Name: T-H Marine ATLAS 10" Polished Recessed Hydraulic Jack Plate
SKU: T-H-Marine-ATLAS-10--Polished--2646771
Price: 108 USD
Availability: InStock

T-H Marine ATLAS 10" Polished Recessed Hydraulic Jack Plate Boat Outfitting

ATLAS™ 10" Polished Recessed Hydraulic Jack Plate

Designed for engines up to 300 hp or up to 625 pounds dry weight.

5 REASONS WHY YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC CYLINDER PLATE

ATLAS™ is truly the world's best hydraulic cylinder plate
- ATLAS™ is truly the world's best hydraulic cylinder plate
  - li>
  - ATLAS™ is factory installed by more boat manufacturers than any other plate
  - ATLAS™ is used by more professional fishermen than any other hydraulic ram plate
  - ATLAS™ is the world's best-selling hydraulic plate - sold and serviced by over 100,000 outlets
  - The ATLAS™ hydraulic actuator is manufactured in the USA while our competitors come from China
  6 WAYS FOR THE ATLAS™ TO CHANGE THE FOREVER FLAT HYDRAULIC JACK
  - ATLAS™ is manufactured by T-H Marine/CMC, who were the FIRST to offer an actuatorr inside the jack plate - the competition has copied
  - ATLAS ™ was the first plate to offer pre-drilling for shallow water anchors - the competition has copied
  - ATLAS™ was the first and only plate that did not require regular grease lubrication - competition design can't do that.
  - ATLAS™ was the first plate to include a heavy-duty safety cable to protect boaters from engine entry into the cockpit in the event of a failure
  - ATLAS™ was the first plate to offer very simple actuator replacement in the field
  - ATLAS™ was the first major development in hydraulic cylinder plates in over a decade, spurring the improvement of hydraulic cylinder plates
  This This product may expose you to dangerouss chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,
  
  Atlas roof-mounted independent hydraulic pump system (2,500 psi), designed for powerful outboard systems Today, even the heaviest 4-strokes. No need to install tanks or pipelines. From bottom to top in less than 8 seconds. Innovative rod lift and slot design - trouble-free lifting action. The wear resistance of high-tech engineering polymer rods is 6 times that of steel. Easily disassemble the 2 needle pump. Fast maintenance.
  
  Atlas roof-mounted independent hydraulic pump system (2,500 psi), designed for today's powerful outboard systems, even the heaviest four-stroke systems. No need to install tanks or pipelines. From bas up in less than 8 seconds. Innovative rod lift and groove design, trouble-free lifting action. The wear resistance of high-tech engineering polymer rods is 6 times that of steel. Easily disassemble the 2 needle pump. Quick maintenance.
  PRODUCT ID: 81664
  SKU: NVN-81664
  CSKU: CWR-81664
  REWRITE: 92775-t-h-marine-atlas-10-set-back-hydraulic
  MPN: AHJ- 10V-DP
  UPC: 733572069556
  ASIN: B0085H7WDS
  WSKU: THMAHJ10VDP
  SSKU:
  NAME: T-H MARINE ATLAS 10" STD RETRACTED HYDRAULIC JACK PLATE
  PTILER: T-H Marine ATLAS™ Polished 10" Recessed Hydraulic Jack Plate
  TYPE: Boat Equipment -> Jack Plates
  SELLER: T-H Marine Supplies
  VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS AND ACCESSORIES
  Sports
  
  TH Marine Atlas 10" Jack Plate Standard Hydraulic Polished
  Sports
  Gtags:
  
  T-H Marine
  
  Jack
  
  Hydraulic
  
  GSpecs:
  
  T-H Marine ATLAS™ Polished 10" Recessed Hydraulic Cylinder Plate Product Description
  Polished ATLAS™ 10" Recessed Hydraulic Cylinder Plate
  
  Designed for engines up to 'to 300 hp or up to 625 pounds dry weight.
  
  5 REASONS WHY CHOOSE ATLAS™ HYDRAULIC CYLINDER PLATE
  - ATLAS™ is truly the best hydraulic cylinder plate in the world
  - ATLAS™ is factory installed by more boat manufacturers than any other plate
  - ATLAS™ is used by more professional fishermen than any other hydraulic ram plate
  - ATLAS™ is the #1 selling hydraulic plate in the world – sold and serviced by more outlets
  - ATLAS™ hydraulic actuator is made in the USA, while our competitors are from China
  6 WAYS THE ATLAS™ CHANGES HYDRAULIC JACK PLATES FOREVER
  - ATLAS™ is fabriced by T-H Marine/CMC, which was the FIRST to offer an actuator inside the jack plate - the competition copied
  - ATLAS™ was the first plate to offer pre-drilling for shallow water anchors - the competition copied
  - ATLAS™ was the first and only plate that did not require regular grease lubrication - the competition's design can't do that
  - ATLAS™ was the first plate to include a heavy-duty safety cable to protect boaters from engine entry into the cockpit in the event of a breakdown
  - ATLAS™ was the first plate to offer very simple actuator replacement in the field
  - ATLAS™ was the first major development in the field of hydraulic cylinder plates in over a decade – driving the improvement of actuator plates hydraulic cylinder
  This product can expose you to chemicals which are knownrecommended by the State of California to cause cancer, birth defects, or other reproductive harm. For more information,
  
  Atlas roof-mounted independent hydraulic pump system (2,500 psi), designed for powerful outboard systems Today, even the heaviest 4-strokes. No need to install tanks or pipelines. From robotTom to the top in less than 8 seconds. Innovative rod lift and slot design - trouble-free lifting action. The wear resistance of high-tech engineering polymer rods is 6 times that of steel. Easily disassemble the 2 needle pump. Fast maintenance.
  
