T-H Marine ATLAS 8" Polished Recessed Hydraulic Jack Plate Boat Outfitting
The Atlas' revolutionary design meets the demands of today's high-performance outboards. The one-piece design, featuring the innovative Rod and Slot lifting system, will handle the stresses of the heaviest and most powerful outboards, up to 300 horsepower on the market today. The entire hydraulic system is integrated into the jack, eliminating the need to install pumps and tanks inside the transom. The all-new hydraulic unit is also fast. Lift from bottom to top in 8 seconds.
T-H Marine AHJ8VDP Attributes- Setback: 8 inches
- Hydraulic lift: 5-3/4 inches
- Total Rise: 8-1/4 inches to 9-3/4 inches
- Horsepower: 300 horsepower
- Adjustment: 7 inches vertical
- Finish: Polished
- Color: Silver
- Material: Aluminum
- With toggle switch: Yes
- With relay harness: Yes
- One-piece design
- Including innovative rod and slot lifting system
- 300 horsepower maximum
- Will handle the stresses of heaviest, most powerful outboards
- Limited Lifetime Warranty
ATLAS™ Polished 8" Recessed Hydraulic Jack Plate
Designed for engines up to 300 hp or up to 625 pounds dry weight.
5 REASONS WHY YOU SHOULD CHOOSE THE PLATE ATLAS™ HYDRAULIC JACK PLATE
- ATLAS™ is truly the world's best hydraulic jack plate
- ATLAS™ is factory installed by more boat manufacturers than any other plate
- ATLAS™ is used by more professional anglers than any other hydraulic ram plate
- ATLAS™ is the world's best-selling hydraulic plate - sold and maintained by more points of sale
- li>
- The hydraulic actuatorThe ATLAS™ is made in the USA, while our competitors are from China
6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER
- ATLAS™ is manufactured by T-H Marine/CMC, which was the FIRST to offer an actuator inside the ptard jack – the competition copied
- ATLAS ™ was the first plate to offer pre-drilling for shallow water anchors – the competition copied
- ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition's design can't do this
- ATLAS™ was the first plate to include a heavy-duty safety cable to protect boaters from engine entry into the cockpit in the event of a breakdown
- ATLAS™ was the first plate to offer very simple actuator replacement in the field
- ATLAS™ was the first major development in the field of hydraulic cylinder platesaulique for over a decade – driving improvements in hydraulic cylinder plates
This high-tech, high-speed, one-piece design uses an innovative rod-lift system and groove that can cope with the pressure exerted by the heaviest and most powerful V6 outboard engine on the market. All hydraulic devices are integrated into the jack, eliminating the need to install pumps and fuel tanks in the beam and hydraulic hoses running through the beam. High-tech engineering polymer rods have 6 times the wear resistance of steel and are made from self-lubricating materials. From top to bottom in 8 seconds, installation time is only half that of similar sockets. Handles all outboard gears, including the powerful Verado V6 engine. This high-tech, high-speed integrated design uses ainnovative rod-and-groove lifting system to cope with the pressure of the heaviest and most powerful V6 outboard engine on the market. All hydraulic devices are integrated into the jack, eliminating the need to install pumps and fuel tanks in the beam and hydraulic hoses through the beam. High-tech engineering polymer rods have 6 times the wear resistance of steel and are made from self-lubricating materials. From top to bottom in 8 seconds, installation time is only half that of similar sockets. Handles all outboard gears, including the powerful Verado V6 engine.
PRODUCT ID: 81688
SKU: NVN-81688
CSKU: CWR-81688
REWRITE: 92799-t-h-marine- atlas-8- set-back-hydraulic
MPN: AHJ-8V-DP
UPC: 733572069501
ASIN: B00546FGMC
WSKU: THMAHJ8VDP
SSKU: THM-AHJ-8V-DP
br>KSKU: T9TAHJ8VDP
br>GSKU:
MSKU:
LSKU: 232-AHJ8VDP
NAME: T-H Marine ATLAS™ Polished 8" Recessed Hydraulic Jack Plate
NAME_EX: T-H MARINE ATLAS 8" Recessed Hydraulic Jack PLATE
br>PTITLE: Recessed Hydraulic Jack Plate T-H Marine ATLAS™ 8" Polished
TYPE: Boat Equipment | Jack Plates
SELLER: T-H Marine Supplies
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
Sports
T-H Marine Hydraulic Jack Plate AHJ-8V-DP - 8 Inch Setback, Silver
TH Marine Atlas 8 Recessed Hydraulic Jack Plate Polished by Hodges Marine
Sports
Gtags:
| T-H Marine | |
| Jack | |
| Hydraulic |
GSpecs:
T-H Marine ATLAS™ Polished 8" Recessed Hydraulic Jack Plate Product Description
The revolutionary design of the Atlas meets the demands of today's high-performance outboards. The one-piece design, featuring the innovative rod and slot lift system, will handle the stresses of the heaviest and most powerful outboards, up to 300 horsepower on the market today, the entire hydraulic system is integrated jacked, eliminating the need to install pumps and tanks inside the transom. The all-new hydraulic unit also lifts quickly from the bottom to the top. high in 8 seconds.
