Magnum ME2012 2000W 12V Inverter with 100A PFC Charger Electrical
The Magnum Energy ME Series Inverter or Charger is a modified sine wave inverter designed specifically for rugged mobile applications. The ME Series is powerful, easy to use, and most importantly, cost effective.
Magnum Energy ME2012U Attributes- Output Voltage: 120V AC
- Input Voltage: 9 -16 V DC
- Continuous output power (W): 2000 watts
- Maximum output power (W): 3700 watts
- Rated current: 100 amps
- Efficiency: 95 percent
- Length (IN): 13-3/4 inches
- Width (IN): 12.65 inches
- Height (IN): 8 inches
- Remote on/off capable: Yes
- With USB port: No
- With voltmeter/ power meter: No
- With short circuit: Yes
- With reverse battery protection: Yes
- With thermal protection: Yes
- With battery cables: No
- With integrated charger: Yes
- With fuse: No
- Safe and reliable
- Power factor corrected, 3-StHigh efficiency, temperature compensated ep charger
- Versatile mounting
- Extended Transfer Relay
- 3 Year Limited Warranty
- Owner's Manual 64-0002 D ME Series .pdf
- ME-series_datasheet_64-0100_RevK_web.pdf
Reliable Mobile Power from Magnum Energy
The Magnum Energy's ME Series Inverter/Charger is a next-generation inverter designed specifically for rugged mobile applications. The ME Series is powerful, easy to use and, above all, cost effective.
Safe and Reliable: The ME Series is ETL listed to the strict requirements of UL/cUL 458 and CSA C22.2 #107.1-. 01, ensuring that the inverter is safe and reliable.
Easy to install: Install the ME series in four stepssimple pes: simply connect the inverter output to your distribution circuits or electrical panel, connect your shore power (AC) cable to the
easy-access terminal block, connect the batteries and turn on the power.
Features
The ME Series Inverter/Charger is loaded with features:
Power Factor Corrected (PFC) Charger : the charger is integrated into all our inverter chargers. It uses less power from a generator than a standard charger - using only 15 amps per 100 amps compared to 23 amps used by standard chargers.
Choice: The ME Series is available in three models of power, allowing you to choose the model that suits you.
Versatile mounting: mount the ME series on a shelf, a partition or even upside down.
Lightweight: the Lightweight aluminum base and cover also provide noise reduction and corrosion resistance.
M PortsMultiple ports: The ME series provides multiple ports, including an RS485 communication port for network expansion and a remote port.
Accessible design: The extra large AC access cover with screw terminal block and terminals 360° DC connection cable with covers makes this inverter more accessible when needed.
Convenient Switches: The ME series comes with an on/off switch mounted on the inverter with an easy LED indicator read.
Extended Transfer Relay: 60A transfer service is available on all models.
Buy with ease: ME Series is backed by a limited warranty three years (36 months).
Accessories and options*
Remote control: For convenient fingertip operation, including the new single button? programming.
AGS Module: Automatically starts and stops your generator based on temperature or battery voltage.
