Automatic disconnection of the Blue Sea 7615 ATD timer Electrical

When the signal is removed, the timer is activated and will disconnect the devices after a preset duration. The 12 volt signal triggers the relay to connect battery power to the devices. Once the 12 volt signal is removed, the device detects low battery voltage and automatically disconnects the devices. The low voltage setting can be used in conjunction with the disconnect timer. Low voltage will disconnect devices before the preset time to preserve battery power. Automatically combines two batteries when charging and isolates them when discharging. Single side sensing design only monitors starting battery voltage. Ideal for AGM auxiliary batteries or significantly larger than the starter battery.

Blue Sea 7615BSS Attributes

Type: Key
Activation type: Automatic
Continuous current rating (A): 120 Amp
Surge Current Rating (A): 210 Amp
Base Diameter (IN): Not Applicable

Blue Sea 7615BSS Features and Benefits

Relay 12 volt signal trigger To connect battery power to devices
Timer ranges from 15 minutes to 4 hours
12 volt signal will connect or disconnect the relay without any delay
Automatically combines two Batteries when charging and isolates them when discharging
No supplier warranty

Blue Sea 7615BSS Installation Instructions

980025450.pdf

Blue Sea 7615BSS Technical Bulletins

7615.pdf

ATD Timer Auto Disconnect

Adjustable time or voltage based battery Disconnect automatically turns off devices to conserve battery power.

The 12V signal triggers the relay to connect battery power to thedevices. When the signal is removed, the timer is activated and will disconnect devices after a preset time
Disconnect can be triggered based on time, low voltage or removal of 12V signal
Low voltage will disconnect if time has not been reached to preserve battery power
Time and voltage optionConnectors can be disabled to allow disconnection based on 12V signal
Snap-on cover insulates terminal connections
One-piece stainless steel flange nuts ensure secure connections safe and secure
br>
Built-in LED indicates status

Specifications:

Rated voltage: 12 V DC
Operating current: 175 mA (combined / 15 mA (open)
Continuous Current Rating: 120A
Intermittent Duty: 210
Stud SizeTerminal No.: 3/8"-16 (M10)
Time Range: 15 minutes to 4 hours

This product can expose you to chemicals including di(2-ethylhexyl phthalate (dehp), which is known to the State of California to cause cancer and birth defects or other reproductive harm. More information, see the page at P65Warnings.ca.gov.

This is a 12 volt relay that can be configured to operate programmable. First, it can be configured as an independent 12 volt timer to disconnect After triggering the timer, it can connect the battery to the load for a pre-programmed time from 15 minutes to 4 hours. The trigger can be any signal. of 12 volts, or it can be set to be voltage sensitive. Then you can further modify this device function in settings.the six DIP switches on the back of the device, the three behaviors that can be customized for the ATD are connection time, disconnection voltage and load detection. It can be configured for use in combination with the following energy saving products: The timer disconnects the 12V signal to trigger the relay to connect battery power to the device. . The available increments are 0 seconds, 5 seconds, 15 minutes, 30 minutes, 1 hour, 1.5 hours, 2 hours and 4 hours. Low voltage disconnect detects low battery voltage and automatically disconnects the device. The low voltage setting can be used with the timer disconnection. Low voltage will disconnect the device before the preset time to save battery power. Available increments are 11 volts, 11.5 volts or 12 volts. If necessary, you can disable this feature. The automatic load relayAutomatically merges the two batteries when charging and isolates them when discharging. Single-sided induction design only monitors starting battery voltage. Very suitable for AGM or auxiliary battery larger than the starting battery. If necessary, you can disable this feature. The 12V solenoid valve signal will connect or disconnect the relay without any delay. This is achieved by setting the time delay to zero. There are many possibilities for fine-tuning the device. The best way to learn more is to read the instruction manual.
PRODUCT ID: 64363
SKU: NVN-64363
CSKU: CWR-64363
REWRITE: 75474-blue-sea -7615-atd -Automatic disconnection by timer
MPN: 7615
UPC: 632085076153
ASIN: B06XT6PDLZ
WSKU: BSS7615
SSKU: BS-7615
KSKU: B6Z7615BSS
GSKU:
MSKU:
LSKU: 661-7615
NAME: Blue Sea 7615 ATD Automatic Timer Disconnect
NAME_EX: BLUE SEA 7615 ATD AUTOMATIC TIMER DISCONNECTION
PTITLE: Blue Sea 7615 ATD Automatic Timer Disconnect
TYPE: Electric | Battery Management
SELLER: Blue Sea Systems
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES

Blue Automatic Charging Relays Sea Systems (ACR)
Blue Sea 7615 ATD Automatic Timer Disconnect - 7615

Gtags:

12 volts

GSpecs:

Blue Sea 7615 ATD Automatic Timer Disconnect Product Description

When the signal is removed, the timer is activated and will disconnect devices after a preset duration. The 12 volt signal triggers the relay to connect battery power to the devices. Once the 12 volt signal is removed, the device detects low battery voltage and automatically disconnects the devices. The low voltage setting can be used in conjunction with the disconnect timer. Low voltage will disconnect devices before the preset time to preserve battery power. Automatically combines two batteries when charging and isolates them when discharging. Single side sensing design only monitors starting battery voltage. Ideal for AGM auxiliary batteries or significantly larger than the starter battery.

