Seaview 24V electrically operated hinge compatible with Seaview brackets ending in M1 and M2 Boat Outfitting

24V electrically operated hinge for Seaview mounts ending in M1 and M2

The Seaview SVEHB1 electrically operated hinge fits all 7" Seaview mounts x 7" and 10" x 10" mounting base plates. Some electronics can also be mounted directly to the hinge plates if necessary (contact Seaview for direct mounting of electronics). Professionally designed to raise and lower marine electronics with the push of a button. This unique electrically operated hinge can accommodate small single Seaview mounts up to large double mounts fully loaded with marine electronics. This hinge measures 5-9/16" high x 13" wide x 20-1/2" long. It will pivot approximately 93 degrees, leaving the hinge plate vertical to the mounting surface at approximately 11- 7/16".

This Seaview hinge is made of marine grade aluminum, manufacturede expertly for always superior quality welds. The actuator used is 24V however, 12V is an option with a conversion kit. The 24V actuator has a current draw of 10.4 amps when starting and running.lly loaded with 2248 lb-force. The hinge has a very durable finish that is unlike anything else in the industry. This is first chemically treated (for corrosion resistance), then a coat of polyester epoxy primer is applied and finished with a coat of polyester powder for a superior gloss white finish. There are two waterproof cable glands inside the hinge for waterproof cable routing. This also has a removable cover to easily service the inside of the hinge if necessary.

This actuated hinge has been used for many applications. Some examples, but not limited to: Princess 66, Navetta 48, Sunseeker 52 & 66, Absolute 58, Saber 45, Jupiter 27 and HCB Yacht 65CC.

Features:

Electrically operated hinge
Volt: 24V
Fits Seaview mounts ending in M1 and M2

24V electric hinge fits Seaview mounts , and the Seaview SVEHB1 electric hinge ending in M1 and M2 will fit all Seaview brackets with 7"x7" and 10"x10"s mounting base. Some...
PRODUCT ID: 86897
SKU: NVN-86897
CSKU: CWR-86897
REWRITE: 98008-seaview-24v-electrically-operated-hinge-suitable-for- seaview
MPN: SVEHB1
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Seaview Electrically 24V Operated Hinge for Seaview Brackets ending in M1 and M2
NAME_EX: SEAVIEW 24V ELECTRICALLY ACTUATED HINGE
PTITLE: Seaview 24V Electrically Actuated Hinge for BracketsSeaview ending with M1 and M2
TYPE: Boat layout | Radar/TV Mounts
SUPPLIER: Seaview
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES

Gtags:

GSpecs:

Seaview 24V electrically operated hinge for Seaview brackets ending in M1 and M2 Product description

24V electrically operated hinge for Seaview brackets ending in M1 and M2

The Seaview SVEHB1 power hinge will fit all Seaview brackets with 7"x7" and 10"x10" mounting base plates. Some electronics can also be mounted directly to the hinge plates if necessary (contact Seaview for direct mounting of electronics). Professionally designed to raise and lower marine electronics with the push of a button. This unique electrically operated hinge can accommodate small single Seaview mounts up to large double mounts fully loaded with marine electronics. This hinge measures 5-9/16" high x 13" wide x 20-1/2" long. It will pivot approximately 93 degrees, leaving the hinge plate vertical to the hinge.has mounting surface approximately 11-7/16".

This Seaview hinge is made of marine grade aluminum, expertly manufactured for consistently superior welds. The actuator used is 24V however, the 12V is an option with a conversion kit. The 24V actuator has a current draw of 10.4 amps when starting and when fully loaded, with a force of 2,248 pounds. a very durable finish that is unlike anything else in the industry. It is first chemically treated (for corrosion resistance) and then a coat of epoxy polyester primer is applied. and finished with a polyester powder coat for a superior gloss white finish. There are two waterproof cable glands inside the hinge for waterproof cable routing. This also has a removable cover for easy maintenance. inside the hinge if necessary.