| Inverter specifications | ME2012 | ME2512 | ME3112 |
| Input battery voltage range | 9 - 16 VDC | 9 - 16 VDC | 9 - 16 VDC |
| Rated AC output voltage | 120 VAC | 120 VAC | 120 VAC |
| Output frequency and accuracy | 60hz 0.1Hz | 60hz 0.1Hz | 60hz 0.1Hz |
| 1 ms surge current (AC amps) | 60 | 100 | 120 |
| 100 ms Surge Current (AC Amps) | 37 | 45 | 50 |
| 5-second surge power (actual watts) | 3700 | 5000 | 6000 |
| 30-second surge power (actual watts) | 3450 | 4500 | 4,800 |
| 5 Minute Surge Power (Actual Watts) | 3100 | 3500 | 3950 |
| 30 minute surge power (actual watts) | 2400 | 2900 | 3500 |
| Continuous power at 45°C | 2000 VA | 2500 VA | 3100 VA |
| Maximum continuous input current | 266 ADC | 333 ADC | 413 ADC |
| Inverter efficiency (peak) | 95% | 91% | 90% |
| Transfer time | 16 ms | 16 ms | 16 ms |
| Search mode (typical) | 5 watts | 5 watts | 5 watts |
| No load (120 VAC output) Typical | 20 watts | 23 watts | 25 watts |
| Waveform | Modified sine wave | ||
| Charger specifications | |||
| Continuous 45° output C | 100 ADC | 120 ADC | 160 ADC |
| Charger efficiency | 85% | 85% | 85% |
| Power factor | > .95 | > .95 | > .95 |
| Rated input current at output (AC amps) | 15 | 18 | 21 |
| General Features and Capabilities | |||
| Forwarding Relay Capability | 2 legs at 30 A for 120 V Service /30 A or 240 V/60 A | ||
| Five-stage charging capacity | Bulk, Absorb, Float, Equalize and Battery Saver™ | ||
| Battery temperature compensation | Yes, temperature sensor 15 ft. standard battery rack | ||
| Internal cooling | 0 to 120 cfm variable speed drive using two 92mm brushless DC fans | ||
| Overcorrection protection | Yes, with two superimposed circuits | ||
| Conformal coating on PCBs for protection against corrosion | Yes | ||
| Protection against overheating | Yes, on the transformer, MOSFETS and battery | ||
| Stainless steel fasteners for corrosion protection | Yes | ||
| AC Double Bypass Outlet Circuit Breakers | On ME2012 -20B only - 20 amp AC circuit breakers | ||
| Lists | ETL listed according to UL/cUL 458, CSA C22.2 #107.1-01 | ||
| Warranty | 3 years | ||
| Environmental Specifications | |||
| Operating temperature | -20°C to +60° C (- 4° F to 140° F) | ||
| Non-operating temperature | -40° C to +70° C (-40° F to 158° F) | ||
| Humidity operation | 0 to 95% RH non-condensing | ||
| Physical specifications | |||
| Dimensions (h x w x d) | 13.75" x 12.65" x 8.0" (34.9 cm x 32.1 cm x 20.3 cm) | ||
| Mounting | Shelf (top or bottom up) or partition (vents up) | ||
| Maximum operating altitude | 15,000 feet | ||
| Weight | 37 lb | 41 lb | 46 lb |
Magnum Energy's ME series inverter/chargers are modified sine wave inverters specifically designed for applications robust mobiles. The ME series is powerful and easy to use...
PRODUCT ID: 1001060
SKU: NVN-1001060
CSKU: CWR-1001060
REWRITE: 1012171-magnum-me2012-2000w-inverter-12v -w-100a-pfc
MPN: ME2012-U
UPC: 892608001028
ASIN: B0056GXGEA
WSKU: MGNME2012
SSKU: MAGN-ME2012
KSKU: MGMME2012
GSKU:
MSKU:
LSKU:
NAME: Magnum ME2012 2000W 12v Inverter with 100A PFC Charger
br>NAME_EX:
PTITLE: Magnum ME2012 2000 W 12v inverter with PFC 100A charger
TYPE: Electric | Inverters
SELLER: Magnum
Sports
Magnum Energy - 2000 W 100A Inverter ME2012 Charger
Sports
Gtags:
| Magnum-Dimensions |
GSpecs :
Magnum ME2012 2000W 12V Inverter with 100A PFC Charger Product Description
The Magnum Energy ME Series Inverter or Charger is a modified sine wave inverter designed specifically for rugged mobile applications. The ME series is powerful, easy to use and, above all, cost effective.
