Lenco 9" x 12" Edge Mount Trim Tab Kit without Switch Boat Outfitting
Edge Mount Trim Tab Kit12 Gauge Blades / 12 Volt ActuatorsTrimming tabs make the most important difference in how your boat rides and operates. They are optional on some boats but should be as standard as power trim and tilt. Lenco compensators make your boating smoother, drier, faster and with increased safety, whether on a small skiff or a mega-yacht. Lenco's ball screw design is more reliable, three times more powerful and features instant response, making them very user-friendly compared to conventional hydraulic systems. We also like to be oil-free and eco-friendly. Lenco electric trim kits make your boat smoother, drier, faster and with increased safety, whether on a small skiff or a large yacht. The design of ball screwses Lenco are more reliable, three times more powerful and feature instant response, making them very user-friendly compared to conventional hydraulic systems. Lenco fast response electric actuators are fully submersible with all waterproof Deutsch plug & play connections. Edge Mount actuators mount to the trailing edge of the aircraft, requiring 4" (10.16 cm) less transom height than standard Lenco mount trim tabs. Lenco quick response electric actuators are fully submersibles with all Deutsch waterproof plug & play connections Mounting on Edge Mount actuators at the trailing edge of the aircraft, requiring 4" (10.16 cm) less transom height than standard Lenco mount trim tabs. .
Attributes Lenco 15014101- Tab Size: 9" Length x 12" Width
- Material: Stainless Steel
- 12 Gauge - Stainless Steel Blades
- Fast Response Electric Actuators
- Fully Submersible Actuators
- Plug and Play Waterproof Connectors
- Switch kit sold separately
- 3 year limited warranty
- Trim_Tab_Manual_TCHDAT.pdf
- size_diagram_edge_mount_TCHDAT.pdf
- standard_performance_diagram_TCHDAT.pdf
Mount Trim Tab Kit onboard 9" x 12" without switch kit -12V
Lenco electric onboard trim kits make your boating smoother, drier, faster and with increased safety, whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features instant response, making them very user friendly compared toto conventional hydraulic systems. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount to the trailing edge of the aircraft, requiring 4" (10.16 cm) less transom height than standard Lenco mount trim tabs.
Kit Contents:
- 2 12 gauge stainless steel trim tab blades
- 2 each of actuator #15054-001 with 6 cables ' and Deutsch plugs
- 2 each of #30133-103 20' Actuator Extension Wire Harnesses
- 2 Top Mounting Brackets #15085-001 (116) with gasket
- 2 lower mounting brackets #50014-001 (119)
- 1 lower mounting brackets Lenco owner / installation manual
- All necessary stainless steel mounting hardware
Specifications:
- Suggested boat length: 16' to 25'
- Tab length: 9"
- Tab width: 12"
- Hinge Height: 2"
- Min Transom Height: 13.5"
- Blades: 12 Gauge Stainless Steel
- Finish: Smooth
- Switch kit: sold separately
- Class: Fuel efficient
- Compliance: CE certified
- Compatibility: any boat
- Actuators: 12 volts
WARNING: This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp ), known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,
Edge Trim Strip Kit, No Switch lenco electricTrim Strip Kit Makes Your Boat Smoother, Dryer, Faster and increases security, whetheron a small boat or on a small boat.
