Balmar ARS multi-stage regulator with harness - 12 V Electrical

Balmar ARS-5 Regulator High efficiency alternators are an important part of your system for battery maintenance, but they are certainly not the only part. Without proper voltage regulation, battery charging can be a slow process, or worse yet, an ideal process. recipe for early battery failure. All commercial alternators come with an internal rectifier/regulator circuit that: (1) converts the alternating current generated by the alternator to direct current and (2) fixes the output voltage at a static level - typically 14.6 volts. Internal regulators have several flaws: (1) Not all battery technologies want to receive 14.6 volts. (2) All types of batteries have an optimal charging "profile", meaning that they have different voltages and currents at different stages of their charging cycle, as well as variations as the temperature changes.e of the battery changes. (3) Once fully charged, batteries may overheat if supplied with DC power at a fixed charging voltage. Balmar's patented ARS-5 voltage regulators provide a dynamic method to monitor battery condition and apply the correct level of alternator control (voltage and current) to ensure your batteries are charged quickly and safely. During engine operation, Balmar regulators go through the following steps to ensure proper battery charging: Step 1: Start Delay: After starting the engine, the regulator waits several seconds before applying a field current to the alternator. This allows the engine and belts to warm up before the alternator load is applied. Step 2: Gentle Ramp: The governor slowly increases the excitation of the alternator field to reduce belt stress. EStep 3: Bulk Charge: The regulator increases the field output to the maximum safe level, allowing the alternator to reach the maximum output amperage based on the target limits of the battery type being charged. Target voltage ranges from 14.1V to 14.6V depending on the battery type selected (24V bulk charge voltages range from 28.2V to 29.2V).

Balmar Attributes ARS5H

User-selectable preset battery programs: Balmar provides multiple charging profiles to ensure optimal charging. Simply select the drum program that matches your drum technology
Advanced programming modes. Balmar multi-stage regulators feature a wide range of advanced regulator settings.
Alternator and battery temperature detection and control. Balmar multi-stage regulators have the capacitycited to automatically correct the load output
Load management by belt. Balmar multi-stage regulators can protect the engine and belt by allowing the user to reduce alternator power in small increments by adjusting the belt load manager.
If temperatures exceed safe operating levels, the ARS-5 voltage regulators will automatically reduce load outputs to avoid dangerous thermal runaway conditions.

ARS multi-stage regulator with harness - 12V

High efficiency alternators are an important part of your battery maintenance system, but they are certainly not the only one. Without proper voltage regulation, battery charging can be a slow process, or worse yet, a perfect recipe for early battery failure.

This productcannot be returned to the original point of purchase. Please contact the manufacturer directly with any problems or concerns.

Balmar ARS-5 Regulator High efficiency alternators are an important part of your system for battery maintenance, but they are certainly not the only one part. Without proper voltage regulation, battery charging can be a slow process, or worse yet, a perfect recipe for early battery failure. All commercial alternators come with an internal rectifier/regulator circuit that: (1) converts the alternating current generated by the alternator to direct current and (2) fixes the output voltage at a static level - typically 14.6 volts. Internal regulators have several flaws: (1) Not all battery technologies want to receive 14.6 volts. (2) All battery types have an optimal charging "profile", meaning they want different voltages and currents at different stages of their cycle.charging key, as well as variations when the battery temperature changes. (3) Once fully charged, batteries may overheat if supplied with DC power at a fixed charging voltage. Balmar's patented ARS-5 voltage regulators provide a dynamic method for monitoring battery condition and apply the correct level of alternator control (voltage and current) to ensure your batteries are charged quickly and safely . During engine operation, Balmar regulators go through the following steps to ensure proper battery charging: Step 1: Start Delay: After starting the engine, the regulator waits several seconds before applying a field current to the alternator. This allows the engine and belts to warm up before the alternator load is applied. Step 2: Gentle ramp: The regulator slowly increases the excitation of the champ from the alternator to reduce belt stress. Step 3: Bulk Charge: The regulator increases the field output to the maximum safe level, allowing the alternator to reach the maximum output amperage based on the target limits of the battery type being charged. The target voltage ranges from 14.1V to 14.6V depending on the battery type selected.ted (24V bulk charge voltages range from 28.2V to 29.2V).

User selectable Preset Battery Programs: Balmar provides multiple charging profiles to ensure optimal charging . Simply select the drum program that matches your drum technology
Advanced programming modes. Balmar multi-stage regulators feature a wide range of advanced regulator settings.
Detection and control of temperaturee the alternator and the battery. Balmar multi-stage regulators have the ability to automatically correct load output
Belt-based load management. Balmar multi-stage regulators can protect the engine and belt by allowing the user to reduce alternator power in small increments by adjusting the belt load manager.
If temperatures exceed safe operating levels, the ARS-5 voltage regulators will automatically reduce the load outputs to avoid any dangerous thermal runaway conditions.s

ARS Multi-Stage Regulator with Harness - 12V

High efficiency alternators are an important part of your battery maintenance system, but they are certainly not the only part . Without proper voltage regulation, battery charging can be a slow process, or worse incore, an ideal recipe for early battery failure.

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly with any problems or concerns.

Balmar

$31

Balmar ARS Multi-Stage Regulator with Harness - 12V

$264

Type:	Electric \| Alternators
Supplier:	Balmar
Weight:	1.2 lbs

Shipping Weight:	1.2 lbs
Box sizes:	4.00 (h) x 6.00 (w) x 8.00 (w)
Cubic feet:	192.0

For detailed shipping policy, please see our Shipping Policy and you can find our Return & Refund Policy here.