UFlex Power A Mark II Single Motor Control Head with Trim Boat Outfitting

Power A Mark II
Electronic Control System - Single Motor with Trim

Easy to install Power A Mark II control system provides fingertip operation of the levers accelerator and gear change.
Using reliable and precise digital data transmission, this single or dual function control system is specifically designed to operate on mechanically controlled as well as electronic and electro-hydraulic gas and electro-hydraulic inboard, sterndrive and outboard engines. diesel.
The Power A Mark II is packed with features, including Dock Assist, which provides the operator with the ability to reduce the sensitivity of the throttle function for easier dock handling.
Others Standard features include rev synchronization, which reduces engine vibration. and improves fuel economy, a high idle feature to increase revs where higher idlevee is required for cold engine operation, programmable trolling valve control and neutral warm-up.
The sleek, ergonomic control makes the Power A Mark II suitable.for many types of applications ranging from power boats to sport, yachts and commercial applications.
Available with and without trim, the control features audible and visual interfaces that alert the operator to the current status of the control system.
With the ability to control up to 2 motors from 4 different stations, the Power A Mark II is a modular and flexible system with simple to install components.
The Power A Mark II's single control unit display provides a simple keypad touch programming with descriptive information regarding system configuration, tuning and diagnostics. The Power A Mark II is a system that can replace mechanical controls either on fully mechanical motors or on dfully electronic motors, or on motors with the combination of both characteristics.

Technical characteristics:

Single lever/double function and double lever/ dual function for shifting, throttle and trolling
Up to 4 control stations
Power:min 9 max 32 V
Operating temperature: -25°C to +75°C
Control station functions:

- Selection of the station
br>
- Engine warm-up

- High idling

- Docking

- Engine synchronization

- Trail valve
- Electronic throttle outputs:
  - Voltage (dual output 0 - 5V and 0 - 2.5V)
  
  - PWM (0-100%, frequency from 200Hz to 1kHz)
  
  - Current (4 - 10 mA)
  
  Digital throttle output:
  
  - SAE J 1939
  
  - NMEA 2000
  
  Control valve output
  
  - Voltage (0 - 5 V)
  
  - PWM (0-100%, frequency 100 Hz to 1 kHz)
  
  - Current (4 - 20 mA)
  
  Control electric gear shift:

- 2 or 3 ON/OFF or proportional solenoids

- Fully adjustable shift delays

Safety devices:

Start protection in gear (start inhibition with gear change)
Audible and visual diagnostic alarm in the event of a fault (READABLE RMESSAGES ON THE CONTROL UNIT DISPLAY)
Proportional gear change delays
Programmable working parameters
Complies with CEI EN 60945 standards

EMC certification and CE MARK
Complies with:
=

IEC EN60945
UNI-EN ISO 11547

COMPATIBILITY WITH ALL MECHANICAL THROTTLE ENGINES

COMPATIBILITY WITH TOUS ELECTRONIC THROTTLE ENGINES

Cummins, Detroit Diesel, Scania, Iveco, FPT, Lombardini, VM Motori, FNM, Yanmar, CMD-Volkswagen, Hyundai ecc.

The Power A Mark II electronic system actuators cannot be installed in rooms where ignition prevention devices are required.

Power A Mark II 42010R Unique Electronic Control Device with Trim Function Easy-to-install PowerA Mark II control system provides fingertip actuation of the throttle and shift lever. This single or dual function control system uses reliable and precise digital data transmission and is specifically designed to operate on mechanical, electronic and electro-hydraulic gas and diesel inboard engines, marine external drives and outboard engines. -edge.
PRODUCT ID: 45996
SKU: NVN-45996
CSKU: CWR-45996
REWRITE: 57107-uflex-power-a-mark-ii-single-engine
MPN: 42010R
UPC: 702755040187
ASIN: B009R5JC94
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: UFlex Power A Mark II Single Motor Control Head with Trim
EX_NAME: UFLEX POWER A PA2-B1T SINGLE LEVER CONTROL WITH TRIM
PTILER: UFlex Power A Mark II Single Engine Control Head with Trim
TYPE: Boat Equipment | Engine Controls
SELLER: Uflex USA
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES> POWERWATER STEERING PARTS
Sports
uflex Power A Mark II Single Motor Control Head with Trim
Power A Mark II 42010R Electronic Single Control with Trim
Sports
Gtags:

GSpecs:

UFlex Power A Mark II Single Motor Control Head with Trim Product Description Power A Mark II
Electronic Control System - Single Motor with Trim

The easy to operate Power A install The Mark II control system provides fingertip operation of the throttle and shift levers.
Using reliable and precise digital data transmission, this single or dual function control system is specifically designed to operate on mechanically controlled as well as electronic and electro-hydraulic gas and electro-hydraulic inboard, sterndrive and outboard engines. diesel.
The Power A Mark II is packed with features, including Dock Assist, which provides the operator with the ability to reduce the sensitivity of the throttle function for easier dock handling.
Others Standard features include rev synchronization, which reduces engine vibration. and improve the economyie fuel, a high idle function to increase rpm where a higher idle is needed for cold engine operation, programmable trolling valve control and neutral warm-up.
The sleek, ergonomic control makes the Power A Mark II suitable for many types of applications ranging from sport boats, yachts and commercial applications. Available with and without trim, the control features audible and visual interfaces that alert the operator of the current status of the control system.
With the ability to control up to 2 motors from 4 different stations, the Power A Mark II is a modular and flexible system with simple to install components.
The Single Control The Power A Mark II's unit display provides simple touchpad programming with descriptive information regarding system configuration, tuning and diagnostics. The Power A Mark II is un system that can replace mechanical controls or fully mechanical controls. motors, or on fully electronic motors, or on motors combining both characteristics.

