Turning Point Express Mach3 - Right Hand - Stainless Steel Propeller - EX-1417 - 3 Blades - 14.25" x 17 Pitch Boat Outfitting

Express Mach3™ - Right hand - Stainless steel propeller - EX-1417 - 3 blades - Pitch 14.25" x 17

Using close to 40 years of racing boat experience and expertise in high-performance propeller design, our Express Mach3™ propeller series captures all the best techniques and technologies available to get the most out of your boat. Aggressive pitch angles, designs. radical, sharp cup profiles to achieve maximum speed, while providing class-leading handling and acceleration? You got it, and wait for it? p>By upgrading your current propeller from aluminum to stainless steel, or from an older generation design to the latest technology, Express Mach3 Propeller is the best investment you can make in boat improvement . around the competition, and can bring spectacular improvements to performancerances of the boat. The gain in fuel economy can often pay off the cost of a new propeller within a season or two, making it a good investment for your time on the water.

Exclusive stainless steel, TP17™

Formulated to meet the rigorous requirements of New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition – more shine, better corrosion resistance. Nearly 250% stronger and 5 times more durable than regular stainless steel. This new material gives Turning Point engineers and designers the freedom to produce radical new designs that will help you get the most out of your boat's performance.

Large flow-through exhaust ports free

Turning Point propeller cases have huge exhaust flow paths. Their propellers have 40% more exhaust flow area compared to competitive products.ents. More exhaust flow and less back pressure can generate more power. Like the manifolds for your boat.

Turning Point manufactures Express propellers to fit the 9.9(bigfoot)-300+hp Evinrude, Force, Honda, Johnson, Mariner, Mercruiser , Mercury, Nissan, OMC, Parsun, Suzuki, Tohatsu, Volvo Penta and Yamaha Outboards and Sterndrives. Choose one of our MasterGuard lifetime warranty installation kits to fit your engine, then choose the propeller that matches your boating needs. There are 3- and 4-blade, left- and right-spin propeller models, with a variety of diameter and pitch options, available for almost every type of boat. Turning Point props run faster, pull harder and handle better.

Note: A hub kit is required to install this propeller. Consult the Turning Point Selection Chart or Prop Wizard™ for selectionn of the hub kit.

This product can expose you to chemicals including LEAD, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit P65Warnings.ca. .gov.

The Express Series is now manufactured from industry-leading TP17 stainless steel, ideal for any application requiring enhanced acceleration, turning and loading capabilities...
PRODUCT ID: 56031
SKU: NVN-56031
CSKU: CWR-56031
REWRITE: 67142-turning-point-express-mach3-right-hand
MPN: 31501712
UPC: 652480200793
br> br> ASIN: B00TUNZP0S
WSKU:
SSKU:
KSKU:
GSKU:
MSKU: 31501712
LSKU:
NAME: Turning Point Express Mach3™ - Right hand - Stainless steel propeller - EX-1417 - 3 blades - 14.25" x 17pitch
NAME_EX: TURNING POINT EXPRESS SS RH PROPELLER 14.25" 17 steps
TYPE: Boat equipment | Propeller
SELLER: Turning Point Propellers
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES> WATERCRAFT ENGINE PARTS> Watercraft Propellers
Automotive Parts & Accessories
Turning Point Propeller 31501712 Express Stainless 3-Blade Propeller (Straight 14- 1/4 3 blades - 31501712
Automotive Parts and Accessories
Gtags:

GSpecs:

Turning Point Express Mach3™ - Right Hand - Stainless Steel Propeller - EX-1417 - 3 Blades - 14.25" x 17 Pitch Product Description

Express Mach3™ - Right Hand - Stainless Steel Propeller - EX-1417 - 3 blades - 14.25" x 17 pitch

Using nearly 40 years of racing boat experience and design expertise of high-performance propellers, our Express Mach3™ propeller series captures all the best techniques and technologies available to get the most out of your boat. Aggressive pitch angles, radical designs, sharp cup profiles. These three-blade propellers excel at achieving maximum speed, while providing best-in-class maneuverability and acceleration. Hole shot? I get it, and hang in there! A turn? We have that too! Maximum speed? We say "No propeller faster on water" for a reason!

By upgrading your current propeller from aluminum tostainless steel, or from an older generation design to the latest technology, Express Mach3 Propeller is the best investment in boat improvement you can make. Today's designs will outperform the competition and can provide dramatic improvements in boat performance. The fuel economy gain can often cover the cost of a new propeller within one or two seasons, making it a wise investment for your time on the water.

