Victron Orion-TR intelligent isolated DC-DC converter - 24 VDC to 24 VDC - 400 W - 17 A Bestsellers

Orion-TR Smart Isolated DC-DC Converter - 24 VDC to 24 VDC - 400 W - 17 AMP

The Orion-Tr Smart DC-DC Charger is a charger Professional DC-DC 3-level adaptive charger to DC with built-in Bluetooth.

Bluetooth Smart enabled:

Any smartphone, tablet, or other device can be used to monitor, change settings and update the charger when new software features become available.
Instant playback: The VictronConnect app can display key data, including warnings and alarms, on the device list. page without needing to log in to the product.

Fully programmable:

Battery charging algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charging algorithmpes: Bulk – Absorption – Float:
For lead acid batteries it is important that during shallow discharges the absorption time is kept short in case of overcharging of the battery . After deep discharge, the absorption time is automatically increased to ensure that the battery is fully recharged.
For lithium batteries, the absorption time is fixed (the default is 2 hours).
li> Alternatively, a fixed output voltage can be chosen.

Suitable for use in vehicles equipped with a smart alternator (Euro 5 and Euro 6 engines):

The Motor Stop Detection will shut down the converter when the motor is not running. This prevents unwanted discharge of the starter battery (see manual for details).

Remote on/off:

A remote on/off switch or arelay contact can be connected to a two-pole socket. connector. Alternatively, the H (right) terminal of the bipolar connector can be switched to battery plus, or the L (left) terminal of the bipolar connector can be switched to battery minus (or the chassis of a vehicle, for example). ).

All models are short circuit resistant and can be paralleled to increase output current:

An unlimited number of units can be connected in parallel.

Protected against high temperatures:

The output current will decrease at high ambient temperatures.

IP43 protection:

When installed with the screw terminals facing down.

Screw Terminals:

No special tools are required for installation.

Input fuse (non-replaceable)

Specifications:

Input voltage range: 20-35V
Undervoltage shutdown: 14 V
Undervoltage restart: 15 V
Rated output voltage: 24.2 V
li>
Setting range of output voltage: 20-30 V
Output voltage tolerance: +/- 0.2 V
Output noise: 2 mV rms
Continued. Output current at rated output voltage and 40 degrees C: 17 A
Maximum output current (10S) at rated output voltage: 25 A
Output current short circuit: 40A
Cont. Power output at 25 degrees C: 480 W
Cont. Output power at 40 degrees C: 400 W
Efficiency: 89%
No-load input current (2): <80 mA
No load current standby: less than 1 mA
Galvanic isolation: 200 V DC between input, output and enclosure
Operating temperature range: -20 to +55 degrees C ( 3% reduction per °Cabove 40°C )
Humidity: Max. 95% non-condensing
DC connection: screw terminals
Maximum cable size: 16 mm² AWG6
Weight: 1.6 kg (3.5 lbs) )
Dimensions (h x w x d) 130 x 186 x 70 mm (5.1 x 7.3 x 2.8 inches)
Protection category: IP43 (electronic components), IP22 (connection area)
Safety standards: EN 60950
Immunity standards: EN 61000-6-2, EN 61000-6-1, EN 55014-2
Automotive Directive Standards: ECE R10- 5

Please contact your dealer for any return, repair or support issues related to this product.

PRODUCT ID: 89167
SKU: NVN-89167
CSKU: CWR-89167
REWRITE: 100278-victron-orion-tr -intelligent isolated DC-DC converter
MPN: ORI242440120
UPC: 8719076047728
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU: NAME: VICTRON ORION-TR INTELLIGENT DC-DC CONVERTER 24-24V 17A 400W ISOLATED
NAME_EX:
PTITLE: Victron Orion-TR Smart Isolated DC-DC Converter - 24 VDC to 24 VDC - 400 W - 17 AMP
TYPE:
SELLER: Victron Energy

Gtags:

GSpecs:

Victron Orion-TR Intelligent Isolated DC-DC Converter - 24 VDC to 24 VDC - 400 W - 17 AMP Product Description

Orion-TR Intelligent Isolated DC-DC Converter - 24 VDC to 24 VDC - 400 W - 17 AMP

The Orion-Tr Smart DC-DC Charger is a professional 3-stage adaptive DC-DC charger with built-in Bluetooth.

