Turning Point Express Mach4 - Left - Stainless Steel Propeller - EX1/EX2-1317-4L - 4 Blades - 13.25" x 17 Pitch Boat Outfitting

Express Mach4™ - Left - Stainless steel propeller - EX1/EX2-1317-4L - 4 blades - 13.25" x 17 pitch

The propeller that put the "four" in Perfourmance! Turning Point's four blades revolutionized the propeller market when they were introduced. No one had ever produced a cutting edge swept cleaver design for applications from 40 to 40. 150 hp rules, proving you can use a four-blade that delivers unprecedented holeshot, maneuverability and rough-water stability without the loss of high-end speed you experience with other manufacturers' propellers. These Turning Point propellers also produced up to 46% more reverse thrust than other comparable designs in recent tests.

Now made in our industry-leading TP17 stainless steel, the Express Mach4 series is perfect for any application that requires enhanced acceleration,turn and load. This series of propellers is ideal. suitable for water sports, stern drive boats, tri-toons, bay boats and any vessel that can use the stern lift. This is our best upgrade from the older stainless steel models from the 70s, 80s, 90s and 2000s, and will outperform most newer accessories, including five blade ski accessories.

Exclusive stainless steel, TP17™

Formulated to meet the rigorous requirements of New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition – more shine, better corrosion resistance. Nearly 250% stronger and 5 times more durable than regular stainless steel. This new material gives Turning Point engineers and designers the freedom to produce radical new designs that will help you get the most out of your boat's performance.

Grands Free Flow Exhaust Ports

Turning Point propeller housings have huge exhaust flow paths. Their propellers have 40% more exhaust flow area compared to competitive products. More exhaust flow and less back pressure can generate more power. Like the manifolds for your boat.

Turning Point manufactures Express propellers suitable for Evinrude, Force, Honda, Johnson, Mariner, Mercruiser, Mercury, Nissan, OMC, Parsun , Suzuki, Tohatsu 9.9 (bigfoot) -300+hp, Volvo Penta and Yamaha outboards and Sterndrives. Choose one of our MasterGuard lifetime warranty installation kits to fit your engine, then choose the propeller that matches your boating needs. There are 3- and 4-blade, left- and right-spin propeller models, with a variety of diameter and pitch options, available for almost every type of boat. Turni accessoriesng Point run faster, pull harder and handle better.

Note: A hub kit is required to install this propeller. Consult the Turning Point Selection Chart or Prop Wizard™ for hub kit selection.

This product can expose you to chemicals including LEAD, which is known to the State of California to cause cancer and birth defects or other harm. .productive harm For more information, go to P65Warnings.ca.gov.

CWR-12-22PD is specifically designed for structured cabling. 12-space multifunctional system for installing multiple patch panels and other voice/data devices where floor and wall space is at a premium Features: High strength welded steel structure.26 inch provides additional space for cables and jumpers. The standard configuration is an adjustable wide rack. The lockable open and swivel center section is accessible from front to back. Features a lockable/lockable front panel for added security. Left or right opening, designed for passive thermal management; An optional fan kit is provided, including a packing bag with 50 mounting screws.
PRODUCT ID: 63342
SKU: NVN-63342
CSKU: CWR-63342
REWRITE: 74453-turning-point-express-mach4-left-hand
MPN: 31431740
UPC: 652480206139
ASIN: B01JSD6T72
WSKU:
SSKU:
KSKU:
GSKU:
MSKU: 31431740
LSKU:
NAME: Turning Point Express Mach4 ™ - Left - Stainless Steel Propeller - EX1/EX2-1317-4L - 4 Blades - 13.25" x 17 Pitch
NAME_EX: TURNING POINT EXPRESS SS LH PROPELLER 13.25" Turning Point Express Mach4™ - Left - Propellerstainless steel - EX1/EX2-1317-4L - 4 blades - 13.25" x 17 pitch
TYPE: Boat Equipment | Propeller
SELLER: Turning Point Propellers
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES> WATERCRAFT ENGINE PARTS> WATERCRAFT PROPELLERS
Automotive Parts & Accessories

Turning Point Stainless Steel Straight Propeller Express - 14 x 19 - 4 blades
Automotive Parts and Accessories
Gtags:

GSpecs:

Turning Point Express Mach4™ - Left Hand - Stainless Steel Propeller - EX1/EX2-1317-4L - 4 Blades - 13.25" x 17 Pitch Product Description

Express Mach4™ - Left Hand - Stainless Steel Propeller - EX1/EX2-1317-4L - 4 Blades - 13.25" x 17 Pitch

The propeller that put the "four" into performance! Turning Point's four blades revolutionized the propeller market when they were introduced. No one had ever produced a state-of-the-art Swept Cleaver design for 40-150 hp applications. These propellers have rewritten the rules, proving that you can use a four blade offering unprecedented holeshot, maneuverability and rough water stability without the loss of top speed you experience with propellers from other manufacturers. These Turning Point propellers also produced up to 46% more reverse thrust than other comparable designs in recent tests.

Now made in our premium stainless steelWith an industry-leading TP17, the Express Mach4 Series is perfect for any application that demands enhanced acceleration, handling, turning and load-carrying capabilities. This series of accessories is ideal for watersports, stern drive boats, tri-toons, bay boats and any vessel that can use a stern lift. This is our best upgrade from the older stainless steel models from the 70s, 80s, 90s and 2000s, and will outperform most newer accessories, including five blade ski accessories.

Exclusive stainless steel, TP17™

Formulated to meet the rigorous requirements of New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition – more shine, better corrosion resistance. Nearly 250% stronger and 5 times more durable than regular stainless steel. This new material gives engineers and designersTurning Point the freedom to produce radical new designs that will help you get the most out of your boat's performance.