PRODUCT ID: 56424
SKU: NVN-56424
CSKU: CWR-56424
REWRITE: 67535-lenco-9-x-12-edge- mount-trim
MPN: 15014-101
UPC: 874847004367
ASIN: B002IV5022
WSKU: LEN15014101
br>SSKU: LEN-15014-101
KSKU: LEN15014101
GSKU:
MSKU:
LSKU: 622-15014101
NAME: Lenco 9" x 12" Edge Mount Trim Tab Kit with /o Switch
NAME_EX: LENCO 9"X12" EDGEMOUNT NO SWITCH KIT
PTITLE: Lenco 9" x 12" Edge Mount Trim Tab No Switch Kit
TYPE: Boat Equipment | Trim Tabs
SELLER: Lenco Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
KIT Trim TAB KIT Edge Mount 9 x 12
Lenco Trim Kits - Edge Mount - 9X12 - 15014-101
Gtags:
| Lenco |
GSpecs:
Lenco 9" x 12" Edge Mount Trim Tab Kit Without Switch Product Description
Edge Mount Trim Tab Kit 12 Gauge Blades / 12 Volt Actuators Trim Tabs Make the Most Important Difference in the way your boat rides and operates. They are optional on some boats but should be as standard as power trim and tilt. Lenco compensators make your boating smoother, drier, faster and with increased safety, whether on a small skiff or a mega-yacht. Lenco's ball screw design is more reliable, three times more powerful and features instant response, making them very user-friendly compared to conventional hydraulic systems. We also like to be oil-free and eco-friendly. Lenco electric trim kits make your boat run smoother, drier, faster and easier.ec increased safety, whether on a small skiff or a large yacht. Lenco ball screw design is more reliable, three times more powerful and features instant response, making them very user friendly compared to conventional hydraulic systems. Lenco quick response electric actuators are fully submersible with all waterproof Deutsch connections plug & play. Edge Mount actuators mount to the trailing edge of the aircraft, requiring 4" (10.16 cm) less transom height than standard Lenco mount trim tabs. Lenco quick response electric actuators are fully submersibles with all Deutsch waterproof plug & play connections Mounting on Edge Mount actuators at the trailing edge of the aircraft, requiring 4" (10.16 cm) less transom height than standard Lenco mount trim tabs. .
Attributes Lenco 15014101- Nail sizeand: 9 inches long>
- 12 Gauge - Stainless Steel Blades
- Fast Response Electric Actuators
- Fully Submersible Actuators
- Plug and Play waterproof connectors
- Switch kit sold separately
- 3 year limited warranty
- Trim_Tab_Manual_TCHDAT.pdf
- size_diagram_edge_mount_TCHDAT.pdf
- standard_performance_diagram_TCHDAT.pdf
9" x 12" Edge Mount Trim Tab Kit without Switch Kit - 12V
Lenco Electric Edge Mount Trim Tab Kits make it easy your boat ride smoother, drier, faster and with increased safety whatever it may ber a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features instant response, making them very user-friendly compared to conventional hydraulic systems. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount to the trailing edge of the aircraft, requiring 4" (10.16 cm) less transom height than standard Lenco mount trim tabs.
Kit Contents:
- 2 12 gauge stainless steel trims from each tab blades
- 2 from each of actuator #15054-001 with cables 6' and Deutsch Plugs
- 2 each of 20' Actuator Extension Wire Harness #30133-103
- 2 Top Mounting Brackets #15085-001 (116) with gasket
- 2 lower mounting brackets #50014-001(119)
- 1 Lenco Owner's Lower Mounting Brackets / Installation Manual
- All necessary stainless steel mounting hardware
Specifications:
- Suggested boat length: 16' to 25'
- Tab length: 9"
- Tab Width: 12"
- Hinge Height: 2"
- Minimum Transom Height: 13.5"
- Blades: 100% Stainless Steel 12 gauge
- Finish: Smooth
- Switch kit: sold separately
- Class: Fuel efficient
- Compliance: CE certified
- Compatibility: Any boat
- Actuators: 12 volts
WARNING: This product can expose you to chemicals , including di(2-ethylhexyl) phthalate (dehp), known to the State of California to cause cancer, birth defects or other reproductive harm. For more information,
Edge Trim Strip Kit, No Switch Lenco Electric Trim Strip Kit makes your boating smooth, dry, faster and increases safety, whether on a small boat or on a small boat.
Lenco 9" x 12" Edge Mount Trim Tab Kit without Switch Related ProductsLenco Top Mount Bracket with Gland Gasket (2008-Present)
Top Mount Bracket compact Lenco - 2 screws 1 Thread
Lenco standard upper mounting bracket - 3 screws 1 thread
Lenco standard lower mounting bracket - 3 bolts
Tecnoseal R1 rudder anode - Zinc - 1-7 /8" diameter
Tecnoseal R2 rudder anode - Zinc - 2-13/16" diameter
Tecnoseal R3 rudder anode - Zinc - 3-3/4" diameter
Anode Tecnoseal R1AL rudder anode - Aluminum - 1-7/8" diameter
Tecnoseal R2AL rudder anode - Aluminum - 2-13/16" diameter
Anode dTecnoseal R3AL Rudder - Aluminum - 3-3/4" Diameter Frequently Asked Questions (FAQ) for Lenco 9" x 12" Edge Mount Trim Tab Kit without switch Who is the Lenco Marine?
