Airmar B75C-0-M 0d Medium Tilt CHIRP Humminbird 9-Pin Cable Airmar
Airmar B75C, 0° Tilt Element, Medium CHIRP Bronze Through-Head Shell with 9-Pin Humminbird Mix-N-Match Cable
Model: B75C-0-M-HB- Fast response depth and water temperature sensor
- 600W of power with a maximum depth of 274m (900')
- Mid frequency: 80 to 130 kHz
- Beam width of 24° to 16°
- Mid frequency provides good shallow water performance, bottom detail and performance deeper than the high frequency band
- Low profile, thru-hull housing provides good display resolution at high speeds when installed correctly
- Bronze housing for use in a fiberglass or wood hull
- Patented Xducer ID Technology
Airmar's low-profile, Chirp-ready transducer designs are the perfect complement to small boats such as center consoles. FunctionOperating over a frequency range of 80 to 130 kHz, the B75M offers up to 50 kHz of total bandwidth in a single installation. This transducer shows amazing bottom detail in shallow and medium depths down to 274 m(900').
When the transducer is installed almost flush with the hull, the tilt of the element corrects the deadrise of the hull, directing the beam directly downward. This ensures maximum echo return to the transducer and more accurate depth readings.
Specifications| Dead rise range | 0° to 7° |
| Hole Size | 70 mm (2-13/16"") |
| Case Material | Bronze |
| Deadrise | 0° to 7° |
| Maximum depth | 900 feet |
| Medium frequency | 80 to 130 kHz |
Box contents:
- B75C-0-M -MM
- MMC-HB cable
Airmar B75C 0° Tlted Element Medium CHIRP Bronze Thru Hull with 9-Pin Humminbird Mix-N-Match Cable
Model: B75C-0-M-HB- Fast response depth and water temperature sensor
- 600W power with depth maximum range of 274 m (900')
- Mid frequency: 80 to 130 kHz
- Beam width of 24° to 16°
- Mid frequency offers good shallow water performance, bottom detail and deeper performance than the high frequency band
- Low profile through-hole housing provides good display resolution at high speeds when installed correctly
- Bronze housing for use in fiberglass or wood hull
- li>
- Patented Xducer ID technology
Airmar's low-profile, Chirp-ready transducer models arethe perfect complement to small boats such as center consoles. Operating over a frequency range of 80 to 130 kHz, the B75M offers up to 50 kHz of total bandwidth in a single installation. This transducer shows amazing bottom detail at shallow and medium depths up to 274 m (900').
When the transducer is installed almost flush with the hull, the tilt of the element corrects the dead center of the hull, directing the beam directly downward. This ensures maximum echo return to the transducer and more accurate depth readings.
Specifications| Dead rise range | 0° to 7° |
| Hole Size | 70 mm (2-13/16"") |
| Case Material | Bronze |
| Deadrise | 0° to 7° |
| Profmaximum waveform | 900 feet |
| Medium frequency | 80 to 130 kHz |
Box contents:
- B75C-0-M-MM
- MMC-HB cable
Save $89 when you purchase the Airmar B75C-0-M 0d Tilt Medium CHIRP Humminbird 9-Pin Ccapable for only $741 from NVN Marine! Same day dispatch before 3 p.m. Airmar B75C-0-M 0d Tilt Medium CHIRP Humminbird 9-Pin Cable Technical Specifications
| Type: | Navigation & Marine Instruments | Transducers |
|---|---|
| Supplier: | Airmar |
| Weight: | 5.0 lbs |
| Shipping Weight: | 5.0 lbs |
|---|---|
| Tbox widths: | (h) x (l) x (w) |
| Cubic feet: | 0 |
For detailed shipping terms, please see our Shipping Policy and you can find our return and our reference and Policy here.
- Airmar B75C-0-M 0d Medium Tilt CHIRP Humminbird 14 Pin Cable
- Garmin 8-pin Airmar B75C-0-M 0d Medium Tilt CHIRP Cable
- Airmar B75C-0-M 0d Tilt Medium CHIRP Garmin 12 pin cable
- Airmar B75C-0-M 0d Tilt Medium CHIRP Fuuno 10 pin cable
- Airmar B75C-0-M 0d Medium Tilt Cable CHIRP Furuno 12 Pin
- Airmar B75C-0-M 0d Tilt Medium CHIRP Bare Wire Cable
- Airmar B75C-0-L 0d Tilt with 8-Pin Si-Tex Cable
