Lenco 12" x 12" Electropolished Edge Mount Trim Tab Kit Boat Outfitting

Electropolished Edge Mount Trim Tab Kit, 12 Gauge Blades / 12 Volt Actuators Trim tabs make the most important difference in how your boat rides and operates. They are optional on some boats but should be as standard as power trim and tilt. Lenco compensators make your boating smoother, drier, faster and with increased safety, whether on a small skiff or a mega-yacht. Lenco's ball screw design is more reliable, three times more powerful and features instant response, making them very user-friendly compared to conventional hydraulic systems. We also like to be oil-free and environmentally conscious. All the same features of the Edge Mount series with the addition of electro-polished blades. Electro-Polish adds a mirror finish and ultimate corrosion protection. The actuatorfitted on the back edge of these 12" blades, giving them a 3" lower mounting height. Blades are made of laser cut 12 gauge electro-polished 304 stainless steel with 1" raised edges and a 5 degree taper. on both sides to the trailing edge and 1/8" hinge pin diameter. Corrosion-resistant top and bottom mounting brackets with mechanical gasket.

Lenco 15116101 Attributes

Tab Size: 12" L x 12" W
Material: Stainless Steel

Lenco 15116101 Features and Benefits

Fast Response Electric Actuators
Fully Submersible Actuators
li>
Plug and Play Waterproof Connectors
Switch Kit Sold Separately
3 Year Limited Warranty

Lenco 15116101 Installation Instructions

Trim_Tab_Manual_TCHDAT.pdf

Lenco Technical Bulletins 15116101

size_diagram_edge_mount_TCHDAT.pdf
standard_performance_diagram_TCHDAT.pdf

12" 12" Electro-Polished Edge Mount Decorative Tab Kit
12 volts

Fast responding electric actuators for precise control Fully submersible All Plug & Play connections Deutsch. Electro-polished are constructed of 12 gauge 304 stainless steel with 1" raised edges and 85x inner taper and 1/8" diameter stainless steel hinge pin. Actuators mount on the trailing edge of the blades. , requiring 1/2" less transom height than standard mounting tabs.

Kits include:

(2) Blades electro-polished 12 gauge stainless steel
(2) Actuator 15054-001 with 6' wires and Deutsch connectors
(2) 30133 -103 20' Actuator Extension Wire Harnesses
(2) 15085-001 Top Mount Bracketss with gasket
(2) 50014-001 lower mounting brackets
br>
Installation Manual/ from owner Lenco
Stainless steel mounting hardware

Specifications:

Boat length:17' - 30'
L" x W":12" x 12"
Hinge Height:2"
Minimum Transom Height:11"

This product can expose you to chemicals including di(2-ethylhexyl)phtha.tardif (dehp) which is recognized by the State of California as causing cancer, birth defects, or other reproductive harm. For more information,

These qualified Lenco product experts are designed to provide you...
PRODUCT ID: 56448
SKU: NVN- 56448
CSKU: CWR-56448
REWRITE: 67559-lenco-12-x-12-electro-polished-edge-mount
MPN: 15116-101
UPC: 874847006804
ASIN: B00AJVKUVE
WSKU: LEN15116101
SSKU:
KSKU: LEN15116101
GSKU:
MSKU:
LSKU: 622-15116101
NAME: Lenco 12" x 12" Electro Polished Edge Mount Trim Tab Kit
NAME_EX: LENCO 12" X 12 Electropolished Edge Mount Trim Tab KIT "
PTITLE: Lenco 12" x 12" Electropolished Edge Mount Trim Tab Kit
TYPE: Boat Equipment | Trim Tabs
SELLER: Lenco Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES

Lenco Marine Inc 15116-101 12" X 12 "Edge mounting kit
Lenco 15116-101 Tab Kit-12x12 Edge Elect-Polsh Lenco Trim Tabs & Accessories

Gtags:

Lenco

GSpecs:

Lenco 12" x 12" Electro-Polished Edge Mount Trim Tab Kit Product Description

Electro-Polished Edge Mount Trim Tab Kit 12 gauge blades/12 volt actuators Trim tabs make the difference most important in how your boat moves and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco compensators make your boating smoother, drier, faster and with increased safety, whether on a small skiff or a mega-yacht. Lenco's ball screw design is more reliable, three times more powerful and features instant response, making them very user-friendly compared to conventional hydraulic systems. We also like to be oil-free and environmentally conscious. All the same features of the Edge Mount series with the addition of electro-polished blades. Electro-Polish adds a mirror finish and ultimate corrosion protection. The actuator mounts to the trailing edge of these 12" blades, giving them a 3" lower mounting height. Blades are made of Electro-Polihangar 12 gauge laser cut 304 stainless steel with 1" raised edges and a 5 degree taper on both sides to the trailing edge and a 1/8" hinge pin in diameter. Corrosion-resistant upper and lower mounting brackets with mechanical gland seal.

Attributes Lenco 15116101

Tab Size: 12 inches Length x 12 inches Width
Material: Stainless Steel

Lenco 15116101 Features and Benefits

Fast Response Electric Actuators
Fully Submersible Actuators
Plug and Play Waterproof Connectors
Switch Kit sold separately
Limited to 3 years warranty

Lenco 15116101 Installation Instructions

Trim_Tab_Manual_TCHDAT.pdf

Lenco 15116101 Technical Bulletins

size_diagram_edge_mount_TCHDAT.pdf
standard_performance_diagram_TCHDAT.pdf

12" x 12" Electropolished Edge Mount Trim Tab Kit
12 V

Fast-response electric actuators for precise control. Fully submersible. All connections Plug & Play Deutsch. Electropolished blades are made from 12 gauge 304 stainless steel with 1" raised edges, 85x interior taper and 1/8" diameter stainless steel hinge pin. Actuators mount to the trailing edge of the blades, requiring 1/2" less transom height than standard mounting tabs.

