Trident Marine Blue Silicone Molded Wet Exhaust Elbow 8" ID 45 Degree with 4 T-Bolt Hose Clamps Boat Outfitting

8" ID 45 Degree Blue Silicone Molded Wet Exhaust Elbow with 4 T-Clamps

Mixture Rubber Marine Wet Exhaust Fittings of Trident Silicone They are molded of very High Temperature Blue Silicone EPDM Blend Rubber with a smooth bore and cover, except 6" ID elbows; or larger have reinforcing ribs molded into the exterior.

Features:

Four stainless steel T-bolt hose clamps
EDPM silicone/rubber blend very high temperature - molded
This elbow has excellent resistance to ozone, salt water, diesel fumes, splashes, cold, heat and aging
Exceeds (SAE J2006-R1 and ABYC & NMMA P-1) exhaust standards
Ultra high temperature blue silicone blended with EDPM rubber at 350°F (177°C) max in continuous

Construction:

Color: Blue
Reinforcement: Reinforcement ribs over 6 inches inside diameter. and more
Temperature range: up to 350°F (177°C)

Specifications:

Inner Diameter: (inch) 8" / 203.2 mm
A: (inch) 2.25" / (mm) 5.7
B: ( inches) 2.25" / (mm) 5.7
C: (inches) 8.5 inches / (mm) 21
R: (inches) 2.12 inches / (mm) 5.4
W: (inches) 0.37 " / (mm) 9.4
Elbow degree: 45 degrees

PRODUCT ID: 99739
SKU: NVN-99739
CSKU: CWR-99739
REWRITE: 110850-trident-marine-8-id-45-degree-blue -silicone
MPN: 240V80000-S/S
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: TRIDENT 8" ID 45 DEGREE WET EXHAUST MOLDED IN BLUE SILICONE
NAME_EX:
PTITLE: Trident Marine 8" ID 45 Degree Blue Silicone Molded Wet Exhaust Elbow with 4 necklacesT-rope
TYPE: Boat equipment | Fuel Systems
SELLER: Trident Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES> WATERCRAFT FUEL SYSTEMS> WATERCRAFT FUEL TANKS & PARTS
Amazon Category :

Gtags:

GSpecs:

Trident Marine 8" ID Blue Silicone Molded Wet Exhaust Elbow 45 Degree with 4 T-Bolt Hose Clamps Product Description

8" ID Blue Silicone Molded Wet Exhaust Elbow 45 Degree 45 Degree with 4 T-Bolt Clamps Trident Rubber and Silicone Blend Marine Wet Exhaust Fittings. They are molded in a super high temperature blue silicone EPDM rubber blend with a smooth bore and cover; except that elbows 6" ID or larger have reinforcing ribs molded on the outside.

Features:

Four Stainless Steel T-Bolt Hose Clamps
Extra High Temperature EDPM Silicone/Rubber Blend - Molded
This elbow has excellent resistance to ozone, water salty, diesel fumes, splashes, cold, heat and aging
Exceeds standardsexhaust pipes (SAE J2006-R1 and ABYC & NMMA P-1)
Ultra high temperature blue silicone mixed with EDPM rubber at 350°F (177°C) maximum continuous

Construction:

Color: Blue
Reinforcement: Reinforcement ribs on 6" I.D. and above
Temperature Range: Up to 350°F (177°C)

Specifications:

Inner Diameter: (inch) 8" / 203.2 mm
A: (inch) 2.25" / (mm) 5.7
B: (inch) 2. 25" / (mm) 5.7
C: (inches) 8.5 inches / (mm) 21
R: (inches) 2.12 inches / (mm) 5.4
W: (inches) 0.37" / (mm) 9.4
Elbow degree: 45 degrees

Frequently Asked Questions (FAQ) about TRIDENT BLUE SILICONE MOLDED WET EXHAUST 8" ID 45 DEGREES Who is the Trident Marine?
Who is the Trident Marine? Trident Marine brings you the best. Trident Marine offers pipes, tubes, conduitsits, flexible wet exhaust conduits and connectors to the global maritime market. Trident Marine also builds and supplies marine LP gas systems.

Save $202 on the purchase of the Trident Marine Blue Silicone Molded Wet Exhaust Elbow 8" ID 45 Degree with 4 Collars T-Bolt Tighteningfor only $271 from NVNMarin! Same day dispatch before 3 p.m. Trident Marine 8" ID 45 Degree Blue Silicone Molded Wet Exhaust Elbow with 4 T-Clamps Technical Specifications

Type:	Equipment Boat \| Fuel Systems
Seller:	Trident Marine
User Guide:	Download PDF

Molded Silicone Wet Exhaust Blue Trident Marine 8" ID 45 Degree Elbow with 4 T-Clamps Policyreturns and refunds here.