T-H Marine ATLAS Polished 14" Recessed Hydraulic Jack Plate

T-H Marine ATLAS Polished 14" Recessed Hydraulic Jack Plate Boat Outfitting

ATLAS™ 14" Polished Recessed Hydraulic Jack Plate

Designed for engines up to 300 hp or up to 625 pounds dry weight.

5 REASONS WHY YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC CYLINDER PLATE

• ATLAS™ is truly the world's best hydraulic cylinder plate
  • ATLAS™ is truly the world's best hydraulic cylinder plate
    • li>
    • ATLAS™ is factory installed by more boat manufacturers than any other plate
    • ATLAS™ is used by more professional fishermen than any other hydraulic ram plate
    • ATLAS™ is the world's best-selling hydraulic plate - sold and serviced by over 100,000 outlets
    • The ATLAS™ hydraulic actuator is manufactured in the USA while our competitors come from China

    6 WAYS FOR THE ATLAS™ TO CHANGE THE FOREVER FLAT HYDRAULIC JACK

    • ATLAS™ is manufactured by T-H Marine/CMC, who were the FIRST to offer an actuatorinside the jack plate - the competition has copied
    • ATLAS ™ was the first plate to offer pre-drilling for shallow water anchors - the competition has copied
    • ATLAS™ was the first and only plate that did not require regular grease lubrication - competition design can't do that
    • ATLAS™ was the first plate to include a cable robust safety guard to protect boaters from engine entry into the cockpit in the event of a breakdown
    • ATLAS™ was the first plate to offer very simple actuator replacement in the field
    • ATLAS™ was the first major development in hydraulic cylinder plates in over a decade, driving the improvement of hydraulic cylinder plates
    li>

    This product can expose you to chemicalmics known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,

    
    
    Atlas is a new design that can meet the needs of today's high-performance outboard motors. This one-piece design with an innovative rod and groove lifting system can handle the pressure of the heaviest and heaviest powerful outboard motors (350 hp or less) on the market today. All hydraulic devices are integrated into the jack, eliminating the need to install pumps and fuel tanks inside the beam and hydraulic hoses running through the beam. High-tech engineering polymer rods have 6 times the wear resistance of steel and are made from self-lubricating materials. Lifting up and down in 8 seconds,the installation time is only half that of similar jacks. Handles all outboard equipment, including the powerful Verado V6 engine.
    
    Atlas is a new design that can meet the needs of today's high-performance outboard engines. This one-piece design featuring an innovative rod and slot lift system can handle the pressure of the heaviest, most powerful outboard motors (350 hp or less) on the market today. All hydraulic devices are integrated into the jack, eliminating the need to install pumps and fuel tanks in the beam and hydraulic hoses running through the beam. High-tech engineered polymer rods have 6 times the wear resistance of steel and are made from self-lubricating materials. From top to bottom in 8 seconds, installation time is only half that of similar sockets. Handles all outboard gears, includingincluding the powerful Verado V6 engine.
    PRODUCT ID: 81671
    SKU: NVN-81671
    CSKU: CWR-81671
    REWRITE: 92782-t-h-marine-atlas-14-set-back-hydraulic
    MPN: AHJ- 14V-DP
    UPC: 733572084207
    ASIN: B012RR0LUC
    WSKU: THMAHJ14VDP
    SSKU:
    NAME: T-H MARINE ATLAS 14" REMOVAL HYDRAULIC JACK PLATE
    PTITLE: T-H Marine ATLAS™ Polished 14" Recessed Hydraulic Jack Plate
    TYPE: Boat Equipment -> Jack Plates
    SELLER: T-H Marine Supplies
    VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> PARTS AND POWERWATER ACCESSORIES T-H Marine ATLAS 14" Set Back Hydraulic Jack Plate Polished - AHJ-14V-DP
    
    Gtags:
    

    T-H Marine

    Jack

    Hydraulic

    
    GSpecs:
    
    T-H Marine ATLAS™ Polished 14" Recessed Hydraulic Cylinder Plate Product Description

    Polished ATLAS™ 14" Recessed Hydraulic Cylinder Plate

    Designed for engines up to to 300 hp or up to 625 pounds dry weight.

    5 REASONS WHY YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE

    • ATLAS™ is truly the best hydraulic jack plate on the market. worldwide
    • ATLAS™ is factory installed by more boat manufacturers than any other plate
    • ATLAS™ is used by more professional fishermen than any other hydraulic ram plate
    • ATLAS™ is the world's best-selling hydraulic plate – sold and serviced by more locations
    • The ATLAS™ hydraulic actuator is made in the USA, while our competitors come from China

    6 WAYS THE ATLAS™ CAN CHANGE HYDRAULIC JACK PLATES FOREVERURS

    • ATLAS™ is manufactured by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
    • ATLAS™ was the first plate to offer pre-drilling for shallow water anchors - the competition copied
    • ATLAS™ was the first and only plate that did not require regular lubrication at grease - competition design can't do this
    • ATLAS™ was the first plate to include a heavy-duty safety cable to protect boaters from engine entry into the cockpit in the event of a failure
    • ATLAS™ was the first plate to offer very simple actuator replacement in the field
    • ATLAS™ was the first major development in the field of hydraulic cylinder plates for over a decade - driving improvements in hydraulic cylinder plates

    This product may cause you expose chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,

    
    
    Atlas is a new design that can meet the needs of today's high-performance outboard motors. This one-piece design with an innovative rod and groove lifting system can handle the pressure of the heaviest, most powerful outboard motor (350 hp or less) on the market today. All hydraulic devices are integrated into the jack, eliminating the need to install pumps and fuel tanks inside the beam and hydraulic hoses running through the beam. High-tech engineering polymer rods have 6 times the wear resistance of steel and are made from self-lubricating materials. Lifting up and downin 8 seconds, the installation time is only half that of similar jacks. Handles all outboard equipment, including the powerful Verado V6 engine.
    