Technical characteristics:

Single/double function and double lever Lever/dual function for shifting, throttle and trolling
Up to 4 control stations
Power: min 9 max 32V
Operating temperature: -25°C to +75°C
Control station functions:
- Station selection

- Engine Warm-up

- High Idle

- Docking

- Engine Timing

- Trolling Valve
- Electronic throttle outputs:
  - Voltage (dual output 0 - 5V and 0 - 2.5V)
  
  - PWM (0-100%, frequency 200Hz to 1kHz)
  
  - Current (4 - 10mA)
  
  Digital throttle output:
  
  - SAE J 1939
  
  - NMEA 2000
  
  Control valve output
  
  - Voltage (0 - 5 V) )
  
  - PWM (0 -100%, frequency from 100 Hz to 1 kHz)
  
  - Current (4 - 20 mA)
  
  Electric gear shift control:

- 2 or 3 ON/OFF or proportional solenoids

- Fully adjustable shift delays

Safety devices:

Start PROTECTION in gear (start inhibition with gear change)
Audible and visual diagnostic alarm (READABLE MESSAGES ON THE CONTROL SCREEN)
Proportional speed change delays
Programmable working parameters
Complies with CEI EN 60945 standards

EMC certification and CE MARK
Compliant with:
=

CEI EN60945
UNI-EN ISO 11547

COMPATIBILITY WITH ALLENGINES WITH MECHANICAL THROTTLE

COMPATIBILITY WITH ALL ENGINES WITH ELECTRONIC THROTTLE

Cummins, Detroit Diesel, Scania, Iveco, FPT, Lombardini, VM Motori, FNM, Yanmar, CMD-Volkswagen , Hyundai ecc.

Power A Mark II electronic system actuators cannot be installed in rooms where anti-ignition devices are required.

Power A Mark II 42010R Unique electronic control device with trim function The easy-to-install PowerA Mark II control system provides fingertip operation of the accelerator and shift lever. This single-function or dual-function control system uses reliable and precise digital data transmission and is specifically designed to operate on inboard gas and diesel mechanical, electronic and electro-hydraulic engines, marine external drives and outboard engines.

Frequently asked questions (FAQ)about UFlex Power A Mark II Single Motor Control Head with Trim Who is Uflex USA?
How to describe UFlex Power A Mark II Single Motor Control Head with /Trim?
Who is Uflex USA ? UfLex's commitment to providing the highest quality products and services is matched only by its commitment to developing new products using the latest materials and technologies to enhance the customer's browsing experience. From steering wheels to sophisticated electronic controls, Uflex USA has everything you need to ensure your boat will look and perform its best for many, many years. How to describe the UFlex Power A Mark II Single Motor Control Head with Trim? Power A Mark II 42010R electronic sin Trim control device with trim function The easy-to-install PowerA Mark II control system provides fingertip operation of the throttle and shift leversses. This single-function or dual-function control system uses reliable and precise digital data transmission and is specifically designed to operate on inboard gas and diesel mechanical, electronic and electro-hydraulic engines, marine external drives and outboard engines. -board.

Power A Mark II& 153; Electronic control system provides fingertip operation of the throttle and shift levers.
Single motor with trim design for easy installation and maintenance.
Digital data transmission ensures reliability and precision of control

Easy to install
Fingertip control of throttle levers and speed change
Reliable and precise digital data transmission

Control system for single-engine aircraft.
Allows to operate the access levers at your fingertipslever and gear shift.
Easy to install.

Save $531 on the purchase of the UFlex Power A Mark II Single Engine Control Head with Trim for only $1,139 from NVN Marine! Free same day delivery before 3 p.m. UFlex Power A Mark II Single Motor Control Head with Trim Videos UFlex Power A Mark II Single Motor Control Head with Trim Technical Specifications

Type:	Boat layout \| Motor Controls
Seller:	Uflex USA
Weight:	3.4 lbs
User Guide:	Download PDF
Product brochure:	Download PDF

UFlex Power A Mark II Single Motor Control Head with Trim User ReviewsUFlex Power A Single Motor Control HeadMark II with Trim Shipping & Returns

Shipping Weight:	3.4 lbs
Box sizes:	5.00 (h) x 8.00 (w) x 9.00 (w)
Cubic feet:	360.0
Returnable:	Yes

For detailed shipping terms, please see our shipping policy and you can find our shipping policy return and refund here.