This hinge hasctioned has been used for many applications. Some examples, but not limited to: Princess 66, Navetta 48, Sunseeker 52 & 66, Absolute 58, Saber 45, Jupiter 27 and HCB Yacht 65CC.

Features:

Electrically operated hinge
Volt: 24V
Fits Seaview brackets ending in M1 and M2

24V electric hinge fits Seaview mounts and SeaviewThe SVEHB1 electric hinge ending in M1 and M2 fits all Seaview mounts with 7"x7" and 10"x10" mounting bases. Some...

Frequently Asked Questions (FAQ) about Seaview 24V Power Hinge fits Seaview brackets ending in M1 and M2. Who is Seaview?
How to describe the Seaview 24V electrically operated hinge suitable for Seaview brackets ending in M1 and M2?
What is the product type?
Who is Seaview? Working in close coWorking with all major electronics manufacturers, Seaview offers an innovative range of high quality products for power and sail boats, recreational and commercial. Seaview has added a hard anodizing process before powder coating to ensure superior durability and corrosion protection. Seaview is dedicated to providing quality products with the highest level of service in the industry. How to describe the Seaview 24V Power Hinge compatible with Seaview brackets ending in M1 and M2? The 24V electric hinge is suitable for Seaview mounts, and the Seaview SVEHB1 electric hinge ending in M1 and M2 will fit all Seaview mounts. 7"x7" and 10" x10" mounting bases. Some...

The Seaview SVEHB1 is the perfect solution for an electric actuator.
With a 24V DC power supply it will work on allSeaview mounts with 7"x7" and 10"x10" mounting base plates.
It's also compatible with most electronic devices, so you can 'use as you wish.

The Seaview SVEHB1 electrically operated hinge fits all Seaview brackets with 7"x7" and 10"x10" mounting base plates.
Some electronic devices can also be installed inside the hinge.
The high quality of the hinge is ensured by the use of stainless steel and epoxy powder coating.

Integrate perfectly with your Seaview supports available to make your life easier.
Available in two sizes - 7"x7" and 10"x10" - so you can choose the one that best suits your needs.
Works with all electronic devices, so you don't have to worry about compatibility issues.

Whatis the type of product? Miscellaneous

The Seaview SVEHB1 is the perfect solution for an electric actuator.
With a 24V DC power supply, it will work on all Seaview 7"x7" and 10"x10" plate racks mounting base.
It's also compatible with most electronic devices, so you can use it however you like.
The Seaview SVEHB1 power hinge will fit Fits all 7" x 7" Seaview brackets and 10"x10" mounting base plates.
Some electronic devices may also be installed inside the hinge.
The high quality of the hinge is ensured by its use of stainless steel and epoxy. powder coated.
Integrates seamlessly with your existing Seaview mounts to make your life easier.
Comes in two sizes - 7"x7" and 10"x10" - so you you can choose the one that best suits your needs.
Works withec all electronic devices, so you don't have to worry about compatibility issues.
Works with all electronic devices, so you don't have to worry about compatibility issues.
Works with all electronic devices, so you don't have to worry about compatibility issues.
Works with all electronic devices, so you don't have to worry about compatibility issues.
li>

Save $1,080 when you purchase the Seaview 24V Power Hinge Compatible with Seaview Brackets Ending in M1 and M2 for just $4,320 NVN Marine! Fast, free same-day delivery before 3 p.m. Seaview 24V Electrically Operated Hinge Compatible with Seaview Brackets Ending in M1 and M2 Technical Specifications

Type:	Boat Equipment \| Radar/TV mounts
Supplier:	Sea view
Type:	Miscellaneous

Seaview 24V Power Hinge Fits Seaview Brackets Ending M1 and M2 Users ReviewsSeaview 24V Power Hinge Fits Seaview Brackets Ending M1 & M2 Shipping & Return

For detailed shipping terms, please see our shipping policy and you can find our return & refund policy here.