic lines

SeaStar AP1233 Attributes

Input Voltage: 12 Volts
Maximum Pressure Rating: 1000 PSI
Rated Ampere: 5 A to 11 A
Cylinder Capacity: 12.5 TB 21 cubic inches
Throughput: 100 cubic inches per minute
Wire length: 24 feet

SeaStar AP1233 Features and Benefits

Compact Design
Low power consumption
Superior corrosion resistance
Quiet operation
Stand-alone or mounts to SeaStar power assist unit
ABYC, CE and J1171 compliant
Long-life DC motor
One Year Limited Warranty

SeaStar AP1233 Technical Bulletins

pas1 -SeaStar-Autopilot_Pump.pdf

The Seastar Autopilot pump is a fixed flow reversible pump assembly that uses an internal hydraulic gear pump, producing very little vibration or noise. It comes in two different pump sizes (type 1 and type 2).

AUTOMATIC PILOT? KEY FEATURES

Long life DC motor (i.e. long life brushes)
Design compact
Simplified installation
Low energy consumption
ABYC, CE and J1171 compliant
Superior corrosion resistance
Operation silencer
All displacement mounting brackets included

Voltage

12 volts

Connections

Compatible with standard Seastar hose - 9/16" X 24 UNEF thread

Thread details

Length

24"

Gauge

12 awg

Connector

None - Bare wires

Oil compatibility

Seastar Steering Fluid (MIL 5606)

Weight

4.9 pounds (2.2 kg)

Pump sizes

Type 1: 60 cfm (no load)

Type 2: 100 cfm (no load)

Maximum Pressure

1000 psi

Typical current consumption

12V Type 1: 4? 8 amps

(Depending on application)

12V Type 2: 5? 11 amps

RAM Capacity

Type 1

4.9 inches³ - 14 inches³

Type 2

14 in³ - 21 in³

The Seastar AuThe topilot pump is a fixed flow reversible pump assembly using an internal gear hydraulic pump, which generates little vibration or noise It offers two...

Frequently asked questions. (FAQ) about the Seastar AP1233 Type 2 12V 110 Cu In/Min pump Who is the Seaview?
How to describe the Seastar AP1233 Type 2 12v 110 Cu In/Min pump?
What is the weight of the Seastar AP1233 Type 2 12v 110 Cu In/Min pump? product?
Who is Seaview? Working closely with all major electronics manufacturers, Seaview offers an innovative range of high quality products for power and sail boats, pleasure and commercial Seaview added a process.hard anodizing before powder coating to ensure superior durability and corrosion protection. Seaview is dedicated to providing quality products with the highest level of service in the industry. How to describe the Seastar AP1233 Type 2 12V 110 Cu In/Min Pump? The Seastar Autopilot pump is a fixed flow reversible pump assembly using an internal hydraulic gear pump, which generates little vibration or noise. It offers two...

The Seastar Autopilot pump is a reversible fixed flow pump assembly that uses an internal hydraulic gear pump, producing very little vibration or noise.
It is offered in two different pump sizes (type 1 and type 2).
AUTOPILOT? KEY FEATURES: Longer life, less energy consumption, low maintenance costs and simple installation process.

The Seastar Autopilot pump isa fixed flow reversible pump assembly that uses a hydraulic gear pump, producing very little vibration or noise.
The autopilot was designed for use in low pressure applications such as water supply and irrigation systems.
It is offered in two different pump sizes (type 1 and type 2).
AUTOMATIC PILOT? KEY FEATURES Longer lifespan than a traditional motorized system, less noise and vibration than a traditional motorized system, simple installation process.

What is the weight of the product? 6

The Seastar Autopilot pump is a fixed flow reversible pump assembly that uses an internal hydraulic gear pump, producing very little vibration or noise.
It is offered in two different pump sizes (type 1 and type 2).
AUTOMATIC PILOT? KEY FEATURES: Durationlonger life, reduced energy consumption, low maintenance costs and simple installation process.
The Seastar Autopilot pump is a fixed-flow reversible pump assembly that uses an internal hydraulic gear pump , producing very little vibration or noise.
The autopilot has been designed for use in low pressure applications such as water supply and irrigation systems.
It is offered in two different pump sizes (type 1 and type 1). type 2).
AUTOMATIC PILOT? KEY FEATURES Longer life than a traditional motorized system, less noise and vibration than a traditional motorized system, simple installation process.
The Seastar Autopilot pump is a reversible pump group fixed flow rate which uses an internal hydraulic gear pump, producing very little vibration or noise.
It is offered en two different pump sizes (type 1 and type 2).
AUTOMATIC PILOT? KEY FEATURES: Durable and long lasting; Reversible flow; Fixed Flow
The Seastar Autopilot pump is a fixed flow reversible pump assembly that uses an internal hydraulic gear pump, producing very little vibration or noise.
It is offered in two different pumps. sizes (type 1 and type 2).
AUTOMATIC PILOT? KEY FEATURES: Long life and reliability with minimal maintenance required.

Save $57 when you purchase the Seastar AP1233 Type 2 12v 110 Cu In/Min Pump for only $602 from NVN Marine! Same day dispatch before 3 p.m. Seastar AP1233 Type 2 Pump 12V 110Cu In/Min Technical Specifications

Type:	Navigation and Marine Instruments \| Autopilots
Supplier:	Horizon standard
Weight:	6.0 lbs

Seastar AP1233 Type 2 Pump 12v 110 Cu In/Min User ReviewsSeastar AP1233 Type 2 Pump 12v 110 Cu In/Min Shipping & Returns

Shipping Weight:	6.0 lbs
Box sizes:	1.00 ( h) x 1.00 (l) x 1.00 (l)
Cubic feet:	1.0
Returnable:	Yes
USPS First Class :	Yes
P65:	Yes