Attributes T-H Marine AHJ8VDP- Recoil: 8 inches
- Hydraulic Lift: 5-3/4 inches
- Total Lift: 8-1/4 inches Up to 9-3/4 inches
- Power: 300 horsepower
- Adjustment: 7 inches vertical
- Finish: Polished
- Color: Silver
- Material: Aluminium
- With toggle switch: Yes
- With relay harness: Yes
- One-piece design
- Featuring the innovative rod lift and slot system
- 300 maximum horsepower
- li>
- Will handle the stresses of the heaviest and most powerful outboards
- Limited lifetime warranty
ATLAS™ 8" Hydraulic Recessed Polished Jack Plate
Designed for engines up to 300 hp or up to 625 pounds dry weight.
5 REASONS WHY YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE
- ATLAS™ is truly the best hydraulic jack platedraulique in the world
- ATLAS™ is factory installed by more boat manufacturers than any other plate
- ATLAS™ is used by more professional anglers than any other plate hydraulic actuator
- ATLAS™ is the world's best-selling hydraulic plate – sold and serviced by more outlets
- ATLAS™ hydraulic actuator is manufactured in the United States -United States, while our competitors come from China
6 WAYS THE ATLAS™ CAN CHANGE HYDRAULIC JACK PLATES FOREVER
- ATLAS™ is manufactured by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
- ATLAS™ was the first plate to offer pre-drilling for shallow water anchors – the competition copied
- ATLAS™ was the first and only plate that did not require regular pre-drilling grease lubrication -the competition's design can't do this
- ATLAS™ was the first plate to include a heavy-duty safety cable to protect boaters from engine entry into the cockpit in the event of a breakdown
- ATLAS™ was the first to offer very simple actuator replacement in the field
- ATLAS™ was the first major development in the field of hydraulic cylinder plates in over 'a decade driving the improvement of hydraulic cylinder plates
This high-tech, high-speed one-piece design uses an innovative rod-and-groove lifting system that can make against the pressure exerted by the heaviest and most powerful V6 outboard engine on the market. the market. All hydraulic devices are integrated into the jack, eliminating the need to install pumps and fuel tanks in the beam and hydraulic hoses running through the beam. Polymer rodss high-tech techniques have 6 times greater wear resistance than steel and are made from self-lubricating materials. From top to bottom in 8 seconds, installation time is only half that of similar sockets. Handles all outboard gears, including the powerful Verado V6 engine. This high-tech, high-speed integrated design uses an innovative rod-and-groove lifting system to cope with the pressure of the heaviest and most powerful V6 outboard engine on the market. All hydraulic devices are integrated into the jack, eliminating the need to install pumps and fuel tanks in the beam and hydraulic hoses through the beam. TopEngineering polymer rods have 6 times the wear resistance of steel and are made from self-lubricating materials. From top to bottom in 8 seconds, setup time is only half of thathim similar takes. Handles all outboard gears, including the powerful Verado V6 engine.
T-H Marine ATLAS™ Polished 8" Recessed Hydraulic Ram Plate Related ProductsT-H Marine Replacement Relay Harness for Hydraulic Ram Plates 2014+
Fair FAQ About T-H Marine ATLAS™ Polished 8" Recessed Hydraulic Cylinder Plate Who is T-H Marine Supplies? How to describe T-H Marine ATLAS™ Polished 8" Recessed Hydraulic Cylinder Plate?
br/> What is the material of the T-H Marine ATLAS™ 8" Polished Recessed Hydraulic Cylinder Plate?
What is the weight of the product?
What is the color of the Recessed Hydraulic Cylinder Plate T-H Marine ATLAS™ 8" Polished?
What is the finish of the product?
How powerful is the product?
Who is T-H Marine supplies? T-H Marine manufactures thousands of products in many categories, including media supportsoutboard motor, outboard tilt and trim, access hatches, deck plates, cover locks, deck fittings, livewell ventilation, plumbing fittings, battery trays, fishing rod holders, boat lights, rigging accessories. , trolling motor accessories, pontoon boat parts and general boat accessories. How to describe the Polished T-H Marine ATLAS™ 8" Recessed Hydraulic Jack Plate? This high-tech, high-speed, one-piece design uses an innovative rod and groove lift system. This system is capable of handling the pressure brought by the engine off -heaviest and most powerful V6 edge on the market All hydraulic devices are integrated into the jack, eliminating the need to install pumps and fuel tanks in the beam and hydraulic hoses that pass through the beam. high quality engineering polymer rodstechnology have 6 times wear resistance than steel and are made of self-lubricating materials from top to bottom in 8 seconds, installation time.is only half of similar sockets. Handles all outboard gears, including the powerful Verado V6 engine. This high-tech, high-speed integrated design uses an innovative rod-and-groove lifting system to cope with the pressure of the heaviest and most powerful V6 outboard engine on the market. All hydraulic devices are integrated into the jack, eliminating the need to install pumps and fuel tanks in the beam and hydraulic hoses through the beam. High-tech engineering polymer rods have 6 times the wear resistance of steel and are made from self-lubricating materials. From top to bottom in 8 seconds, installation time is only half that of similar socketss. Handles all outboard gears, including the powerful Verado V6 engine.