How to describe the Lenco 9" x 12" Edge Mount Trim Tab Kit with /o Switch?
What is the operating voltage of the product?
What is the material of the Lenco 9" x 12" edge trim kit without switch?
What is the weight of the product?
What is the size?
What is the construction of the product?
How is the product finished?
Who is Lenco Marine? Trim tabs make the most important difference in how your boat will sail and operate. Lenco trim tabs will make your boat ride smoother. smoother, drier, faster and with increased safety, whether on a performance family cruiser or a small skiff The ball screw design.from Lenco are more reliable, twice as powerful and offer instant response which makes them very user-friendly. How to describe the Lenco 9" x 12" Edge Mount Trim Tab Kit without Switch? Trim Strip Kit, WithoutThe Lenco Electric Trim Strip Kit makes your boat smoother, drier, faster and increases safety, whether on a small boat or a small boat.
- The screw Lenco ball bearing provides a smoother, quieter ride. and longer life.
- Mounting brackets allow installation on any thickness of boat hull.
- Installation is as easy as 1, 2 , 3.
- Product Features: - 8 GB storage space for music and photos
- can play videos in HD quality
- Description features: - Stream your favorite songs from the cloud or download them to your device.
- Show alle your photos and videos in high definition.
- The Lenco ball screw offers increased safety, smoother driving and better performance.
- The Edge Mount decorative tab kit is easy to install without drilling.
- Comes with stainless steel screws and gaskets for a durable product.
If you are looking for A trim tab kit that is easy to install, durable and features a lower support height for smoother operation, so look no further! Lenco's Decorative Edge Mount Tab Kit is the perfect solution.
What is the operating voltage of the product? 12- The Lenco ball screw provides a smoother, quieter ride and longer life.
- Mounting brackets allow installation on any hull thickness boat.
- Installation is as easy as 1, 2, 3.
- FeaturesProduct Features: - 8GB storage space for music and photos
- Can play videos in HD quality
- Feature Description: - Stream your favorite songs from the cloud or download them to your device.
- View all your photos and videos in high definition.
- The Lenco ball screw provides increased safety, smoother driving, and better performance.
- The edge mount decorative tab kit is easy to install without drilling.
- Comes with stainless steel screws and gaskets for a durable product. >
- A compact, low profile slack mounting system ideal for boats with limited space.
- Mounts the actuator to the trailing edge of the blade, providing actuator mounting height 13.5" (34.29 cm)
- The trim tab kit includes all necessary hardware and an installation guide
- The actuator mounts to the edge of leak ofthe blade, giving it a mounting height of 13.5" (34.29 cm)
- The trim tab is designed for boat applications where a lower actuator mounting height is desirable
- Requires Switch Model: 15014-101
| Type: | Boat outfitter | Compensating Tabs |
|---|---|
| Seller: | Lenco Marine |
| Weight: | 17.3 lbs |
| Construction: | Stainless steel |
| Shipping Weight: | 17.3 lbs |
|---|---|
| Box sizes: | 5.00 (h) x 13.00 (w) x 14.00 (w) |
| Cubic feet: | 910.0 |
| Returnable: | Yes |
| P65: | Yes |
For detailed shipping policy, please check our shipping policy and you can find our return and refund policyent here.
- Lenco 9" x 12" Edge Mount Trim Tab Kit with LED Indicator Switch Kit
- Lenco 9" x 12" Edge Mount Kit with Standard Tactile Switch Kit
- Lenco 7 degree mounting wedge for f/118 and 119 mounting brackets
- Lenco 5/16 hardware kit for standard 101 actuator
- Lenco 4x30 12V Hybrid Trim Kit
- Lenco 4x24 12V Hybrid Trim Kit
- Lenco 4x18 12V Hybrid Trim Kit
