Turning Point Hustler - Right Hand - Aluminum Propeller - H1-1012 - 3 Blades - 10.75" x 12 Pitch Boat Outfitting

Hustler - Right hand - Aluminum propeller - H1-1012 - 3 blades - 10.75" x 12 pitch

Turning Point has built its reputation on focus Consistent on By designing the highest performing aluminum propellers in the world, using cutting-edge compression casting technology, they produce 3-blade Hustler propellers that perform as fast as their competitors' stainless steel propellers, and sometimes even faster, with super rigid, unique metallurgy! The blade geometry, aggressive pitch, rake and cup all give you the best they can offer: stainless steel performance at aluminum prices No. only top speed, maneuverability and holeshot improve, but also mid-range performance, which will save you a ton in gas mileage if you want to get the most out of this! that your boat and your engine can offer, alors the Hustler 3 Blade delivers.

The Three Blade Hustler is ideal for boaters looking to get the most out of their boat, and offers excellent bow lifting capabilities. These accessories are perfectly suited to high-power pontoons, fishing, semi-rigid and tiller boats. It fits all 6-75 hp outboards with 2.5", 3" and 3.5" bases from all engine manufacturers.

Squeeze Cast for strength

The performance of stainless steel is built into the Hustler Aluminum propeller range. This is achieved through a unique blade geometry and manufacturing process. exclusive Turning Point, compression casting. This process generates the highest possible mechanical properties in a cast aluminum propeller resulting in a tighter, high-density grain structure. Stiffer blades mean less flex and. faster propeller.Competitors' aluminum propellers are made using an old die-casting process that produces propellers with air bubbles, voids and low granularity, lack of strength and rigidity. charge, inefficiency, loss of propulsive efficiency.

Long-lasting Ultracoat™ powder coated finish

Exclusive to Turning Point, Ultracoat powder coating rivals a refined automotive finish and is more durable than paint. Using a state-of-the-art five-step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances the appearance of any boat. It is the benchmark for aluminum corrosion protection. The accessory looks newer for longer! Compared to competitors' 4-step painting and coating processes which result in significantly less abrasion and corrosion resistance.

Large air portsfree-flow exhaust

Turning Point propeller housings have massive exhaust flow paths. Their propellers have 40% more exhaust flow area compared to competitive products. More exhaust flow and less back pressure can generate more power. Like manifolds for your boat.

Turning Point manufactures Hustler propellers to fit Evinrude, Force, Honda, Johnson, Mariner, Mercruiser, Mercury, Nissan, OMC from 6 to 300hp and up. , Parsun, Suzuki, Tohatsu, Volvo Penta and Yamaha outboards and sterndrives. Choose one of our lifetime warranty masts, erGuard installation kits to match your engine, then choose the propeller that suits your browsing needs. There are 3- and 4-blade, left- and right-spin propeller models, with a variety of diameter and pitch options, available for almost every type of boat. Turning Point accessoriesrun faster, pull harder and handle better.

Note: A hub kit is required to install this propeller. Consult the Turning Point Selection Chart or Prop Wizard™ for hub kit selection.

This product may expose you to chemicals including LEAD, known to the State of California to cause cancer, birth defects, or other reproductive harm, and CARBON BLACK, known to the State of California to cause cancer. For more information,

H1-1012 Liar Spinning Propeller 3-blade aluminum propeller, suitable for engines from 6 to 74 hp (3, 5 inches). The gearbox is a straight propeller with a diameter of 10.125 inches and a diameter of 12 inches.
PRODUCT ID: 31714
SKU: NVN-31714
CSKU: CWR-31714
REWRITE: 42825-turning-point-hustler-right-hand
MPN: 21301210
UPC: 652480100734
ASIN: B0013JVHVI
WSKU:
SSKU:
KSKU:
GSKU:
MSKU: 21301210
LSKU:
NAME: Turning Point Hustler - Right hand - Aluminum propeller - H1-1012 - 3 blades - 10.75" x 12 pitch
NAME_EX: TURNING POINT HUSTLER AL RH PROPELLER 10.75"
TYPE: Boat Equipment | Propeller
SELLER: Turning Point Propellers
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES> POWERWATER ENGINE PARTS> POWERWATER PROPELLERS
Sports
Turning Point Hustler Aluminum Straight Propeller 10.5
Sportsts
Gtags:

GSpecs:

Turning Point Hustler - Right Hand - Aluminum Propeller - H1-1012 - 3 Blades - 10.75" x 12 Pitch Product Description

Hustler - Right Hand - Aluminum Propeller - H1-1012 - 3 Blades - 10.75" x 12 Pitch

Turning Point has built its reputation on a consistent focus on engineering the world's highest performing aluminum propellers. Using cutting-edge compression molding technology, they produce 3-blade Hustler propellers that perform as fast as their competitors' stainless steel propellers, and sometimes even faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake and cup all give you the best they can offer: stainless performance at aluminum prices! Not only does top speed, handling, and holeshot improve, but so does mid-range performance, which will save you a ton in gas mileage.If you want to get the most out of what your boat and engine can offer, then the Hustler 3 Blade has you covered.

The Three Blade Hustler is ideal for boaters looking to get the most out of their boat and offer excellent bow lifting capabilities. These accessories are perfectly suited to medium power pontoons, fishing boats, RIBs and tiller boats. It fits all 6-75 hp outboards with 2.5", 3" and 3.5" bases from all engine manufacturers.

