Lenco 12" x 9" Edge Mount Kit with 12V Standard Touch Switch Boat Outfitting

Onboard mounting

Mounts the actuator to the trailing edge of the aircraft, requiring 4" of height less transom than standard fitment

Compensators make the most important difference in how your boat rides and performs. They are optional on some boats but should be as standard as electric trim tabs and tilt make your ride smoother, drier. faster and with increased safety, whether on a small skiff or a mega-yacht, Lenco's ball screw design is more reliable, three times more powerful and features instant response, making them very user-friendly by compared to conventional hydraulic systems. free and environmentally friendly.

Instant response electric actuators for precise control
Everything is fully submersible, maintenance free and sealed for life
The screwSelf-locking balls will not drift, even when moving backwards
Laser cut 12 gauge stainless steel drift planes
Corrosion and impact resistant brackets look great despite years of abuse
Clean installation, saving time and space
Actuators are high impact, Ultraviolet resistant nylon housing, 50% fiberglass filled
316 super polished stainless steel cylinders

Switch kits Standard Solid State Touch Panels with Spreader Feature
#15069-001 (124SSR)
For 12 volt single actuator systems. The control box is waterproof, self-contained, sealed, solid state, connected to Deutsch for easy Plug & Play installation and has a built-in winder. Kit includes 36" power pigtail and nylon nuts for mounting keyboard. Colorful display box.

Features

Built-in winding function
Solid state electronics
Plug & Play
Low profile design
Sealed, self-contained keypad and solid-state control box with waterproof connectors
Quick and simple installation
Includes 36" feed pigtail for feed control
2" hole cutout size , overall size 2.75" x 2.75'

Each kit contains:

Standard Tactile Switch Kit
2 actuators with 6' cable and Deutsch plugs
2 20' actuator extension cable harnesses
2 12 gauge stainless steel fin planes
2 upper mounting brackets with gland gasket
2 lower mounting brackets
/li>
All stainless steel mounting hardware

This product can expose you to chemicals including di(2-ethylhexyl) phthalate ( dehp), known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,

Onboard installation installs the actuator on the rear edge of the aircraft, and the required step height is 4 less than that of the standard support.
PRODUCT ID: 29305
SKU: NVN-29305
CSKU: CWR-29305
REWRITE: 40416-lenco-12-x-9-edgemount-kit-w-standard
MPN: TT12X9E
UPC: 818254119139
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Lenco 12" x 9" Edgemount Kit with standard 12V touch switch kit
NAME_EX: LENCO 12"Lenco 12" x 9" edge mount with 12V standard touch switch kit
TYPE: Boat Equipment | Trim Tabs
SELLER: Lenco Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES Lenco Marine TT12X9E Edge 12V Electrical Trim Mount Kit with Touch Switch, Pair

Gtags:

Lenco

Specifications G:

Lenco 12" x 9" Edge Mount Kit with 12V Standard Touch Switch Kit Product Description Edge Mount

Mounts the actuator to the trailing edge of the aircraft, requiring 4" less transom height than the standard mount

The trim tabs make the most significant difference in how your boat runs and operates. They are optional on some boats but should be standard like electric trim and tilt, Lenco trim tabs make your boat smoother, drier, faster and with added safety whether on a small skiff or a mega -yacht. Lenco's ball screw design is more reliable, three times more powerful and delivers instant response. which makes them very user-friendly compared to conventional hydraulic systems. We also like to be oil-free and environmentally friendly.

Electric Actuatorsinstant response for precise control
Everything is perfect. fully submersible, maintenance free and sealed for life
Self-locking ball screw will not drift, even when moving backwards
Cut-to-face stainless steel trim tab plans 12 gauge laser
High impact corrosion resistant brackets look great despite years of abuse
Clean, quick, space-saving installation
br>
Actuators feature a 50% glass fiber filled, impact resistant, ultraviolet resistant nylon housing
316 stainless steel cylinders super polished

Standard Solid State Tactile Switch Kits with Gap Function
#15069-001 (124SSR)
For Systems 12 volt single actuator. The control box is waterproof, self-contained, sealed, solid state, connected to Deutsch for easy Plug & Play installation and has aintegrated color. Kit includes 36" power pigtail and nylon nuts for mounting keyboard. Colorful display box.