Bluetooth Smart Enabled:

Any smartphone, tablet, or other Bluetooth-enabled device can be used to monitor, change settings, and update the charger when new software features become available.
Instant playback: The VictronConnect app can display key data, including warnings and alarms, on the device list page without the need to log in to the product.

Fully programmable:

Battery charging algorithm (configurable) or fixed output. Alternate Compatibilityintelligent sensor: mechanism for detecting the engine running.
3-step adaptive charging algorithm: Bulk – Absorption – Float:
For lead-acid batteries it is important that during discharges superficial, the absorption time is short to avoid overcharging the battery. After deep discharge, the absorption time is automatically increased to ensure that the battery is fully recharged.
For lithium batteries, the absorption time is fixed (the default is 2 hours).
li> Alternatively, a fixed output voltage can be chosen.

Suitable for use in vehicles equipped with a smart alternator (Euro 5 and Euro 6 engines):

The Motor Stop Detection will shut down the converter when the motor is not running. This prevents unwanted discharge of the starter battery (see manual for moredetails).

Remote On/Off:

A remote on/off switch or relay contact can be connected to a bipolar socket. connector. Alternatively, terminal H (right) of the bipolar connector can be switched to battery plus, or terminal L (left) of the bipolar connector.r can be switched to battery minus (or on the chassis of a vehicle for example) .

All models are short circuit resistant and can be paralleled to increase output current:

An unlimited number of units can be connected in parallel.

Protected against high temperatures:

The output current will decrease at high ambient temperatures.

IP43 protection:

When installed with the screw terminals facing down.

Screw terminals:

AuNo special tools are required for installation.

Input fuse (non-replaceable)

Specifications:

Input voltage range: 20-35V
Undervoltage shutdown: 14V
Undervoltage restart: 15V
Rated output voltage: 24.2V
li>
Output voltage setting range: 20-30V
Output voltage tolerance : +/- 0.2 V
Output noise: 2 mV rms
Cotn. Output current at rated output voltage and 40 degrees C: 17 A
Maximum output current (10 S) at rated output voltage: 25 A short circuit output: 40 A
Continued. Power output at 25 degrees C: 480 W
Cont. Output power at 40 degrees C: 400 W
Efficiency: 89%
No-load input current (2): <80 mA
No load current standby: less than 1 mA
Galvanic isolation: 200 V DC between lInlet, outlet and housing
Operating temperature range: -20 to +55 degrees C (3% reduction per °C above 40°C)
Humidity: Max. 95% non-condensing
DC connection: screw terminals
Maximum cable size: 16 mm² AWG6
Weight: 1.6 kg (3.5 lbs) )
Dimensions (h x w x d) 130 x 186 x 70 mm (5.1 x 7.3 x 2.8 inches)
Protection category: IP43 (electronic components), IP22 (connection area)
Safety standards: EN 60950
Immunity standards: EN 61000-6-2, EN 61000-6-1, EN 55014-2
StaNorms Automotive Directive: ECE R10-5

Please contact your dealer for any return, repair or support issues related to this product.

Save $43 when you purchase the Victron Orion-TR Smart Isolated DC-DC Converter - 24 VDC to 24 VDC - 400 W - 17 AMPfor only $243b> from NVN Marine! Same day shippingbefore 3 p.m. Victron Orion-TR Smart Isolated DC-DC Converter - 24 VDC to 24 VDC - 400 W - 17 AMP Technical specifications

Supplier:	Victron Energy
Weight:	3.8 lbs

Victron Orion-TR Smart Isolated DC-DC Converter - 24 VDC to 24 VDC - 400 W - 17 AMP Shipping Weight:

3.8 lb

Box sizes:

(h) x (l) x (w)

Cubic feet:

To know detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.