1.5A Guest Maintenance Charger Electrical
Guest On-Board battery chargers have been completely redesigned with the customer in mind. Our next generation onboard marine battery chargers include cutting-edge advancements in digital charging technology and waterproof design/construction. Each Guest charger has dedicated charging, sensing and control per bank. Easy-to-read graphs indicate the status of each battery bank throughout the charging process.
Marinco 2701A Attributes- Number of Banks: 1
- Application: 12 Volt AGM/Flooded Lead Acid Batteries
- Output Voltage: 12 Volts
- Input Voltage: 120 Volts
- Rated Current: 1.5 Amps supported
- Number of stages: Multi-stage
- Universality: Fully universal
- Width (IN): 5 inches
- Height (IN): 5.8 inches
- All high-end digital charging technologyfrequency
- Fully automatic performance charging in 5 stages
- Dedicated battery charging, sensing and control by bank
- Extended LED charging status monitor
- li>
- Wiring and battery fault detection
- Auto-maintain power saving mode
- Up Up to 40% lighter
- For all 12 volt flooded lead acid and AGM batteries
- All models are pre-wired for easy installation
- 2 year limited warranty
- li>
- 2701A_TCHDAT_install.pdf
- 2701A_TCHDAT_drawing.pdf
1.5A maintenance charger
Keeps your battery charged.
Features:
- 120V AC input, 1.5A, 12V DC output
- Can be used as a portable or mounted maintainer
- Mode maintenance starts charging the battery when itdrops below 12.8V
- br>
- Protected against short circuit, reverse polarity and temperature
- Includes ring terminals and quick disconnect clamps
- cETLus certified to cUL1236, CEC
This This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), known to the State of California to cause cancer and birth defects or other reproductive harm. For more information,
This highly reliable 1.5A guest maintainer charges your battery. Use precise output voltage to extend battery life and charge, monitor and recharge your phone.
PRODUCT ID: 63183
SKU: NVN-63183
CSKU: CWR-63183
REWRITE: 74294-guest- Maintenance Charger 1-5a
MPN: 2701A
UPC: 046904903962
ASIN:
WSKU: GUE2701A
SSKU:
KSKU: M1D2701A
GSKU:
MSKU:
LSKU: 85-2701A
NAME: 1.5A Guest Maintenance Charger
EX_NAME: GUEST 1.5A Maintenance Charger .5 AMP
PTITLE: 1.5 Amp Guest Maintenance Charger
TYPE: Electric | Battery Chargers
SELLER: Guest
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
Marinco 2701a 1.5 Amp Guest Battery Maintainer, Other
Gtags:
Marinco |
GSpecs:
1.5A Guest Maintenance Charger Product Description
Guest Onboard Battery Chargers have been redesigned from the inside out with the customer in mind. Our next generation onboard marine battery chargers include cutting-edge advancements in digital charging technology and waterproof design/construction. Each Guest charger has dedicated charging, sensing and control per bank. Easy-to-read graphs indicate the status of each battery bank throughout the charging process.
Marinco 2701A Attributes- Number of Banks: 1
- Application: 12 Volt Flooded AGM/Lead-Acid Batteries
- Output voltage: 12 Volts
- Input voltage: 120 Volts
- Current rating: 1.5A load
- Number of stages: Multi-stage
- Universality: Fully universal
- Width ( IN): 5 inches
- Height (IN): 5.8 inches
- All high frequency digital charging technology
- Fully automatic 5-stage performance charging
- Dedicated battery charging , detection and control by bank
- Extended LED charging status monitor
- Wiring and battery fault detection
- Power saving mode self-maintaining
- Up to 40% lighter
- For all 12 volt flooded lead acid and AGM batteries
- All models are pre-wired to easy installation
- 2-year limited warranty
- 2701A_TCHDAT_install.pdf
- 2701A_TCHDAT_drawing.pdf
1.5A Maintenance Charger
Keeps your battery charged.
Features:
- 120V AC Input, 1.5A, 12V DC Output
- Can be used as a portable maintainer or mounted
- Maintenance mode starts charging the battery when it drops below 12.8V
- Short circuit, reverse polarity and temperature protection
- Includes ring terminals and quick disconnect clamps
- cETLus certified to cUL1236, CEC
WARNING : This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), which is known to the State of California to cause cancer, birth defects, or other harm reproduction. For more information,
This highly reliable 1.5A guest maintainer charges your battery.Use precise voltage output to extend battery life and charge, monitor and recharge your phone.
Frequently Asked Questions (FAQ) about the Guest 1.5 A Maintenance Charger Who is the Guest?
How to describe the Guest 1.5 A Maintenance Charger?
What is the warranty policy for Guest 1.5 A maintenance charger?
What is the working volume of the product?
What is the working voltage of the product?
What is the product type? ?
Is this product portable?
How many banks can charge this product?
What is the weight of the product?
What is the amperage of the product?
What is the output voltage?
Is this product ISO approved?
How many banks support charging?
What is the input voltage?
What is the output voltage?
Who is the guest? Guest manufactures electrical products that withstand the environmentt rigorous sailor. Every product manufactured, from heavy-duty battery chargers and switches to a wide range of lights and floodlights, is designed to withstand the rigors of life on the water. Guest designs each product to rigorous performance specifications, including MARINE UL and CUL listings for an added margin of safety. And as one of the world's leading manufacturers of battery chargers and maintainers, Guest offers a comprehensive product line to meet virtually any application. How to describe the Guest 1.5A maintenance charger? This highly reliable 1.5A Guest maintainer charges your battery. Use precise output voltage to extend battery life and charge, monitor and recharge your phone. What is the warranty policy for the Guest 1.5A Maintenance Charger? Three years
- What is the operating voltagement of the product? 12 Volts DCWhat is the operating voltage of the product? 120What is the type of product? ChargerIs this product portable? NoHow many banks can charge this product? 1 BankWhat is the weight of the product? 3.75What is the amperage of the product? 1.5 ampsWhat is the output voltage? 12vIs this product ISO approved? UL 1236 and CSA standards
cETLusHow many banks cover the fees? 1What is the input voltage? 120vWhat is the output voltage? 1.5A
Save $20when you purchase the 1.5A Guest Maintenance Chargerfor only $27at NVN Marine! Same day dispatch before 3 p.m. 1.5A Guest Maintenance Charger Technical Specifications
Type: | Electric | Battery Chargers |
---|---|
Seller: | Guest |
Weight: | 3.4 lbs |
EnCharger output - Voltage: | 120v |
Portable: | No |
Recharge banks: | 1 |
Charger Output - Amps: | 1.5a |
Charger Output Voltage: | 12 V |
Product manual: | Download PDF |
Shipping Weight: | 3.4 lbs |
---|---|
Box sizes: | 4.00 ( h) x 8.00 (l) x 9.00 (l) |
Cubic feet: | 288.0 |
Returnable: | Yes |
P65 : | Yes |
For detailed shipping terms, please see our shipping policy and you can findSee our returns and refund policy here.
- GROWL! 32 oz Boat Cleaner - Removes Rust and Waterline Stains
- GROWL! 16 oz Boat Cleaner - Removes Rust and Waterline Stains
- GROCO WSA-751 Stainless Steel Basket for WSA-500 WSA-750 WSB-500 and WSB-750
- GROCO WSA-1251 Stainless Steel Basket for WSA-1250 and WSB-1250
- GROCO WSA-1001 Stainless Steel Basket for WSA-1000 and WSB-1000
- GROCO U-Lube Cartridge - 3oz. *Pack of 2
- GROCO Thru-Hull Installation Tool