Lenco 9" x 9" Standard Performance Trim Tab Kit without Switch Kit 12V Boat Outfitting

9" x 9" Standard Performance Trim Tab Kit without Switch Kit - 12V

Upgraded Electropolished Trim Blades with Diameter sturdier 1/4" hinge pin makes these performance trim kits a cut above the basic level. Lenco standard trim kits feature the same fast-response electric actuators for precise control with all Deutsch 12 gauge SS plug & play connections with 1" raised edges (the 16" x 12" and 18" x 14" have an 85 degree inside taper) and a 1" hinge pin. /4" diameter. Kit includes standard actuators with 5/16" SS bolts. Actuators mount to the trailing edge of the blades

Kit Contents:

2 each of 12 gauge stainless steel trim tabs electro-polished blades
2 each of actuator no. 15054-001 with 6' cable and Deutsch plugs
2 each of 20' Actuator Extension Wire Harness #30133-103
2 Top Mounting Brackets #15085-001 (#116) with gasket sealing
2 lower mounting brackets #50014-001 (#119)
1 each from Lenco User and Installation Manuals
All necessary stainless steel mounting hardware

Specifications:

Suggested boat length: 13' to 20'
Tab Length: 9"
Tab Width: 9"
Minimum Transom Height: 13.5"
Blades: 12 Gauge Stainless Steel
Finish:
Electro-Polished Switch Kit: Sold Separately
Rating: Fuel Efficient
Compliance: CE certified
Compatibility: any boat
li>
Actuators: 12 volts

This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information. go to P65Warnings.ca.gov.

Standard actuator with stainless steel through-hole 5/16 old bolts. One side is curved upwards and there are 2 cones inside. Running in rough seas is not for the faint of heart. Aggressive boating requires durable boating accessories. Lenco's Standard Performance decorative strip series is designed to handle whatever you or nature could throw at them. All objects on your ship are carefully designed to move quickly. Why is your decorative label system different? Structure entirely in stainless steel (no different metals), electropolished blades,durable and beautiful, the speed of the actuator is precise and controllable, so you will not be surprised by the highest speed. Actuator. Instant Response can be completely submerged in water, maintenance free and sealed for life. High strength super biotin nylon shell, filled with 50% glass fibers. Each kit contains:. 2 actuators with 6' wires and Deutsch plugs 2 12 SS electro-polished decorative panel 2 20' actuator extension wiring harness 2 upper mounting bracket with gasket 2 lower mounting bracketThere are no Not all necessary mounting hardware is stainless steel.
PRODUCT ID: 29238
SKU: NVN-29238
CSKU: CWR-29238
REWRITE: 40349-lenco-9-x-9-standard-performance-trim
MPN: 15034- 101
UPC: 874847004565
ASIN: B00KOEN4VY
WSKU: LEN15034101
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Lenco Stan Performance Trim Tab Kit9" x 9" stinger without 12V switch kit
NAME_EX: LENCO 9" " without 12V switch kit
TYPE: Boat fittings | Trim Tabs
SELLER: Lenco Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES

LENCO MARINE Lenco 9" x 9" Standard Performance Trim Kit without Switch Kit 12V
LencoStandard Performance Trim Kit 9 x 9 without Switch Kit 12V

Gtags:

Lenco

GSpecs:

Lenco 9" x 9" Standard Performance Trim Tab Kit without Switch Kit 12V Product Description

9" x 9" Standard Performance Trim Tab Kit without Switch Kit - 12V

Upgraded electropolished trim blades with a stronger 1/4" diameter hinge pin make these performance trim tab kits a step above the basic level Lenco standard mounting kits. Equipped with the same fast-response electric actuators for precise control. Fully submersible with all Deutsch Plug & Play connections. Blades are 12 gauge – 304 SS electro-polished with 1" raised edges. (the 16" x 12" and 18" x 14" have an 85 degree interior taper) and 1/. 4" diameter hinge pin. Kit includes standard actuators with 5/16" stainless steel bolts. The actuators mount on the trailing edge of the blades

Contents of kit:

2 each of electro-polished 12 gauge stainless steel trim tabs
2 each of actuator #15054-001 with cable 6' and Deutsch plugs
2 from each of actuators #30133-103, 20' extension ension wire harnesses
2 from each of top mounting brackets #15085- 001 (#116) with gasket
2 each of lower mounting brackets #50014-001 (#119)
1 Lenco installation/owner's manual
All stainless steel mounting hardware needed

Specifications:

Suggested boat length: 13' to 20'
Tab Length: 9"
Tab Width: 9"
Minimum Transom Height: 13.5"
Blades: 12 gauge stainless steel
Finish: electropolished
Switch kit: sold separately
Rating: Fuel efficient
Compliance: Certifié CE
Compatibility: Any boat
Actuators: 12 volts

This product may expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, see P65Warnings. .ca.gov.