Features

Integrated winding function
Solid state electronics
Plug & Play
Low profile design
Sealed, self-contained keypad and solid state control box with waterprode connectors
Quick and simple installation
Includes a 36" power pigtail for the control box
2" hole cutout size, overall size 2.75" x 2.75'

Each kit contains:

Standard touch switch kit
2 actuators with 6' cable and plugs Deutsch
2 20' actuator extension wire harnesses
2 12 gauge stainless steel fin planes
2 upper mounting brackets with gasket
2 bottom mounting brackets
All stainless steel mounting hardware

This This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), which is known to the State of California to cause cancer and birth defects or other reproductive harm. . For more information,

On-edge installation installs the actuator on the rear edge of the aircraft and the required step height is 4 less than that of the standard support. />
Lenco 12"Edge x 9" Mount Kit with 12V Standard Tactile Switch KitRelated ProductsLenco Top Mount Bracket with Gland Gasket (2008-Present)
Compact Top Mount Bracket Lenco - 2 screws 1 thread
Lenco standard upper mounting bracket - 3 screws 1 thread
Lenco standard lower mounting bracket - 3 bolts
AnTecnoseal R1 Rudder Anode - Zinc - 1-7/8" Diameter
Tecnoseal R2 Rudder Anode - Zinc - 2-13/16" Diameter
Tecnoseal R3 Rudder Anode - Zinc - 3-3 /4" diameter
Tecnoseal R1AL rudder anode - Aluminum - 1-7/8" diameter
Tecnoseal R2AL rudder anode - Aluminum - 2 -13/16" diameter
Anode Tecnoseal R3AL Rudder Kit - Aluminum - 3-3/4" Diameter Frequently Asked Questions (FAQ) about Lenco 12" x 9" Edgemount Kit with Tactile Switch Kit standard 12 V Who is Lenco Marine?
How to describe the Lenco 12" x 9" onboard mounting kit with touch switch kit standard 12 V?
Who is the brand of trim tabs from Lenco Marine ? sinDiscover the most important difference in how your boat will sail and operate. Lenco compensators will make your boat navigation smoother, drier, faster and with increased safety, whether on a crefficient family oiser or a small skiff. Lenco's ball screw design is more reliable, twice as powerful and offers instant response which makes them very user-friendly. How to describe the Lenco 12" x 9" mounting kit with 12V standard touch switch kit? Edge installation installs the actuator on the rear edge of the aircraft and the required rung height is 4 times lower than the standard mount.

Save $483 when you purchase the Lenco 12" x 9" Edge Mount Kit with 12V Standard Tactile Switch Kit for only $723 from NVN Marine! Same day dispatch before 3 p.m. Lenco 12" x 9" Edge Mount Kit with 12V Standard Tactile Switch Kit Videos Lenco 12" x 9" Edge Mounting Kit with 12V Standard Tactile Switch Kit Technical Specifications

Type:	Boat Equipment \| Compensating tabs
Fristrength:	Lenco Marine
Weight:	17.4 lbs
Product brochure:	Download PDF

Lenco 12" x 9" Edge Mount Kit with 12V Standard Tactile Switch Kit User ReviewsLenco 12" x 9" Edge Mount Kit with 12V Standard Tactile Switch Kit Shipping & Returns

Shipping Weight:	17.4 lbs
Box Sizes:	3.00 (h) x 5.00 (w) x 9.00 (w)
Cubic feet:	135.0
Returnable:	Yes
P65:	Yes

For conditions detailed shipping policies, please see our shipping policy and you will find our return and refund policy here.