Kits include:

(2) Electro-polished 12 gauge stainless steel blades
(2) Actuator 15054-001 avec 6' wires and Deutsch connectors
(2) 30133 -103 20' actuator extension wire harnesses
(2) 15085 -001 upper mounting brackets with gasket
(2) 50014-001 lower mounting brackets
br>
Lenco Installation/Owner's Manual
Stainless Steel Mounting Hardware

Specifications:

Boat length:17' - 30'
L" x W":12" x 12"
Hinge height:2"
Minimum transom height:11"

This product can expose you to chemicals, including di(2-ethylhexyl phthalate (dehp), known by the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to P65Warnings.ca.gov.

These are experts in. qualified productsfrom Lenco are designed to provide you...

Lenco 12" x 12" Electro-Polished Edge Mount Decorative Tab Kit Related ProductsLenco Top Mount Bracket with Gland Gasket (2008 - Present)
Lenco Compact Top Mount Bracket - 2 screws 1 thread
Lenco Standard Top Mount Bracket - 3 screws 1 thread
Lenco Standard Bottom Mount Bracket - 3 bolts
Rudder Tecnoseal R1 Anode - Zinc - 1-7/8" diameter
Tecnoseal R2 Rudder Anode - Zinc - 2-13/16" diameter
Tecnoseal R3 Rudder Anode - Zinc - 3-3/ 4" diameter
Tecnoseal R1AL Rudder Anode - Aluminum - 1-7/8" diameter
Tecnoseal R2AL Rudder Anode - Aluminum - 2-13/16" diameter
Rudder Anode Tecnoseal R3AL - Aluminum - 3-3/4" Diameter Frequently Asked Questions (FAQ) About Lenco 12" x 12 Electro-Polished Edge Mount Decorative Tab Kit "Who is Lenco Marine?
How to describeire the Lenco 12" x 12" Electro-Polished Edge Mount Decorative Tab Kit?
What is the operating voltage of the product?
What is the material of the Electro-Polished Edge Trim Kit? Lenco 12" x 12"?
What is the weight of the product?
What is the size?
br/> What is the construction of the product?
What is the finish of the product?
Who is Lenco Marine? Trim tabs make the most important difference in how your boat will sail and operate. Lenco compensators will make your boating experience smoother, drier, faster and with increased safety, whether on a high-performance family cruiser or a small skiff. Lenco's ball screw design is more reliable, twice as powerful and features a consistent response, making them very user-friendly. How to describe the Lenco 12" x 12" Electro-Polished Edge Mount Trim Tab Kit? These production expertsLenco's qualified uits are designed to provide you...

Get a polished look and feel with the electropolished stainless steel blades.
All connections are plug and play, so that you can start using it right out of the box.
Fast-response electric actuators provide precise control for a perfect shave.

The perfect compensator kit for boats that need to be able to withstand the harshest conditions.
With a mounting area of 12" x 12", it is perfect for a wide range of vessels.
Electro-polished blade is made from high quality 304 stainless steel and designed with a sleek, modern look.

Lenco 12" x Edge Mount Trim Tab Kit 12" 12V Electro-Polished Model: 15116-101

What is the operating voltage of the product? 12

Get a polished look and feel with electro-polished stainless steelmade of steel.
All connections are plug and play, so you can start using it right out of the box.
Quick-response electric actuators provide precise control for a perfect shave.
The perfect fin kit for boats that need to be able to withstand the harshest conditions.
With a mounting area of 12" x 12" , it is perfect for a wide range of vessels.
The electro-polished blade is made of high quality 304 stainless steel and designed with a sleek, modern look.
The compensator ultimate for the boat.
The Edge Mount series is now available in electro-polished blades, giving you the best of both worlds.
Get corrosion protection and a mirror finish with this latest addition to the Lenco range.
Complete Edge Mount trim tab kit for 12V electric models.
Includes all the same functionsfeatures of the Edge Mount series with the addition of electro-polished blades.
Electro-polishing adds a mirror finish and ultimate corrosion protection.

What is the material of the Lenco 12" x 12" Electropolished Edge Trim Tab Kit? Stainless steelWhat is the weight of the product? 19What is the size? 12"L x 12"WWhat is the construction of the product? Stainless steelWhat is the finish of the product? Electro Polished

Save $448 when you purchase the Lenco 12" x 12" Electro Polished Edge Trim Tab Kit for only $596 from NVN Marine! Same day dispatch before 3 p.m. Lenco 12" x 12" Electro-Polished Edge Mount Trim Tab Kit Technical Specifications

Type:	Boat Equipment \| Compensating Tabs
Seller:	Lenco Marine
Weight:	19.6 lbs
Construction:	Stainless Steel

Tab Kit Lenco 12" x 12" Electro-Polished Edge Trim Tab User ReviewsLenco 12" x 12" Electro-Polished Edge Trim Tab Shipping & Return Kit

Shipping Weight :	19.6 lbs
Box Sizes:	6.00 ( h) x 13.00 (l) x 14.00 (l)
Cubic feet:	1092.0
Returnable:	Yes
P65:	Yes

For detailed shipping terms, please see our Shipping Policy page and you can find our return and refund policy here.