Load Rite 8500 lb Disc Brake Actuator - Tie Down Engineering Model Bestsellers

8,500 lb Disc Brake Actuator - Tie-Down Engineering Model

Model 850E operates by the "push" or "push" of the trailer towards the towing vehicle. This automatically synchronizes the trailer brakes with the towing vehicle axle brakes. When the trailer pushes against the tow vehicle, the actuator telescopes and applies force to the master cylinder, providing hydraulic pressure to the brakes. The integrated damping damper delays the telescopic impact against the hitch ball. Be sure to follow the brake regulations in your state. Brake laws are sometimes minimum standards, and users may want to add additional brakes to a trailer.

Read the tow vehicle's owner's manual for towing capacity and other recommendations towing system before installing the brakes or this actuatorr. The Model 850E actuator comes fully assembled and ready to bolt if not fully installed. Made for tongue sizes: 3"x 3", 3"x 4" and 3"x 5".

Functions:

8,500 lbs.
Fits a 2" hitch ball
For use with disc brakes

Maximum hitch capacity actuator:

Gross load: 8,500 lb.
Maximum tongue load: 850 lb.

The actual in-service rating is limited to that of the lowest rated ball and hitch or component of the tow vehicle or trailer used, or the trailer manufacturer's GVWR. indicated on the certification label, whichever is lower (note: GVWR is the gross vehicle weight rating, which includes the trailer and load weight as the total gross weight).

PRODUCT ID: 101882
SKU: NVN-101882
CSKU: CWR-101882
REWRITE: 112993-load-rite-8-500lb-disc-brake-actuator
MPN: 6080.63
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: LOAD RITE ACTUATOR 8.5K
NAME_EX:
br>PTITLE: Load Rite 8,500 lb Disc Brake Actuator – Tie Down Engineering Model
TYPE: Towing | Bearings & Hubs
SELLER: Load Rite
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> VEHICLE STORAGE & CARGO> MOTOR VEHICLE TRAILERS> BOAT TRAILERS

Gtags:

GSpecs:

Load Rite 8,500 lb Disc Brake Actuator – Tie Down Engineering Model Product Description

8,500 lb Disc Brake Actuator – Tie Down Engineering Model

The 850E operates by "surge" or "push" the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the towing vehicle axle brakes. When the trailer pushes against the tow vehicle, the actuator telescopes and applies force to the master cylinder, providing hydraulic pressure to the brakes. The integrated damping damper delays the telescopic impact against the hitch ball. Be sure to follow the brake regulations in your state. Brake laws are sometimes minimum standards, and users may wish to add additional brakes to a trailer.

Read the tow vehicle's owner's manual on the capacity oftowing and other towing recommendations before installing the brakes or this actuator. The Model 850E actuator comes fully assembled and ready to bolt on if not ready to install. Made for tongue sizes: 3"x 3", 3"x 4" and 3"x 5".

Features:

8,500 lbs.
Fits a 2" hitch ball
For use with disc brakes

Maximum hitch capacity actuator:

Gross load: 8,500 lb.
Maximum tongue load: 850 lb.

Save $309 when you purchase the Load Rite 8500 Disc Brake Actuator lb - Tie Down Engineering Modelfor only $490 at NVN Marine! Same day dispatch before 3 p.m. Load Rite 8,500 lb Disc Brake Actuator - Technical Tie Down Engineering Model Specifications

Type:	Towing \| Bearings and Hubs
Supplier:	Load Rite
Weight:	21.0 lbs

Load Rite 8,500 lb Disc Brake Actuator – Tie Down Engineering Model User ReviewsLoad Rite 8,500 lb Disc Brake Actuator – Tie Down Engineering Model Shipping & Returns

Shipping Weight:	21.0 lbs
Box sizes:	(h) x ( l) x (l)
Cubic feet:	0

For a detailed shipping policy, please see our shipping policy and you can find our return and refund policy here.