Magnum Energy ME2012U Attributes- Output Voltage: 120V AC
- Input voltage: 9-16V DC
- Power continuous output power (W): 2000 watts
- Maximum output power (W): 3700 watts
- Rated current: 100 A
- Efficiency: 95 for hundred
- Length (IN): 13-3/4 inches
- Width (IN) ): 12.65 inches
- Height (IN): 8 inches
- Remote control Ccompatible on/off: Yes
- With USB Port: No
- With voltmeter/wattmeter: No
- With short circuit: Yes
- With reverse battery protection: Yes
- With thermal protection: Yes
- With battery cables: No
- With integrated charger: Yes
- With fuse: No
- Safe and reliable
- High efficiency, 3-stage, temperature compensated, power factor corrected charger
- Versatile mounting
- Transfer relay extended
- 3-year limited warranty
- 64-0002 D ME Series Owner's Manual.pdf
- ME-series_datasheet_64-0100_RevK_web.pdf
Reliable mobile power from Magnum Energy
The MOI Magnum Energy series inverter/charger is a next-generation inverter designed specifically for rugged mobile applications. The ME Series is powerful, easy to use and, above all, cost effective.
Safe and Reliable: The ME Series is ETL listed to the strict requirements of UL/cUL 458 and CSA C22.2 #107.1-. 01, ensuring that the inverter is safe and reliable.
Easy to install: Install the ME series in four simple steps: simply connect the inverter output to your circuits distribution or electrical panel, connect your shore power (AC) cable to the inverter's easy-access terminal block, connect the batteries and turn on the power.
Features
The ME Series Inverter/Charger is packed with features:
Power factor chargerthis answer key (PFC): The charger is integrated into all our inverter chargers. It uses less power from a generator than a standard charger - using only 15 amps per 100 amps compared to 23 amps used by standard chargers.
Choices: The ME Series is available in three power models, allowing you to choose the model that's right for you.
Versatile mounting: Mount the ME Series on a shelf, bulkhead, or even upside down.
p>
Lightweight: The lightweight aluminum base and cover also provide noise reduction and corrosion resistance.
Multiple ports: The ME series provides multiple ports, including an RS485 communication port for network extension and a remote port. port.
Accessible design: Extra large AC access cover with screw terminal block and 360° DC connection terminals with covers make this inverter more accessible when needed.
Practical switchesticks: The ME Series comes with an inverter-mounted on/off switch with an easy-to-read LED indicator.
Extended Transfer Relay: 60A transfer service is available on all models.
Buy with ease: The ME Series is backed by a three-year (36-month) limited warranty.
Accessories and options*
Remote control: For convenient fingertip operation, including the new single button? programming.
AGS Module: Automatically starts and stops your generator based on temperature or battery voltage.
| Inverter specifications | ME2012 | ME2512 | ME3112 |
| Input battery voltage range | 9 - 16 VDC | 9 - 16 VDC | 9 - 16 VDC |
| Rated AC output voltage | 120 VAC | 120 VAC | 120 VAC |
| Output frequency and accuracy | 60 hz 0.1 Hz | 60 hz 0.1 Hz | 60 Hz 0, 1 Hz |
| 1 ms surge current (AC amps) | 60 | 100 | 120 |
| Current surge rating of 100 ms (AC amps) | 37 | 45 | 50 |
| 5-second surge power (actual watts) | 3,700 | 5,000 | 6,000 |
| 30 Second Surge Power (Actual Watts) | 3450 | 4500 | 4800 |
| 5 minute surge power (watts real) | 3,100 | 3,500 | 3950 |
| 30 minute surge power (actual watts) | 2400 | 2900 | 3500 |
| Continuous power at 45°C | 2,000 VA | 2,500 VA | 3,100 VA |
| Maximum continuous input current | 266 ADC | 333 ADC | 413 ADC |
| Inverter efficiency (peak) | 95% | 91% | 90% |
| Transfer time | 16 ms | 16 ms | 16 ms |
| Search mode (typical) | 5 watts | 5 watts | 5 watts |
