C.E. Smith Recessed Rod Holder - 15 Degree 10.5" Deep Hunting & Fishing

It is very important to have support plates under every rod holder used for heavy tackle fishing. When the rod holder is under extreme load, ordinary nuts and washers can concentrate the stress and cause cracks around your rod holders or possibly even tear, causing serious damage to the gunnel. Smith Backing Plates evenly distribute mounting bolt pressure over an area 30 times greater than standard washers alone. 2 sizes, one for the 70 series and 80 series rod holders. Each size adapts to the 3 models in the series.

C.E. Smith Company 53681CA Attributes

Style: Flush Mount
Holding Type: Cradle
Size: 1-7/8 inch ID X 10-1/2 inch length Tube
Finish: Polished
Color: Silver
Material: Stainless Steel

E.C. Smith Company 53681CA Features and Benefits

Useto hold a fishing rod
Use 1/4 inch stainless steel bolts and nuts
Made in the USA
316L stainless steel
1 year limited warranty

Stainless steel rod supports

With hole Threaded Drain Hole for 1/2" Pipe

These larger 80C Series models feature a beautifully rounded molded bottom end with a threaded drain hole for 1/2" pipe ". Use them when the bottom of the rod holder needs to have a decorative look, or add a drainage tube and use it when there is dry storage space under the rod holder.

They are Featuring a heavy-duty cast stainless steel gimbal bar designed to withstand the punishment of downriggers or heavy equipment. A white vinyl liner protects the rods and is attached to the gimbal so the liner stays in place

ANGLE:	15°
LENGTH:	10 -1/2"
I.D. :	1-7/8"

This product can expose you to hazardous materials chemicals, including di(2-ethylhexyl) phthalate (dehp), known to the State of California to cause cancer. Health or other reproductive harm For more information, go to. P65Warnings.ca.gov.

With threaded discharge hole for 1/2 inch pipe These larger 80C series models have an exquisite round bottom end with a threaded discharge hole for. 1/2 inch pipe When the bottom...use them
PRODUCT ID: 29091
SKU: NVN-29091
CSKU: CWR-29091
REWRITE: 40202-c-e-smith-flush-mount-rod-holder
MPN: 53681CA
UPC: 768296005566
ASIN:
WSKU:
SSKU:
KSKU: C9E53681CA
GSKU:
MSKU:
LSKU:
NAME: Flush Mount Rod Holderé C.E. Smith - 15 degrees 10.5" deep
EX_NAME: CE SMITH FLUSH MT STAINLESS SILVER ROD HOLDER 10.5" 15 DEG
PTITLE: C.E. Smith Flush Mount Rod Holder - 15 degrees 10, 5" deep
TYPE: Hunting & Fishing | Rod Holders
SELLER: C.E. Smith
SPORTING GOODS> OUTDOOR RECREATION> FISHING

Amazon Title :
CE Smith Flush 15 Degree 105 Depth Fishing Rod Holder by Hodges Marine

Gtags:

SMITH

GSpecs:

C.E. Smith Flush Mount Rod Holder - 15 Degree, 10.5" Deep Product Description

It is very important to have support plates under every rod holder used for heavy tackle fishing. When the rod holder is under extreme load, ordinary nuts and washers can concentrate the tension and cause cracks around your rod holders or possibly even tears, causing serious damage to the support plates. Smith distribute mounting bolt pressure evenly over 30 times more area than standard washers alone, one for 70 and 80 series rod holders. Each size fits all 3 models in the series.

C.E Smith Company 53681CA Attributes

Style: Flush Mount
Type. support: Cradle
Size: 1-7/8 Inner diameter in inches X Long tube10-1/2 inch gauge
Finish: Polished
Color: Silver
Material: Stainless steel

C.E. Smith Company 53681CA Features and Benefits

Use to hold a fishing rod
Use 1/4 inch stainless steel bolts and nuts
Made in USA
316L Stainless Steel
One Year Limited Warranty

Stainless Steel Rod Supports

With 1/2" threaded drain hole for hose

These larger 80C series models feature a beautifully molded bottom end rounded with a threaded drain hole for 1/2" pipe. Use them when the bottom of the rod holder needs to have a decorative look, or add a drainage tube and use it when there is dry storage space under the rod holder.

They are equipped with a carda barn Heavy-duty cast stainless steel designed to withstand the punishment of downriggers or heavy equipment. A white vinyl liner protects the rods and is attached to the gimbal so the liner stays in place

ANGLE:	15°
LENGTH:	10-1/2"
I.D.:	1-7/8"

This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), which is known to the State of California to cause cancer, birth defects or other reproductive problems. For more information,

With threaded discharge hole for 1/2 inch pipe. These larger 80C Series models have an exquisite round bottom end with a threaded discharge hole for 1/2 inch pipe. When the bottom... use them

C.E. Smith Flush Mount Rod Holder - 15 Degree, 10.5" Deep Related ProductsC.E. Smith Replacement Liner f/80 Series Flush Mount - White
C.E. Smith Backing Plate for Fishing Rod Holders 80 Series
Sika Sikaflex 291 Fast Curing Adhesive and Sealant 10.3 oz (300 ml) Cartridge - White
Sika Sikaflex 291 Fast Curing Adhesive and Sealant 10.3 oz (300 ml) Cartridge ml) - Black
Sika Sikaflex 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3 oz (300 ml) Cartridge - White
Sika Sikaflex 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3 oz (300 ml) Cartridge - Black
Sika Sikaflex 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3 oz Cartridge (300 ml) - Aluminum Grey
Sika Sikaflex 221 Multi-Purpose Polyurethane Sealant/Adhesive Uses - 10.3 oz (300 ml) Cartridge - Colonial White Frequently Asked Questions (FAQ) About the C.E. Smith Flush Mount Rod Holder - 15 Degree 10.5" deep Who is theree C.E. Smith?
How to describe the C.E. Smith Flush Mount Rod Holder - 15 Degree 10.5" Deep?
What is the material of the C.E. Smith Flush Mount Rod Holder - 15 Degree 10 .5" deep?
What is the size?
What is the color of the C.E. Smith Flush Mount Rod Holder - 15 Degree 10.5" Deep?
What is the style of the product?
How to mount or what is the mounting style of the C.E. Smith Recessed Rod Holder - 15 Degree 10.5" Deep?
What is the finish of the product?
What is the product finish? is the product angle?
Who is C.E. Smith? CE. Smithis committed to providing innovative products and excellent service to manufacturing and aftermarket customers. The entireC.E. The Smith team is dedicated to providing high-quality products and efficient, responsive service that customers deserve. How to describe the C.E. Smith Recessed Rod Holder - 15 Degree,10.5" deep ? With threaded discharge hole for 1/2 inch pipe. These larger 80C series models have an exquisite round bottom end with a threaded discharge hole for 1/2 inch pipe. When the bottom...use them What is the material of the C.E. Smith Recessed Rod Holder - 15 Degree 10.5" Deep? Stainless steel

C.E. Smith Flush Mount Rod Holder - 15 Degree 10.5" Deep

$164

Type:	Hunting & Fishing \| Rod Holders
Supplier:	C.E. Smith
Weight :	3.1 lbs
Angle:	15 degrees
Mounting style:	Flush-mounted

Shipping Weight:	3.1 lbs
Box sizes:	5.00 (h) x 6.00 (w) x 16.00 (w)
Cubic feet:	480.0
Returnable:	Yes
P65:	Yes

To knowDetailed shipping terms, please see our Shipping Policy and you can find our Return & Refund Policy here.