- 8" recessed hydraulic cylinder plate
- Polished for easy cleaning
- Fits engines up to 300 hp or up to 625 pounds dry weight
- 5 reasons why you should choose the ATLAS™ Hydraulic Jack Plate
- 1 Quality: ATLAS ™ is made with high quality materials. All this lasts a long time and never rusts
- 2. Durability: The ATLAS™ jack plate is robust and can withstand the abuse of engines up to 300 hp. or up to 625 pounds dry weight
- 3. Worms
- The Atlas 8-inch hydraulic jack plate is the best in the industry.
- The Atlas hydraulic cylinder plate has a polished finish for a sleek, professional look
- Designed to support engines up to 300 horsepower or up to 625 pounds of weight. sec.
- 5 reasons why you should choose the plateAtlas Hydraulic Cylinder: - It's truly the best in the business, - Polished finish for a sleek, professional look, - Designed to support engines up to 300 horsepower or up to 625 pounds dry weight, - 5 reasons why you should choose it
The T-H Marine ATLAS&trade is the best jack plate in the world. It is factory installed by more boat manufacturers than any other plate and used by more professional fishermen than any other plate. It is made in the USA and is the only jack plate with a lifetime.
What is the material of the Polished T-H Marine ATLAS™ 8" Recessed Hydraulic Jack Plate? Aluminum- 8" recessed hydraulic cylinder plate
- Polished for easy cleaning
- Designed for engines up to 300 hp or up to 625 pounds dry weight
- 5 reasons why you should choose the ATLAS™ hydraulic jack plate
- 1. Quality: ATLAS™is made with high quality material that lasts a long time and never rust.
- 2. Durability: The ATLAS™ Jack Plate is rugged and can withstand abuse from engines up to 300 hp or up to 625 pounds dry weight.
- 3. Vers
- The Atlas 8-inch hydraulic jack plate is the best in the industry.
- The Atlas hydraulic jack plate has a polished finish for a sleek, professional look.
- Designed to support engines up to 300 horsepower or up to 625 pounds dry weight.
- 5 reasons why you should choose Atlas Hydraulic Jack Plate: - It's truly the best in the industry, - Polished finish for a sleek, professional look, - Designed to support engines up to 300 horsepower or up to 625 pounds dry weight, - 5 reasons why you should choose it
- The TH Marine Atlas 8" Jack Plate is the best hydraulic jack plate in the world.
- EIt is factory installed by more boat manufacturers than any other plate.
- It is used by more professional anglers than any other plate.
- li>
- Quality of tip, factory installed by more boat manufacturers than any other plate.
- Used by more professional fishermen than any other jack plate.
- The best hydraulic jack plate in the world, with ATLAS& 8482; Factory installed by more boat manufacturers than any other plate.
Save $633 with the purchase of the T-H Marine ATLAS™ Polished 8" Recessed Hydraulic Cylinder Plate for only $1,439 from NVN Marine! Free same day delivery before 3 p.m. T-H Marine ATLAS™ Plpolished 8" recessed hydraulic jack plate Technical specifications
| Type: | Boat fittings | Jack plates |
|---|---|
| Seller: | T-H Marine Supplies |
| Weight: | 67.0 lbs |
| Shipping Weight: | 67.0 lbs |
|---|---|
| Box sizes: | 11.00 (h) x 18.00 (w) x 21.00 (w) |
| Cubic feet: | 4158.0 |
| Returnable: | Yes |
| P65: | Yes |
For detailed shipping terms, please see our shipping policy and you can find our return policyr and refund here.
- T-H Marine ATLAS 8 in. Hydraulic Recessed Jack Plate - Heavy Duty Black
- T-H Marine ATLAS 8" Recessed Hydraulic Jack Plate - Heavy Duty
- T-H Marine ATLAS 8" Recessed Hydraulic Jack Plate - Gloss Black Anodized
- T-H Marine ATLAS 6" STD Polished Recessed Hydraulic Jack Plate
- T-H Marine ATLAS 6" Polished Recessed Hydraulic Jack Plate
- T-H Marine ATLAS 6 in. Recessed Hydraulic Jack Plate - Heavy Duty - Black
- T-H Marine ATLAS 6" Recessed Hydraulic Jack Plate - Heavy Duty
