Victron SmartSolar MPPT VE CAN 250V-100A with VE.CAN port Electrical
SmartSolar MPPT VE CAN 250V-100A with VE.CAN port
The VE.Can SmartSolar MPPT charger uses the latest and fastest technology to convert energy from a solar panel into energy that optimally charges batteries.
The SmartSolar charge controller will recharge even a severely depleted battery. It can operate with battery voltage as low as 0 Volt, provided the cells are not sulfated or permanently damaged.
MPPT: Ultra Fast Maximum Power Point Tracking
The VE.Can SmartSolar MPPT charger connects to a 150 or 250 Volt Voc photovoltaic generator and will automatically detect and charge your 12, 24 or 48 V battery with a current ranging from 70 to 100 A depending on model.
Charging settings are fully programmable and can even be configured for different battery chemistries, coeven lead, lithium and others.
Control your charger remotely
The VE.Can SmartSolar MPPT charger can be remotely controlled and configured via Bluetooth via the VictronConnect app. This allows configuration, management and access to information at a glance, such as battery voltage and current, PV voltage and current, and historical data.
Additional daisy chain units
The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows communication with additional VE.Can SmartSolar chargers. The additional units are simply "daisy chained" to each other with a single RJ45 cable between the individual units.
When connected to each other, all individual VE.Can SmartSolar chargers will synchronize their charging stages. They can also send their data, via a single cable, to aGX monitoring device.
Remote monitoring and control
If the GX device is connected to the Internet, the Victron Remote Management Portal (VRM) allows to access the full power of your solar charger(s). For remote installations - even when there is no internet connection. Nearby Connection - you may be able to monitor your MPPT by connecting the GlobalLink 520.
SmartSolar Control Screen
The VE.Can SmartSolar charger is also equipped with a VE.Direct Port like our other MPPT solar chargers. This port can be for monitoring a single unit or controlling street lighting. The remote on/off connector can be controlled externally by a third-party device such as a lithium battery. An optional plug-in LCD display/control provides live data, configuration and management, directly from the front of the device.
PRODUCT ID: 91819
SKU: NVN-91819
CSKU: CWR-91819
REWRITE: 102930-victron-smartsolar-mppt-ve-can-250v-100a-w-ve-can
MPN: SCC125110412
UPC: 8719076055662
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Victron SmartSolar MPPT VE CAN 250V-100A with VE.CAN port
br>NAME_EX: VICTRONSMARTSOLAR MPPT VE CAN 250V-100A WITH VE.CAN PORT
PTITLE: Victron SmartSolar MPPT VE CAN 250V-100A with VE.CAN port
TYPE: Electric | Battery Chargers
SELLER: Victron Energy
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
Gtags:
GSpecs:
Victron SmartSolar MPPT VE CAN 250 V-100 A with VE.CAN port Product description
SmartSolar MPPT VE CAN 250 V-100 A with VE.CAN port
The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar panel into energy that optimally charges batteries.
SmartSolar charge controller will charge even a seriously exhausted battery. It can operate with battery voltage as low as 0 Volt, provided the cells are not sulfated or permanently damaged.
MPPT: Ultra Fast Maximum Power Point Tracking
The VE.Can SmartSolar MPPT charger connects to a 150 or 250 Volt Voc photovoltaic generator and will automatically detect and charge your 12, 24 or 48 V battery with a current ranging from 70 to 100 A depending on the model.
Charging settings are fully programmable and can becan even be configured for different battery chemistries, like lead, lithium and others.
Control your chargerRemotely
The MPPT VE.Can SmartSolar charger can be controlled and configured remotely via Bluetooth via the VictronConnect app. This allows configuration, management and access to information at a glance, such as battery voltage and current, PV voltage and current, and historical data.
Additional daisy chain units
The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows communication with additional VE.Can SmartSolar chargers. The additional units are simply "daisy chained" to each other with a single RJ45 cable between the individual units.
When connected to each other, all individual VE.Can SmartSolar chargers will synchronize their stages load. They can also send their data, via a single cable, to a GX monitoring device.
Remote monitoring and control
If the GX device is connected On the Internet, the Victron remote management portal (VRM) gives access to all the power of your solar charger(s). For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting the GlobalLink 520.
SmartSolar Control Screen
The VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for monitoring a single unit or controlling street lighting. The remote on/off connector can be controlled externally by a third-party device such as a lithium battery. An optional plug-in LCD display/control provides live data, configuration andmanagement, directly from the front of the device.
Frequently Asked Questions ( FAQ) about Victron SmartSolar MPPT VE CAN 250V-100A with VE.CAN port Who is Victron Energy?
Who is Victron Energy? Victron Energy is a global company renowned for its technical innovation, reliability and build quality. Victron products, which excel at efficiently combining two or more distinct energy sources, are recognized internationally as the professional choice for resilient energy storage systems. Victron products include sine wave inverters, sine wave inverters/chargers, battery chargers, DC/DC converters, transfer switches, battery monitors and much more.
Save $108 with the purchase of the Victron SmartSolar MPPT VE CAN 250V-100A with VE.CAN port for only $612 from NVN Marine! Free same day delivery before 3 p.m. Victron SmartSolar MPPT VE CAN 250V-100A with VE.CAN port Technical Specifications
| Type: | Electric | Battery chargers |
|---|---|
| Supplier: | Victron Energy |
| Weight: | 12.4 lbs |
| Shipping Weight: | 12.4 lb |
|---|---|
| Box sizes: | 7.00 (h) x 12.00 (w) x 13.00 ( l) |
| Cubic feet: | 1092.0 |
For detailed shipping terms, please see our shipping policyion and you can find our return and refund policy here.
- Victron SmartSolar MPPT Solar Charge Controller - 250V - 70A - UL Approved
- Victron SmartSolar MPPT charge controller - 75 V - 15 A
- Victron SmartSolar MPPT charge controller - 75 V - 10 A
- Victron SmartSolar MPPT charge controller - 150 V - 60 A
- Victron SmartSolar MPPT charge controller - 150 V - 100 A
- Victron SmartSolar MPPT charge controller - 100 V - 50 A
- Victron SmartSolar MPPT charge controller - 100 V - 30 A