Squeeze Cast for strength

The performance of stainless steel is built into the Hustler Aluminum propeller range. This is achieved through a unique blade geometry and manufacturing process. exclusive Turning Point compression casting process generates the highest possible mechanical properties in a resulting cast aluminum propeller.of a tighter grain structure at high density. Stiffer blades mean less flex and a faster propeller. Competitors' aluminum propellers are made using an old die-casting process that produces propellers with air bubbles, voids and low granularity, lack of strength and rigidity. charge, inefficiency, loss of propulsivecy efficiency.

Long-lasting Ultracoat™ powder coat finish

Exclusive to Turning Point, Ultracoat powder coat rivals a fine automotive finish and is more durable than paint. Using a state-of-the-art five-step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances the appearance of any boat. It is the benchmark for aluminum corrosion protection. The accessory looks newer for longer! Compared to painting and coating processesin 4 stages of competitors which results in significantly less resistance to abrasion and corrosion.

Large free-flowing exhaust ports

Housing Turning Point propellers have massive exhaust flow paths. Their propellers have 40% more exhaust flow area compared to competitive products. More exhaust flow and less back pressure can generate more power. Like manifolds for your boat.

Turning Point manufactures Hustler propellers to fit Evinrude, Force, Honda, Johnson, Mariner, Mercruiser, Mercury, Nissan, OM over 6 to 300 hp.C, Parsun, Suzuki, Tohatsu, Volvo Penta and Yamaha outboard engines and Sterndrives. Choose one of our MasterGuard lifetime warranty installation kits to fit your engine, then choose the propeller that matches your boating needs. There are 3 and 4 blade propeller models, left and right rotationoite, with a variety of diameter and pitch options, available for almost any type of boat. Turning Point props run faster, pull harder and handle better.

Note: A hub kit is required to install this propeller. Consult the Turning Point Selection Chart or Prop Wizard™ for hub kit selection.

This product can expose you to chemicals including LEAD, which is known to the State of California to cause cancer and birth defects or other reproductive problems, and CARBON BLACK, recognized by the State of California. in the State of California to cause cancer. For more information,

H1-1012 Spinning Propeller Liar 3-blade aluminum propeller, suitable for 6 to 74 hp (3.5 inches). The gearbox is a right-hand propeller with a diameter of 10.125 inches and a diameter of 12 inches.

Turning Point Hustler - Right Hand - Aluminum Propeller - H1-1012 - 3 Blades - 10.75" x 12 Pitch Related ProductsDavis Prop Sox
Attwood Propeller Wrench Set - For 17/32" to 1-1/4" propeller nuts
High performance waterproof corrosion block grease - 2 oz tube - Non-hazardous, non-flammable and non-toxic
High performance waterproof grease for Corrosion Block - (2) 3 oz Cartridges - Non-Hazardous, Non-Flammable and Non-Toxic
High Performance Waterproof Corrosion Block Grease - 14 oz Cartridge - Non-Hazardous, Non-Flammable and Non-Toxic
High Performance Waterproof Corrosion Block Grease - 16 oz Jar - Non-Hazardous, Non-Flammable and Non-Toxic
Forespar Lanocote Rust and Corrosion Solution, Accessory and Bottom - 16 oz.
Galvanized Propeller Wrench Sea-Dog for 1-1/16" Propeller Nut
T-H Marine Prop Master Prop Stop Propeller Stop

Frequently asked questions (FAQ) about Turning Point Hustler - Right hand - Aluminum propeller - H1-1012 - 3 blades - 10.75" x 12 Pitch Who is the Turning Point Propellers?
How to describe Turning Point Hustler - Right hand - Aluminum propeller - H1-1012 - 3 blades - 10.75" x 12 pitch?
Rotation side of the product?
What is the material of Turning Point Hustler - Right Hand - Aluminum Propeller - H1-1012 - 3 Blades - 10.75" x 12 Pitch?
What is the diameter (inches) of the product?
What is the pitch of the product?
Who is Turning Point Propellers? Turning Point Propellers manufactures high performance aluminum and stainless steel propellers. the first to introduce the interchangeable hub system to the market This MasterGuard hub system helps protect motors and drives from shifting shocks, shocks and strong vibrations.most durable yeu.available.How to describe Turning Point Hustler - Right Hand - Aluminum Propeller - H1-1012 - 3 Blades - 10.75" x 12 Pitch? H1-1012 Liar Spinning Propeller 3-Blade Aluminum Propeller, Suitable to engines from 6 to 74 hp (3.5 in.) The gearbox is a right-hand propeller with a diameter of 10.125 in. and a diameter of 12 in. Product rotation Right

$53

Turning Point Hustler - Right Hand - Aluminum Propeller - H1-1012 - 3 blades - 10.75" x 12 pitch

$63

Type:	Boat equipment \| Propeller
Supplier:	Turning Point Propellers
Weight:	4.15 lbs
Diameter (inches):	10 -3/4"
Material:	Aluminium
Pitch:	12"
Rotation:	Right
User Guide:	Download PDF
Product Brochure:	Download PDF

Bianca S on 2020-07-29

Five stars

Excellent service and product.

Shipping Weight:	4.15 lbs
Box sizes:	6.00 (h) x 13.00 (w) x 13.00 ( l)
Cubic feet:	1014.0
Returnable:	Yes
P65:	Yes

For detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.