Standard actuator with 5/16 stainless steel through-bolts. One side is curved upwards and there are 2 cones inside. Running in rough seas is not for the faint of heart. Aggressive boating requires durable boating accessories. Lenco's Standard Performance decorative strip series is designed to handle whatever you or nature could throw at them. All objects on your ship are carefully designed to move quickly. Why your label systemdecorative is different? Full stainless steel structure (no different metals), electropolished blades, durable and beautiful, the speed of the actuator is precise and controllable, so you will not be surprised by the highest speed. Actuator. Instant Response can be completely submerged in water, maintenance free and sealed for life. High strength super biotin nylon shell, filled with 50% glass fibers. Each kit contains:. 2 actuators with 6' wires and Deutsch plugs 2 12 SS electro-polished decorative panel 2 20' actuator extension wiring harness 2 top mounting bracket with gland gasket 2 bottom mounting bracket all hardware stainless steel assembly required.

Lenco 9" x 9" Standard Performance Trim Kit without 12V Switch Kit Related ProductsLenco Top Mount Bracket with Gland Gasket (2008-Present)
Bracket disassemblyLenco compact upper - 2 screws 1 thread
Lenco standard upper mounting bracket - 3 screws 1 thread
Lenco standard lower mounting bracket - 3 bolts
Tecnoseal R1 rudder anode - Zinc - 1- 7/8" diameter
Tecnoseal R2 rudder anode - Zinc - 2-13/16" diameter
Tecnoseal R3 rudder anode - Zinc - 3-3/4" diameter
Tecnoseal R1AL Rudder Anode - Aluminum - 1-7/8" Diameter
Tecnoseal R2AL Rudder Anode - Aluminum - 2-13/16" Diameter
Tecnoseal R3AL Rudder Anode - Aluminum - 3-3 /4" diameter

Frequently Asked Questions (FAQ) about Lenco 9" x 9" Standard Performance Trim Kit without 12V Switch Kit Who is Lenco Marine?
How to describe the Lenco 9" x 9"; Standard Performance Trim Tab Kit without 12V Switch Kit? What is the warranty policy for Lenco 9" x 9" Standard Performance Trim Tab Kit?without 12 V switch kit?
What is the operating voltage of the product?
What is the type of the product?
What is the style of the product?
What are the dimensions of the product?
What is the compatibility of this product?
Who is Lenco Marine? Trim tabs make the most important difference in how your boat will sail and operate. Lenco compensators will make your boating experience smoother, drier, faster and with increased safety, whether on a high-performance family cruiser or a small skiff. Lenco's ball screw design is more reliable, twice as powerful and offers instant response which makes them very user-friendly. How to describe the Lenco 9" x 9" Standard Performance Trim Tab Kit without 12V Switch Kit? Standard actuator with 5/16 stainless steel through-bolts. One side is curved upwards, and there are 2 cones insideieur. Running in rough seas is not for the faint of heart. Aggressive boating requires durable boating accessories. Lenco's Standard Performance decorative strip series is designed to handle whatever you or nature could throw at them. All objects on your ship are carefully designed to move quickly. Why is your decorative label system different? Full stainless steel structure (no different metals), electropolished blades, durable and beautiful, the speed of the actuator is precise and controllable, so you will not be surprised by the highest speed. Actuator. Instant Response can be completely submerged in water, maintenance free and sealed for life. High strength super biotin nylon shell, filled with 50% glass fibers. Each kit contains:. 2 actuators with 6' wires and Deutsch plugs 2 electro-polished decorative panel 12 SS 2 wiring harness20' actuator extension length 2 top mounting bracket with gasket 2 bottom mounting bracket all necessary stainless steel electrical mounting hardware. What is the warranty policy for Lenco 9" x 9" Standard Performance Trim Tab Kit without 12V Switch Kit? Limited to three years

$412

Lenco 9" x 9" Standard Performance Trim Tab Kit No Kit 12V Switch

$548

Type:	Boat equipment \| Compensating Tabs
Seller:	Lenco Marine
Weight:	18.0 lbs
Product Brochure:	Download the PDF

Shipping Weight:	18.0 lbs
Box sizes:	5.00 (h) x 14.00 (w) x 14.00 (w)
Cubic feet:	980.0
Returnable:	Yes
P65:	Yes

For detailed shipping policy, please see our Politshipping instructions and you can find our return and refund policy here.