Exclusive stainless steel, TP17™

Formulated to meet the rigorous requirements of New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition – more shine, better corrosion resistance. Nearly 250% stronger and 5 times more durable than regular stainless steel. This new material gives Turning Point engineers and designers the freedom to produce radical new designsthat will help you get the most out of your boat's performance.

Large, free-flowing exhaust ports

Turning's propeller housings Point have huge exhaust flow paths. Their propellers have 40% more exhaust flow area compared to competitive products. More exhaust flow and less back pressure can generate more power. Like manifolds for your boat.

Turning Point manufactures Express propellers suitable for Evinrude, Force, Honda, Johnson, Mariner, Mercruiser, Mercury, Nissan 9.9 (bigfoot ) at over 300 hp. , OMC, Parsun, Suzuki, Tohatsu, Volvo Penta and Yamaha outboards and sterndrives. Choose one of our MasterGuard lifetime warranty installation kits to fit your engine , then choose the propeller that suits your navigation needs. There are 3 and 4 blade propeller models, left and right rotation, with a varietyof diameter and pitch options, available for almost every type of boat. Turning Point props run faster, pull harder and handle better.

Note: A hub kit is required to install this propeller. Consult the Turning Point Selection Chart or Prop Wizard™ for hub kit selection.

This product can expose you to chemicals including LEAD, known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,

The Express Series is now manufactured from industry-leading TP17 stainless steel, ideal for any application requiring acceleration , improved shooting and charging. transport capacities...

Turning Point Express Mach3™ - Right hand - Stainless steel propeller - EX-1417 - 3Blades - 14.25" x 17 Pitch Related ProductsDavis Prop Sox
Attwood Prop Wrench Set - Fits 17/32" to 1-1/4" Propeller Nuts
High performance waterproof grease for Corrosion Block - 2 oz Tube - Non-Hazardous, Non-Flammable and Non-Toxic
High Performance Corrosion Block Waterproof Grease - (2) 3 oz Cartridges - Non-Hazardous, Non-Flammable and Non-Toxic
Corrosion Block High Performance Waterproof Grease - 14 oz Canister - Non-Hazardous, Non-Flammable and Non-Toxic
Corrosion Block High-Performance Waterproof Grease - 16 oz Jar - Non-Hazardous, Non-Flammable and Non-Toxic
Forespar Lanocote RuSt & Corrosion Solution Prop and Bottom - 16 oz.
Sea-Dog Galvanized Propeller Wrench for 1-1/16" Propeller Nut
T-H Marine Prop Master Prop Stop Propeller Stopper

Frequently Asked Questions (FAQ) about Turning Point Express Mach3™ - Right Hand - Stainless Steel Propeller - EX-1417 - 3 Blades - 14.25" x 17 Pas Who are Turning Point propellers?
How to describe Turning Point Express Mach3™ - Right hand - Stainless steel propeller - EX-1417 - 3 blades - 14.25" x 17 pitch?
What is the type of product?
Turning side of the product?
What is the material of the Turning Point Express Mach3™ - Right hand - Stainless steel propeller - EX-1417 - 3 blades - 14.25" x 17 pitch?
What is the style of the product? ?
What is the best use of the product?
What are the dimensions of the product?
What is the diameter (inches) of the product?
How compatible is this product?
What is the pitch of the product?
How many blades does this product have?
Who is Turning Point Propellers? Turning Point Propellers manufactures high performance aluminum and stainless steel propellers. Turning Point was the first to introduce the interchangeable hub system to the market. This MasterGuard hub system helps protect moteurs and drives against shifting shocks, shocks and violent vibrations. It is also the most durable hub system available. How to describe Turning Point Express Mach3™ - Right hand - Stainless steel propeller - EX-1417 - 3 blades - 14.25" x 17 pitch? The Express series is now made of industrial materials - State-of-the-art TP17 stainless steel, ideal for any application requiring enhanced acceleration, rotation and load capabilities...What is the product type Modular Propeller

$302

Turning Point Express Mach3™ - Right hand - Stainless steel propeller - EX-1417 - 3 blades - 14.25" x 17 pitch

$280

Type:	Boat equipment \| Propeller
Supplier:	Turning Point Propellers
Weight:	16.05 lbs
Pitch:	17"
Material:	Stainless steel
Diameter (inches):	14-1/4"
Rotation:	Right
User Guideilizer:	Download PDF
Product brochure:	Download PDF

Shipping Weight:	16.05 lbs
Box sizes:	8.00 (h) x 16.00 ( w) x 16.00 ( l)
Cubic feet:	2048.0
Returnable:	Yes

For detailed shipping terms, please see our Shipping Policy and you can find our return and refund policy here.