SI-TEX SP-120 color system with steering feedback without drive unit Marine Navigation & Instruments

SP-120 color system with steering feedback without drive unit

Features:

The SI-TEX SP-120C is an autopilot designed for hydraulic steering, mechanical steering and solenoid control.
Does not require a separate junction box, everything simply connects to the 'rear of the control head
This autopilot is ideal for small vessels under 38 feet
The autopilot can operate either in virtual rudder feedback mode in the case of outboard motors, or a separate rudder feedback unit can be added for inboard vessels.
The SP-120C displays the actual compass heading and the selected heading simultaneously, as well as than rudder angle.
Compact, splash-proof 4.1" x 4.1" control head with large, easy-to-read color LCD display
Extremely easy to select the capess, to be used and configured as you wish, thanks to new user-friendly software
The high-performance 9-axis gyroscope provides the autopilot with excellent steering response.
The pilot Automatic uses GPS Speed Above Ground (SOG) and Course Over Ground (COG) input to
improve performance
Interface NMEA-0183 GPS accepts input from most chartplotters to navigate to waypoints and routes
NMEA-0183 output of 10kHz compass heading for interfacing with MFD with map/radar overlay
Autopilot steering modes:
Manual (power steering)
Auto (pilot maintains selected magnetic heading)
GPS (Heads towards a waypoint or routes when interfaced with GPS)
Wind (Heads towards the wind when connected to the GPS sensor) wind to install themsailboats)
Protected by a 2-year SI-TEX warranty

Specifications:

Waterproof: IPX6
Control head dimensions: 110 mm L x 110 mm W
Power supply VOLTAGE: 12/24 Volts DC
Display Color LCD
Constant compass heading indicator and rudder angle indicator
Current consumption: 0.5 amps at 12V DC in standby mode
Maximum Inverter Output Current 15A
Operating Temperature: -10ºC to +55ºC
Data Connections: NMEA-0183 GPS input, NMEA-compass heading output 0183 10 kHz
Heading detection <1 degree

Package includes:

Heading head SI-TEX SP-120C color LCD autopilot control
NMEA interface cables
9-axis electronic gyro compass
Head sun cover ordering
Product manual
Mounting screws

The SI-TEX SP120 color system without drive unit (without servo feedback) is brand new. Driverless SI-TEX SP120 Color System Driverless SITEX SP120 Driverless Color System...
PRODUCT ID: 84458
SKU: NVN-84458
CSKU: CWR-84458
REWRITE: 95569-si -tex-sp-120-color-system-w-rudder-feedback-w-o
MPN: SP120C-RF-1
UPC:
ASIN:
WSKU: SITSP120CRF1
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: SI-TEX SP-120 Color System with rudder feedback without drive unit
EX_NAME: SITEX SP120 SYSTEM COLOR WITH RUDDER FEEDBACK WITHOUT DRIVE UNIT
PTITLE: SI-TEX SP- 120 color system with rudder feedback without drive unit
TYPE: Navigation and Marine Instruments | Autopilots
SELLER: SI-TEX
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES> POWERWATER STEERING PARTS>POWERWATER STEERING CABLES Si-Tex Sp120 Color System with Rudder Return without Drive Unit [Sp120C-Rf-1]
Category Amazon:
Gtags:

GSpecs:

SI-TEX SP-120 color system with steering feedback without drive unit Product description

SP-120 color system with steering feedback without drive unit

Features:

SI-TEX SP-120C is an autopilot designed for hydraulic steering, mechanical steering and solenoid control
Does not require a separate junction box, everything simply connects to the rear of the control head
This autopilot is ideal for small vessels under 38'
The autopilot can operate in virtual rudder feedback mode in the case of outboards or a separate rudder feedback unit can be added for inboard vessels.
The SP -120C simultaneously displays actual compass heading and selected heading, as well as rudder angle displays
Compact 4.1" x 4.1" splash-proof control heades with large, easy-to-read color LCD display
Extremely easy to select titles, operate and configure as you wish, with new user-friendly software
High performanceOrmance 9 Axis Rate Gyro Compass provides the autopilot with excellent steering response
The autopilot uses GPS speed above ground (SOG) and course above ground (COG) input to
improve performance
The NMEA-0183 GPS interface accepts input from most chartplotters to navigate to waypoints and routes
NMEA-0183 compass heading output at 10kHz for interfacing with MFDs with chart/radar overlay
Autopilot steering modes:
Manual (steering assisted)
Auto (pilot maintains selected magnetic heading)
GPS (steers to waypoint or routes when interfaced with GPS)
Frit (directs into the wind when interfaced with the wind sensor for sailboat installations)
Protected by a 2-year SI-TEX warranty

Specifications:

Waterproof: IPX6
Control head dimensions: 110mm L x 110mm W
Power Supply VOLTAGE: 12/24 Volts DC
Color LCD display
Constant compass heading indicator and rudder angleIndicator
Current consumption: 0.5A at 12V DC in standby mode
Maximum drive output current 15A
Operating temperature: -10ºC to +55ºC
Data Connections: NMEA-0183 GPS input, NMEA-0183 10kHz compass heading output
Heading detection <1 degree

Package includes :

Package includes:

SI-TEX SP-120C Color LCD Autopilot Control Head
NMEA interface cables
Electronic gyro compass9-axis ronic
Control head sun cover
Product manual
Mounting screws

The SI-TEX SP120 color system without drive unit (without servo feedback) is brand new. Driverless SI-TEX SP120 Color System Driverless SITEX SP120 Driverless Color System...

Frequently Asked Questions (FAQ) About SI-TEX SP-120 Color System with Driveless Direction Feedback Unit Who is SI-TEX?
How to describe the SI-TEX SP-120 color system with direction feedback without drive unit?
Who is SI-TEX? There's an old saying: "If it ain't broke, don't fix it!" » This perfectly sums up the SI-TEX philosophy. With solid products built in the SI-TEX tradition of simplicity, performance and reliability, as well as friendly and responsive technical support, the SI-TEX business b> has continued to grow. SI-TEX is committed to developing new productsbased on how customers actually use their boats, rather than just cramming in a bunch of expensive bells and whistles for marketing's sake. How to describe SI- TEX SP-120 color system with rudder feedback without drive unit? The SI-TEX SP120 color system without drive unit (without servo feedback) is completely new. SI-TEX Driverless SP120 Color System Driverless SITEX SP120 Color System Driverless...

The SP-120C is a complete autopilot system that can be used in a variety of of applications. It is designed to be simple and easy to install, while providing the reliability needed for hydraulics. electronic steering, mechanical steering or solenoid control.

The SI -TEXSP-120C is a perfect autopilot for hydraulic steering, mechanical steering or solenoid control. It does not require a junction boxn separate, but fits everything into one unit.

Save $779 when you purchase the SI-TEX SP Color System -120 with Rudder Return without Drive Unitfor only $1919 from NVN Marine! Free same day delivery before 3 p.m. SI-TEX SP-120 color system with rudder feedback without drive unit Technical specifications

Type:	Marine navigation and instruments \| Autopilots
Supplier:	SI-TEX
Product brochure:	Download PDF

SI-TEX SP-120 color system with feedback of rudder w/o Drive Units User ReviewsSI-TEXSP-120 color system with steering feedback without drive unit Shipping & Return

For detailed shipping terms, please see our shipping policy and you canFind our returns and refund policy here.