Blue Sea 7615BSS Attributes

Type: Key
Activation type: Automatic
Ampere rated continuous (A): 120 A
OvervoltageRated current (A): 210 A
Base Diameter (IN): Not applicable

Blue Sea 7615BSS Features and Benefits

Relays 12 volt signal trigger to connect battery power to devices
Timer ranges from 15 minutes to 4 hours
The 12 volt signal will connect or disconnect the relay without no delay.
Automatically combines two batteries when charging and isolates them when discharging
No supplier warranty

Blue installation instructions Sea 7615BSS

980025450.pdf

Blue Sea 7615BSS Technical Bulletins

7615.pdf

Automatic disconnection of the ATD timer

Disconnectionbattery power based on adjustable time or voltage automatically turns off devices to conserve battery power

12V signal triggers relay to connect power to battery battery to devices. When the signal is removed, the timer is activated and will disconnect devices after a preset duration
Disconnect can be triggered based on time, low voltage or removal of 12V signal
Low voltage will disconnect if time has not been reached to preserve battery power
Time and voltage options can be disabled to allow disconnection based on 12V signal
Snap-on cover insulates terminal connections
Stainless steel flange nuts one piece ensure safety and secure connections
Built-in LED indicates status

Specifications:

Nominal Voltage: 12V DC
Operating Current: 175mA (combined / 15mA (open)
Continuous Current Rating: 120A
Intermittent Duty: 210
Terminal Stud Size: 3/8"-16 (M10)
Time range: 15 min to 4 hours

This product can expose you to chemicals including di( 2-ethylhexyl) (dehp), known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings.ca.gov.

This is a 12 volt relay that can be configured to operate programmably First, it can be configured as an independent 12 volt timer to disconnect After triggering the timer. , it can connect the battery to the load for a pre-programmed duration of 15 minutes to 4 hours.Trigger can be any 12 volt signal, or it can be set to be voltage sensitive. Then you can further change this device function in the settings. By adjusting the six DIP switches on the back of the device, the three behaviors that can be customized for the ATD are connection time, disconnection voltage and load detection. It can be configured for use in combination with the following energy saving products: The timer disconnects the 12V signal to trigger the relay to connect battery power to the device. . The available increments are 0 seconds, 5 seconds, 15 minutes, 30 minutes, 1 hour, 1.5 hours, 2 hours and 4 hours. Low voltage disconnect detects low battery voltage and automatically disconnects the device. The low voltage setting can be used with the timer disconnection. Low voltage disconnecthas the device before the preset time to save battery power. Available increments are 11 volts, 11.5 volts or 12 volts. If necessary, you can disable this feature. The automatic charging relay automatically merges the two batteries when charging and isolates them when discharging. Single-sided induction design only monitors starting battery voltage. Very suitable for AGM or auxiliary battery larger than the starting battery. If necessary, you can disable this feature. The 12V solenoid valve signal will connect or disconnect the relay without any delay. This is achieved by setting the time delay to zero. There are many possibilities for fine-tuning the device. The best way to find out more is to read the instruction manual.

Frequently asked questions (FAQ) about the automatic disconnection of the Blue Sea 7615 ATD timer Who is the Blue systemSeas?
How to describe the automatic disconnection of the Blue Sea 7615 ATD timer?
What is the product type?
What is the weight of the product?
What is the size?
Who is Blue Sea Systems? Blue Sea Systems is committed to improving marine electrical products and systems, such as panel systems, circuit breakers, connectors and insulators. Blue Sea aims to satisfy its distributors, resellers and ultimately its retail customers by designing and manufacturing electrical products designed to withstand the rigors of the marine environment. How to describe the automatic disconnection of the Blue Sea 7615 ATD timer? This is a 12 volt relay that can be configured to operate programmably. First, it can be configured as an independent 12 volt timer to disconnect. After triggering the timer, it can connect the battery to the load for a hardpre-programmed from 15 minutes to 4 hours. The trigger can be any 12 volt signal, or it can be set to be voltage sensitive.ge. Then you can further change this device function in the settings. By adjusting the six DIP switches on the back of the device, the three behaviors that can be customized for the ATD are connection time, disconnection voltage and load detection. It can be configured for use in combination with the following energy saving products: The timer disconnects the 12V signal to trigger the relay to connect battery power to the device. . The available increments are 0 seconds, 5 seconds, 15 minutes, 30 minutes, 1 hour, 1.5 hours, 2 hours and 4 hours. Low voltage disconnect detects low battery voltage and automatically disconnects the device. The low voltage setting can be used with the disconnection of the minutery. Low voltage will disconnect the device before the preset time to save battery power. Available increments are 11 volts, 11.5 volts or 12 volts. If necessary, you can disable this feature. The automatic charging relay automatically merges the two batteries when charging and isolates them when discharging. Single-sided induction design only monitors starting battery voltage. Very suitable for AGM or auxiliary battery larger than the starting battery. If necessary, you can disable this feature. The 12V solenoid valve signal will connect or disconnect the relay without any delay. This is achieved by setting the time delay to zero. There are many possibilities for fine-tuning the device. The best way to find out more is to read the instruction manual. What is the type of product? Key

$58

Blue Sea 7615 ATD Timer Auto Disconnect

$106

Type:	Electric \| Battery Management
Supplier:	Blue Sea Systems
Weight:	1.0 lbs
Product manual:	Download PDF

3.00 (h) x 6.00 (w) x 9.00 (w)

162.0

Yes

To know the shipping conditionsFor detailed instructions, please see our shipping policy and you can find our return and refund policy here.