Large, free-flowing exhaust ports

Turning Point propeller housings have huge exhaust flow paths. Their propellers have 40% more gas flow area than the competing product. More exhaust flow and less back pressure can generate more power. Like manifolds for your boat.

Turning Point manufactures Express propellers suitable for Evinrude, Force, Honda, Johnson, Mariner, Mercruiser, Mercury, Nissan 9.9 (bigfoot ) at over 300 hp. , OMC, Parsun, Suzuki, Tohatsu, Volvo Penta and Yamaha outboards and sterndrives. Choose one of our MasterGuard lifetime warranty installation kits to fit your engine , then choose the propeller that suits your navigation needs. There are 3rd propeller modelst 4 blades, left and right rotating, with a variety of diameter and pitch options, available for almost all types of boats. Turning Point props run faster, pull harder and handle better.

Note: A hub kit is required to install this propeller. Consult the Turning Point Selection Chart or Prop Wizard™ for hub kit selection.

This product can expose you to chemicals, including LEAD which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,

CWR-12-22PD is specifically designed for structured cabling. This is a multifunctional 12-space system for installing multiple patch panels and other voice/data devices where floor and wall space is at a premium.cious. Characteristics: High resistance of the welded steel structure. The 26-inch width provides additional space for cables and jumpers. The standard configuration is an adjustable wide rack. The lockable open and swivel center section is accessible from front to back. Features a lockable/lockable front panel for added security. Left or right opening, designed for passive thermal management; An optional fan kit is provided, including a packing bag with 50 mounting screws.

Turning Point Express Mach4™ - Left Hand - Stainless Steel Propeller - EX1/EX2-1317-4L - 4 Blades - 13.25" x 17 Pitch Related ProductsDavis Prop Sox
Attwood PropGame of wrenches - Fits 17/32" to 1-1/4" propeller nuts
High performance waterproof corrosion block grease - 2 oz tube - Non-hazardous, non-flammable and non-toxic
High performance corrosion block Waterproof grease - (2)3 oz cartridges - Non-hazardous, non-flammable and non-toxic
Corrosion Block High Performance Waterproof Grease - 14 oz Cartridge - Non-hazardous, non-flammable and non-toxic
Corrosion Block High Performance Waterproof Grease - Can of 16 oz - Non-hazardous, non-flammable and non-toxic 1/16" Propeller Nut
T-H Marine Prop Master Prop Stop Propeller Stopper

Frequently Asked Questions (FAQ) about Turning Point Express Mach4™ - Left - Stainless Steel Propeller - EX1/EX2-1317-4L - 4 Blades - 13.25" x 17 Pitch Who are the propellers Turning Point?
How to describe Turning PointExpress Mach4™ - Left - Stainless Steel Propeller - EX1/EX2-1317-4L - 4 blades - 13.25" x 17 pitch?
Turning side of the product?
What is Point Express Mach4™ Turning Material - Left - Stainless Steel Propeller - EX1/EX2-1317-4L - 4 Blades - 13.25" x 17 Pitch?
What is the diameter (inches) of the product?
What is thenot the product?
Who is Turning Point Propellers? Turning Point Propellers manufactures high performance aluminum and stainless steel propellers. Turning Point was the first to introduce the interchangeable hub system to the market. This MasterGuard hub system helps protect motors and drives from shifting shocks, shocks and harsh vibrations. It is also the most durable hub system available. How to describe Turning Point Express Mach4™ - Left hand - Stainless steel propeller - EX1/EX2-1317-4L - 4 blades - 13.25" x 17 pitch? CWR-12-22PD is specially designed for structured wiring. It is This is a multi-functional 12-space system for installing multiple patch panels and other voice/data devices where floor and wall space is at a premium. Features: High strength welded steel structure. 26-inch width provides additional spacebasic for cables and jumpers. The standard configuration is an adjustable wide rack. The lockable open and swivel center section is accessible from front to back. Features a lockable/lockable front panel for added security. Left or right opening, designed for passive thermal management; An optional fan kit is provided, including a packing bag with 50 mounting screws. Product rotation side? Left What is the material of the Turning Point Express Mach4™ - Left Hand - Stainless Steel Propeller - EX1/EX2-1317-4L - 4 Blades - 13.25" x 17 Pitch? Stainless SteelWhat is the diameter (inches) of the product? 17

Save $308 on the purchase of the Turning Point Express Mach4™ - Left hand - Stainless steel propeller - EX1/EX2-1317-4L - 4 blades - 13.25" x 17 pitchfor only $286 from NVN Marine! Same day shipping before 3 p.m. Turning Point Express Mach4™ - Left - Steel Propellerr stainless - EX1/EX2-1317-4L - 4 blades - 13.25" x 17 Pitch Technical specifications

Type:	Boat outfitter \| Propeller
Supplier:	Turning Point Propellers
Weight:	13.85 lbs
Rotation:	Left
Diameter (inches):	13-1/4"
Material:	Stainless steel
Pitch:	17"
User Guide:	Download PDF
Product Brochure:	Download PDF

Turning Point Express Mach4 ™ - Left hand - Stainless steel propeller - EX1/EX2-1317-4L - 4 blades - 13.25" x 17 pitch. User ReviewsTurning Point Express Mach4™ - Left Hand - Stainless Steel Propeller - EX1/EX2-1317-4L - 4 -Blade - 13.25" x 17 Pitch Shipping & Returns

Shipping Weight:	13.85 lbs
Box Sizes:	7.00 (h) x 14.00 (w) x 15.00 (w)
Cubic feet:	1,470.0
Returnable:	Yes