Icom M510BB Black Box VHF With HM195GB Black Communication

Icom M510BB Black Box VHF with Black CommandMic HM195GB

Model: M510 BB 21 USA

The Icom M510BB is perfect for boats that need AIS reception functionality without using valuable helm space. The supplied CommandMic™ provides all safety and communication functions for commercial and recreational boaters.

The M510BB consists of a CommandMic™ and a black box RF unit. Use the CommandMic™ for all operations, including DSC. Mount the RF unit out of sight, position it up to 60 feet (18.3 m)* from the CommandMic™.

Add up to two additional CommandMic™ microphones for boats requiring two or three communication stations. Extend communication points around the boat, including the cockpit, flybridge and tower. Access intercom functions for one-on-one or one-on-one communications on the boat.

The M510BB includes a built-in AIS receiver,perfect for remote station information via the CommandMic™, or integrated with the NMEA 2000 Bus to display radar and chartplotter information on an MFD (multi-function display).

In addition to the button DSC conveniently located on the back of each CommandMic™, the M510BB introduces a dedicated DSC remote control (EN 300 338-8 compatible). terminal, allowing connection to an external device to centralize control of emergency communications.

The M510BB has a last call voice recording function that automatically records up to two minutes of an incoming call.

The NMEA 2000 network provides plug-and-play data communication to interconnect other marine equipment such as an MFD (multi-function display). The radio can send AIS position, GNSS (GPS), DSC call and radio channels to other equipment.

On the back of each CommandMic™ is a conveniently located DSC button. OnceIf triggered, the M510BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel. *MMSI number must be obtained and programmed for each vessel/radio.

Built-in 15W amplifier augments audio output from an external speaker. The RX one-way hailer feature allows you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the bridge or tower. You can also emit foghorn signals from the bullhorn speaker.

The active noise cancellation feature digitally removes background noise from audio transmission and reception to provide clear communications in noisy maritime environments.

Specifications

General
Usable channels	USA, INT, CAN, WX
Power Requirements	13.8 V DC nominal (11.7 ~ 15.9 V DC) (negative ground)
Current drain (at 13.8 V DC)	TX Max. power - 5.5 A Max. RX Max. audio - 1.5 A (one CommandMic™) 4.5 A (three CommandMic™ and RX loudspeaker)
Operating temperature range	—20°C ~ 60°C, —4°F ~ 140°F
Antenna impedance	50 ohms nominal
Weight (approximately)	RF unit - 890 g; 2 lbs CommandMic™ - 400 g; 14.1 oz
Transmitter
Output Power (at 13.8V DC)	25W, 1W (high, low)
Max. frequency deviation	±5 kHz
Frequency tolerance	±0.5 kHz
Spurious emissions	Less than —70 dBc (high power), less than —56 dBc (low power)e power)
Residual modulation	More than 40 dB
Adjacent channel power	More than 70 dB
Receiver
FM sensitivity (at 12dB SINAD)	0.22 µV typical
DSC sensitivity (at 1% BER)	—7 dBµ emf typical
FM adjacent channel selectivity	More than 70 dB
DSC adjacent channel selectivity (1% BER)	More than 73 dBµ emf
FM spurious response	More than 70 dB
DSC spurious response (1% BER)	EMF greater than 73 dBµ
FM intermodulation	More of 75 dB
DSC intermodulation (1% BER)	More than 68 dBµ emf
Mood and noise	More than 40 dB

Box contents:

IC-M510BB
DC power cable (2 m)
Microphone holder
Connection cable, OPC-1540 (6.1 m, 20 ft)
CommandMic™, HM-195GB
Connector cap
Mounting base

Icom M510BB Black Box VHF with HM195GB black Product description

icom M510BB Black Box VHF with HM195GB Black CommandMic

Model: M510 BB 21 USA

The M510BB from Icom is perfect for boats that need AIS functionality without taking up valuable space at the helm. The supplied CommandMic™ provides all safety and communication functions for commercial and recreational boaters.

Add up to two additional CommandMic™ microphones for boats requiring two or three communication stations. Extend communication points around the boat, including the cockpit, flybridge and tower. Access intercom features for one-on-one or one-on-one communicationson the boat.

The M510BB includes a built-in AIS receiver, perfect for remote station information via the CommandMic™, or the built-in NMEA 2000 bus to display radar information and of the chartplotter on an MFD (multifunction display).

In addition to the DSC button conveniently located on the rear of each CommandMic™, the M510BB introduces a dedicated DSC remote control terminal (EN 300 338-compliant). 8), allowing connection to an external device to centralize control of emergency communications.

The M510BB has a last call voice recording function to automatically save up to two minutes. of an incoming call.

On the backInside each CommandMic™ is a conveniently located DSC button. Once triggered, the M510BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel. *MMSI number must be obtained and programmed for each vessel/radio.

Built-in 15W amplifier boosts audio output from an external speaker. The RX one-way hailer feature allows you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the bridge or tower. You can also emit foghorn signals from the bullhorn speaker.

The active noise cancellation feature digitally removes background noise from audio transmission and reception to provide clear communications in noisy maritime environments.

Specifications
Humming and noise

General
Usable channels	USA, INT, CAN, WX channels
Power required	13.8 V DC nominal (11.7 ~ 15.9 V DC) (negative ground)
Current drain (at 13 .8 V DC)	TX Max. power - 5.5 A Max. RX Max. audio - 1.5 A (one CommandMic™) 4.5 A (three CommandMic™ and RX loudspeaker)
Operating temperature range	—20°C ~ 60°C, —4°F ~ 140°F
Antenna impedance	50 ohms nominal
Weight (approximately)	RF unit - 890 g; 2 lbs CommandMic™ - 400 g; 14.1 oz
Transmitter
Output Power (at 13.8V DC)	25W, 1W (high, low)
Max. frequency deviation	±5 kHz
Frequency tolerance	±0.5 kHz
Paratro broadcastsites	Less than —70 dBc (high power), less than —56 dBc (low power)
Residual modulation	td>	More than 40 dB
Adjacent channel power	More than 70 dB
Receiver
FM sensitivity (at 12dB SINAD)	0.22 µV typical
DSC sensitivity (unt 1% BER)	—7 dBµ emf typical
FM adjacent channel selectivity	More than 70 dB
DSC adjacent channel selectivity (1% BER)	More than 73 dBµ emf
FM spurious response	More than 70 dB
DSC spurious response (1% BER)	More than 73 dBµ emf
FM intermodulation	More than 75 dB
DSC intermodulation (1% BER)	More than 68 dBµ emf
More than 40 dB

What's in the box:

IC-M510BB
DC power cable (2 m)
Microphone holder
Connection cable, OPC-1540 (6, 1 m, 20 ft)
CommandMic™, HM-195GB
Connector cap
Mounting base

$449

Icom M510BB VHF Black Box with HM195GB Black

$799

Type:	Communication \| VHF - Fixed mounting
Supplier:	Icom
Weight:	5.0 lbs

Shipping Weight:	5.0 lbs
Box Sizes:	1.00 (h) x 1.00 (w) x 1.00 (w)
Cubic feet:	1.0
Returnable:	Yes
USPS First Class:	Yes
P65:	Yes

For detailed shipping terms, please see our shipping policy and you can find our return and refund policy here .