    Atlas is a new design that can meet the needs of today's high-performance outboard engines. This one-piece design featuring an innovative rod and slot lift system can handle the pressure of the heaviest, most powerful outboard motors (350 hp or less) on the market today. All hydraulic devices are integrated into the jack, eliminating the need to install pumps and fuel tanks in the beam and hydraulic hoses running through the beam. High-tech engineering polymer rods have 6 times the wear resistance of steel and are made of self-lubricating materials. From top to bottom in 8 seconds, installation time is only half that of similar sockets. Manages alloutboard gears, including the powerful Verado V6 engine.
    
    T-H Marine ATLAS™ Polished 14" Recessed Hydraulic Cylinder Plate Related ProductsT-H Marine Replacement Actuator for ATLAS™ Cylinder Plates After March 2014
    T-H Marine Replacement Relay Harness for Plates Hydraulic Jack Plate 2014+
    T-H Marine ATLAS™ Jack Plate Replacement Rocker Switch
    T-H Marine ATLAS™ Hydraulic Gauge Kit f/6", 10", 12" and 14" Jack Plate ATLAS™ - Black Bezel
    T-H Marine ATLAS™ Hydraulic Gauge Kit f/6", 10", 12" and 14" ATLAS™ Jack Plates - Stainless Steel Bezel
    T-H Marine 14" Atlas Series Hot Shot™ Jack Plate Hole Shot Plate - Verado
    
    
    Frequently Asked Questions (FAQ) about T-H Marine ATLAS™ Polished 14" Recessed Hydraulic Jack Plate Who is T-H Marine Supplies?
    How to describe T-H Marine ATLAS™ Polished 14" Recessed Hydraulic Cylinder Plate?
    Who is T-H Marine Supplies? T-H Marine manufactures thousands of products in many categories, including outboard motor mounts, outboard tilt and trim, access hatches, deck plates, cover locks, l deck fittings, livewell aeration, plumbing fittings, battery trays, fishing rod holders, boat lights, rigging accessories. , trolling motor accessories, pontoon boat parts and general boat accessories. How to describe the T-H Marine ATLAS™ 14" Polished Recessed Hydraulic Jack Plate? Atlas is a new design that can meet the needs of today's high-performance outboard motors. This one-piece design with a system innovative rod and slot lift can handle the pressure of the heaviest and most powerful outboard motors (350 hp or less) on the market today. All hydraulic devices are integrated.jack, which is integrated into the jack. avoids the difficulty of installing pumps and fuel tanks in the beam and hydraulic hoses passing through the beam. High-tech engineering polymer rods have 6 times the wear resistance of steel and are made from self-lubricating materials. From top to bottom in 8 seconds, installation time is only half that of similar sockets. Handles all outboard gears, including the powerful Verado V6 engine.
    • The polished Atlas™ 14-inch recessed hydraulic cylinder is designed for engines up to 300 hp or up to 625 pounds of dry weight.
    • The Atlas™ Hydraulic Jack Plate is constructed with a unique design that provides the highest standards of performance and safety.
    • The Atlas Hydraulic Jack Plate ™ comes with a lifetime warranty, so you can rest assured it will last. for generations to comenir.
    • The Atlas™ Polished 14" Recessed Hydraulic Jack Plate is made in
    • Designed for engines up to 300 hp or up 'at 625 hp lbs dry weight.
    • Polished and rated to last, with a lifetime warranty.
    • Comes with 5 reasons why you should choose Atlas:
    • 1) Durable and reliable
    • 2) Innovative design and user-friendly features
    • 3) High quality materials guaranteed to last a lifetime
    • 4 ) Lifetime warranty for peace of mind
    • 5) Unbeatable price
    
    
    Save $694 on purchase the Polished T-H Marine ATLAS™ 14" Recessed Hydraulic Cylinder Plate for only $1,579 from NVN Marine! Free same day delivery before 3 p.m. T-H Marine ATLAS™ Polished 14" Recessed Hydraulic Jack Plate Technical Specifications

    Type:	Boat Outfitting | Jack Plates
    Seller:	T-H Marine Supplies

    T-H Marine ATLAS™ 14" Polished Recessed Hydraulic Jack Plate Reviews Users T-H Marine ATLAS™ 14" Polished Rear Hydraulic Jack Plate Shipping & Return

    For detailed shipping policy, please see our shipping policy and you can find our return & refund policy here.

• T-H Marine ATLAS 14 in. Recessed Hydraulic Jack Plate - Heavy Duty
• T-H Marine ATLAS 12" Polished Recessed Hydraulic Jack Plate
• T-H Marine ATLAS 12 in. Hydraulic Recessed Jack Plate - Heavy Duty - Black
• T-H Marine ATLAS 12" Recessed Hydraulic Jack Plate - Heavy Duty
• T-H Marine ATLAS 12" Hydraulic Recessed Jack Plate - Anodized Gloss Black
• T-H Marine ATLAS 10" Polished Recessed Hydraulic Jack Plate
• T-H Marine ATLAS 10" Recessed Hydraulic Jack Plate - Heavy Duty