| No load (120 VAC output) Typical | 20 watts | 23 watts | 25 watts |
| Waveform | If modified Wave | ||
| Charger specifications | |||
| Continuous output at 45°C | 100 ADC | 120 ADC | 160 ADC |
| Charger efficiency | 85% | 85% | 85% |
| Power factor | > .95 | > .95 | > 0.95 |
| Rated Input Current to Output (AC Amps) | 15 | 18 | 21 |
| General features and capabilities | |||
| Transfer relay capacity | 2 legs at 30 A for 120 V/30 A or 240 V/60 A service | ||
| Five-stage charging capacity | Bulk, Absorb, Float, Equalize and Battery Saver™ | ||
| Battery temperature compensation | Yes, standard 15 foot battery temperature sensor | ||
| Internal Cooling | 0 to 120 cfm variable speed drive using two 92mm brushless DC fans | ||
| Overcorrection protection | Yes, with two superimposed circuits | ||
| Compliant coating on PCBs for corrosion protection | Yes | ||
| Overheat protection | Yes , on transformer, MOSFETS and battery | ||
| Stainless steel fasteners for corrosion protection | Yes | ||
| AC Double Branch Outlet Circuit Breakers | On ME2012-20B only - 20 amp AC circuit breakers | ||
| Lists | ETL Listed to UL/cUL 458, CSA C22.2 #107.1-01 | ||
| Warranty | 3 years | ||
| Environmental specifications | |||
| Operating temperature | -20° C to + 60° C (-4° F to 140° F) | ||
| Non-operating temperature | -40° C to +70° C (-40° F to 158° F) | ||
| Humidity operation | 0 to 95% RH non-condensing | ||
| Physical specifications | |||
| Dimensions (h x w x d) | 13.75" x 12.65" x 8.0" (34. 9 cm x 32.1 cm x 20.3 cm) | ||
| Mounting | Shelf (top or bottom up) or partition (ventilation up) | ||
| Maximum operating altitude | 15,000 feet | ||
| Weight | 37 lbs | 41 lbs | 46 lbs |
Magnum Energy's ME Series inverter/chargers are modified sine wave inverters specifically designed for rugged mobile applications. The ME series is powerful and easy to use...
Frequently Asked Questions (FAQ) about Magnum ME2012 2000W 12V Inverter with 100A PFC Charger. Who is Magnum?
br/> How to describe the Magnum ME2012 2000W 12V Inverter with 100A PFC Charger?
Who is Magnum Magnum Energy is one of the leading North American manufacturers of inverters/chargers battery, inverter accessories, boxes, circuit breakers, blocs-fuses, mini-panels, conduit boxes, expansion boxes and system balancing products - intended for mobile applications including utility, RV and marine; renewable energy applications and the export market. Manufactured in Everett, Washington, and St. Paul, Minnesota, they boast more than 150 years of combined inverter design and manufacturing experience. Magnum Energy uses advanced techniques to build some of the most reliable, advanced and durable systems. inverter and chargers for off-grid solar energy solutions. How to describe the Magnum ME2012 2000W 12V Inverter W/100A PFC Charger? The ME Magnum Energy Series inverter/chargers are modified sine wave inverters specifically designed for rugged mobile applications. The ME series is powerful and easy to use...
Save 9$76 when you purchase the Magnum ME2012 2000W 12v Inverter with 100A PFC Charger for only $478 from NVN Marine! Same day dispatch before 3 p.m. Magnum ME2012 2000W 12V Inverter with 100A PFC Charger Technical Specifications
| Type: | Electric | Inverters |
|---|---|
| Supplier: | Magnum |
| Weight: | 42.0 lbs |
| Shipping Weight: | 42.0 lbs |
|---|---|
| Box sizes: | 1.00 (h) x 1.00 (w) x 1.00 (w) |
| Cubic feet: | 1.0 |
| Returnable: | Yes |
| USPS First Class: | Yes |
| P65: | Yes |
| Delivery by truck: | Yes |
- Magnum ME2012 2000W 12v inverter with 100A charger 2 blocks 20A
- Magnum ME-RC50L remote panel with 50' cable
- Magnum ME-RC50 remote panel with 50' cable
- Magnum ME-BMK Battery Monitor State of Charge with Shunt
- Magnum ME-ARC50 Advanced Remote Control with 50' Cable
- Automatic start of the Magnum ME-AGS-N generator
- Magnum Energy T400 fuse
