Sika Sikaflex 295 UV - Black - 10 oz Tube with Nozzle Boat Outfitting

Sikaflex 295 UV - Black - 10 oz tube with nozzle

Exterior sealant and direct glazing adhesive for organic glass in marine applications. Sikaflex-295 UV is a one-part, paste-like polyurethane adhesive that cures when exposed to atmospheric moisture. It is suitable for interior and exterior sealing applications and bonding of organic glass in the maritime sector. Sikaflex-295 UV meets the requirements set by the International Maritime Organization (IMO).

Features:

Excellent application properties
Resistant to aging and weathering
Suitable for organic glasses

Areas of application

Sikaflex-295 UV has been specially developed for the maritime industry, where It is used to bond and seal plastic glazing materials in boats and ships. Due to its excellentte weather resistance, this product can also be used to seal joints in exposed areas. Suitable substrates are aluminum (bright or anodized), GRP (polyester resin), stainless steel, wood, two-component coatings and plastic glazing (PC, PMMA). Seek advice from the manufacturer and carry out tests on the original substrates before using Sikaflex-295 UV on materials prone to stress cracking. This product is only suitable for experienced professional users. Testing with substrates and real-world conditions should be performed to ensure adhesion and material compatibility.

Product Benefits:

Excellent application properties
Resistant to aging and weathering
Suitable for organic glasses
Approved for the OEM market
Approved Wheelmark

Surface preparation:

Surfaces must be clean, dry and free of grease, oil, dust and contaminants. The surface treatment depends on the specific nature of the supports and is crucial for a lasting bond. Surface preparation suggestions can be found in the current edition of the appropriate Sika Pretreatment Chart. Please note that these suggestions are based on experience and should in any case be verified by testing on original media.

Application:

Sikaflex-295 UV can be used between 10°C and 35°C (climate and product) but changes Responsiveness and application properties must be taken into account. The optimum temperature for the substrate and sealant is between 15°C and 25°C.
Remember that viscosity increases at low temperatures. For easy application, condition adhesive at room temperature before use. To ensure uniform thicknessof bonding, it is recommended to apply the adhesive in the form of a triangular bead.

Tooling and finishing

Tooling and finishing must be carried out within the skin time of the product. It is recommended to use Sika Tooling Agent N. Other finishing agents should be tested for suitability and compatibility before use.

Removal

Uncured Sikaflex-295 UV can be removed from tools and equipment with Sika Remover-208 or other suitable solvent. Once hardened, the material can only be removed mechanically. Hands and exposed skin should be washed immediately using Sika Cleaner-350H wipes or a suitable industrial hand cleaner and water. Do not use solvents on the skin.

Overpainting

Sikaflex-295 UV can be painted before and after the skin has formed. If the painting process takes place afterf the sealant has formed a skin, adhesion can be improved by treating the joint surface with Sika Aktivator-100 or Sika Aktivator-205 before the painting process. If the paint requires a baking process (>80°C), best performance is achieved by first allowing the putty to fully harden. All paints must be tested by carrying out preliminary trials under manufacturing conditions. The elasticity of paints is generally lower than that of putties. This could lead to paint cracking in the joint area.

PRODUCT ID: 92120
SKU: NVN-92120
CSKU: CWR-92120
REWRITE: 103231-sika -sikaflex-295-uv-black
MPN: 778
UPC: 7612894009170
ASIN: B01N7EWGNU
WSKU:
SSKU:
KSKU:
GSKU :
MSKU:
LSKU:
NAME: SIKA SIKAFLEX 295 UV BLACK 10 OZ WITH NOZZLE
NAME_EX:
PTITLE: Sika Sikaflex 295 UV - Black - 10 oz tube with nozzle
TYPE: Teamboat building | Adhesives/Sealants
SUPPLIER: Sika
HARDWARE> CONSTRUCTION SUPPLIES> PROTECTIVE COATINGS & SEALANTS

Gtags:

GSpecs:

Sika Sikaflex 295 UV - Black - 10 oz tube with nozzle Product Description

Sikaflex 295 UV - Black - 10 oz tube with nozzle

Features:

Excellent application properties
Resistant to aging and weathering
Suitable for organic glasses

Areas of application

Sikaflex-295 UV has been specially developed for the maritime industry, where it is used to bond and seal v materialsplastic itrage in boats and ships. Due to its excellent weather resistance, this product can also be used to seal joints in exposed areas. Suitable substrates are aluminum (bright or anodized), GRP (polyester resin), stainless steel, wood, 2-component coatings and plastic glazing materials (PC, PMMA). Seek advice from the manufacturer and carry out tests on the original substrates before using Sikaflex-295 UV on materials prone to stress cracking. This product is only suitable for experienced professional users. Testing with substrates and real-world conditions should be performed to ensure adhesion and material compatibility.

Product Benefits:

Excellent application properties
Resistant to aging and weathering
Suitable for organic glasses
Approuveted for OEM Market
Wheelmark Approved

Surface Preparation:

Surfaces must be clean, dry and free of grease, oil, dust and contaminants. The surface treatment depends on the specific nature of the supports and is crucial for a lasting bond. Suggestions for surface preparation can be found in the current edition of the appropriate Sika pretreatment chart. Please note that these suggestions are based on experience and should in any case be verified by testing on original media.

Application:

Sikaflex-295 UV can be used between 10°C and 35°C (climate and product) but changes Responsiveness and application properties must be taken into account. The optimum temperature for the substrate and sealant is between 15°C and 25°C.
Remember that viscosity increases at low temperatures. For an appEasy ication, condition the adhesive at room temperature before use. To guarantee a uniform thickness of the bonding, it is recommended to apply the adhesive in the form of a triangular bead.

Tooling and finishing

Removal

Overpainting

Sikaflex-295 UV can be painted before and after skin formation. If the painting process takes place after the sealant has formed a skin, adhesion can be improved by treating the joint surface with Sika Aktivator-100 or Sika Aktivator-205 before the painting process. If the paint requires a baking process (>80°C), best performance is achieved by first allowing the putty to fully harden. All paints must be tested by carrying out preliminary trials under manufacturing conditions. ElastaneThe effectiveness of paints is generally lower than that of sealants. This could lead to paint cracking in the joint area.

Frequently Asked Questions (FAQ) About SIKA SIKAFLEX 295 UV BLACK 10 OZ WITH NOZZLE Who is Sika?
Who is Sika? Sika is a leading supplier of specialty chemicals and industrial materials forconstruction and industrial markets, including transportation, marine and automotive. Its technologies focus on waterproofing, bonding, cushioning, reinforcement and protection. Sika product lines include roofing, concrete admixtures, specialty mortars, epoxies, structural reinforcement systems, industrial flooring, sealants, adhesives, specialized acoustic and reinforcement materials.

Save $5 on the purchase of Sika Sikaflex 295 UV - Black - 10 oz tube with nozzle for only 19 $ from NVN Marine! Same day dispatch before 3 p.m. Sika Sikaflex 295 UV - Black - 10oz Tube with Nozzle Technical Specifications

Type:	Boat Equipment \| Adhesives/Sealants
Supplier:	Sika
Weight:	0.3 lbs

Sika Sikaflex 295 UV - Black - 10 oz Tube with Nozzle User ReviewsSika Sikaflex 295 UV - Black - 10 oz Tube with Nozzle Shipping & Returns

Shipping Weight:	0.3 lbs
Box Sizes:	2.00 (h) x 5.00 (w) x 9.00 (l)
Cubic feet:	90.0
Returnable:	Yes
USPS First Class:	Yes

For detailed shipping terms , please review our Shipping Policy and you can find our Return & Refund Policy here.