  Atlas roof-mounted independent hydraulic pump system (2,500 psi), designed for today's powerful outboard systems, even the heaviest four-stroke systems. No need to install tanks or pipelines. From bottom to topin less than 8 seconds. Innovative rod lift and groove design, trouble-free lifting action. The wear resistance of high-tech engineering polymer rods is 6 times that of steel. Easily disassemble the 2 needle pump. Quick maintenance.
  
  T-H Marine ATLAS™ Polished 10" Recessed Hydraulic Ram Plate Related ProductsT-H Marine Replacement Relay Harness for Hydraulic Ram Plates 2014+
  T-H Marine ATLAS™ Hydraulic Gauge Kit f /6", ATLAS™ jack plate 10", 12" and 14" - Black Bezel
  T-H Marine ATLAS™ hydraulic gauge kit f/6", 10", 12" and 14" ATLAS™ jack plates - Stainless Steel Bezel
  T-H Marine Steering Trim Control Unit
  T-H Marine Transom Trim Control Push Button Trim Switch
  
  Frequently Asked Questions Questions (FAQ) about T-H Marine ATLAS™ Polished 10" Recessed Hydraulic Cylinder Plate Who is T-H Marine Supplies?
  How Describe the T-H Marine ATLAS™ 10" Recessed Hydraulic Jack Plate Polished?
  Who is T-H Marine Supplies? T-H Marine manufactures thousands of products in many categories, including jack stands outboard motor, outboard tilt and trim, access hatches, deck plates, cover locks, deck fittings, livewell ventilation, plumbing fittings, battery trays, fishing rod holders, boat lights, rigging accessories, trolling motor accessories, pontoon boat parts and general boat accessories. removal T-H Marine ATLAS™ 10" polished? Roof-independent hydraulic pump system (2,500 psi), designed for today's powerful outboard systems, even the heaviest four-stroke systems. No need to install tanks or pipelines. From bottom to top in lesse 8 seconds. Innovative rod lift and groove design, trouble-free lifting action. The wear resistance of high-tech engineering polymer rods is 6 times that of steel. Easily disassemble the 2 needle pump. Quick Service.
  - The Atlas 10" Recessed Hydraulic Ram Plate is designed for engines up to 300 hp or up to 625 pounds dry weight.
  - The plate Atlas 10" Recessed Hydraulic Jack Plate is polished for a sleek look
  - The Atlas 10" Recessed Hydraulic Jack Plate includes 5 reasons why you should choose the Atlas Hydraulic Jack Plate
  - A fully polished finish that will look good on any engine
  - Designed for engines up to 300 hp or up to 625 lbs of dry weight
  - 5 reasons why you should choose the ATLAS™ hydraulic jack plate
  TH MarineAtl jack plate modelas 10": AHJ-10V-DPATLAS&8482; is truly the best hydraulic jack plate in the world. ATLAS&8482; is factory installed by more boat manufacturers than any other plate. ATLAS&8482; is used by more professional anglers
  
  Save $680 when you purchase the T-H Marine ATLAS™ Polished 10" Recessed Hydraulic Cylinder Plate. for only $1,459 from NVN Marine! Free same day delivery before 3 p.m. T-H Marine ATLAS™ 10" Polished Recessed Hydraulic Jack Plate Technical Specifications
  
  Type:
  Boat Equipment | Jack Plates
  
  Seller:
  T-H Marine Supplies
  
  Weight:
  69.0 lbs
  
  T-H Marine ATLAS™ 10" Polished Recessed Hydraulic Jack Plate User ReviewsT- H Marine ATLAS™ 10" Set Polished Hydraulic Jack Backplate Shipping & Returns
  
  Shipping Weight:
  69.0 lbs
  
  Box Sizes:
  13.00 (h) x 19.00 (w) x 21.00 (w)
  
  Cubic Feet:
  5187.0
  
  Returnable:
  Yes
  
  P65:
  Yes
  
  For detailed shipping please see our shipping policy and you can find our return and refund policy here.

Type:	Boat Equipment \| Jack Plates
Seller:	T-H Marine Supplies
Weight:	69.0 lbs

Shipping Weight:	69.0 lbs
Box Sizes:	13.00 (h) x 19.00 (w) x 21.00 (w)
Cubic Feet:	5187.0
Returnable:	Yes
P65:	Yes