Maretron Fuel Flow Sensor 8-10 LPM/2.1-18.5 GPM Marine Navigation & Instruments
As fluid passes through the sensor, the internal rotors rotate. The magnets located in the rotors will pass through the sensors on the sensor circuit board. The pulses from these sensors are transmitted to the FFM100 which performs flow calculations based on the pulses received.
*Note: Two fuel flow sensors and one FFM100 fuel flow monitor are required per monitored device.
Fuel Flow Sensor 8-10 LPM/2.1-18.5 GPM
As liquid passes through the sensor, the rotors rotate. The magnets located in the rotors will pass through the sensors on the sensor circuit board. The pulses from these sensors are transmitted to the FFM100 which performs flow calculations based on the pulses received.
Specifications:
- Construction: Housing material Aluminum
- Port Size: 3/4" NPT Female
- Maximum Viscosity: 1000 cPs
- Filter Size: 60 mesh (if not already installed after fuel filter)
This product can expose you to chemicals including NICKEL (METALLIC) which is recognized by the State of California as a carcinogen. For more information,
Fuel Flow Sensor 8-10 LPM / 2.1-18.5 GPM When liquid passes through the sensor, the rotor turns. The magnet in the rotor will pass through the sensor in the sensor circuit...
PRODUCT ID: 55935
SKU: NVN-55935
CSKU: CWR-55935
REWRITE: 67046-maretron- fuel flow sensor-8-10-lpm-2-1-18-5-gpm
MPN: M8AR
UPC: 873804003559
ASIN:
WSKU:
SSKU:
KSKU:
GSKU: M8AR
MSKU:
LSKU:
NAME: Maretron Fuel Flow Sensor 8-10 LPM/2.1-18.5 GPM
NAME_EX: MARETRON FUEL FLOW SENSOR 8-10 LPM (2.1-18.5 GPM)
PTITLE: Maretron 8-10 LPM/2.1-18.5 GPM Fuel Flow Sensor
TYPE : Maritime navigation and instruments | NMEA Cables and Sensors
SELLER: Maretron
ELECTRONICS> MARINE ELECTRONICS> MARINE BOARDS & GPS Maretron J2K100-01 J2K100 NMEA 2000 / J1939 Bridge
Gtags:
GSpecs:
Maretron Fuel Flow Sensor 8-10 LPM/2.1-18.5 GPM Product Description
As fluid passes through the sensor, the internal rotors rotate. The magnets located in the rotors will pass through the sensors on the sensor circuit board. The pulses from these sensors are transmitted to the FFM100 which performs flow calculations based on the pulses received.
*Note: Two fuel flow sensors and one FFM100 fuel flow monitor are required per monitored device.
Fuel Flow Sensor 8-10 LPM/2.1-18.5 GPM
As liquid passes through the sensor, the rotors rotate. The magnets located in the rotors will pass through the sensors on the sensor circuit board. The pulses from these sensors are transmitted to the FFM100 which performs flow calculations based on the pulses received.
Specifications:
- Construction: Housing material in aluminum
- Port Size: 3/4" NPT Female
- Maximum Viscosity: 1000 cPs
- Filter Size: 60 Mesh (if not already installed after the fuel filter)
This product can expose you to chemicals including NICKEL ( METAL), known to the State of California to cause cancer. For more information, go to P65Warnings.ca.gov.
8-10 LPM Fuel Flow Sensor. / 2.1-18.5 GPM When the liquid passes through the sensor, the rotor rotates The magnet located in the rotor will pass through the sensor in the sensor circuit...
Frequently Asked Questions. Questions (FAQ) about Maretron 8-10 LPM/2.1-18.5 GPM Fuel Flow Sensor Who is Maretron?
How to describe Maretron 8-10 LPM/2 Fuel Flow Sensor, 1-18.5 GPM?
What is the exterior color of the product?
In what country is this product manufactured?
What are the dimensions and poids of Maretron Fuel Flow Sensor 8-10 LPM/2.1-18.5 GPM?
What is the connector type of the product?
What is the cable length?
What is the product communication mode?
What are the manufacturer's notes for the Maretron 8-10 LPM/2.1-18.5 GPM Fuel Flow Sensor?
Who is the Maretron? Maretron products, from GPS receivers to transducers, are designed to withstand the harshest marine conditions. Maretron carefully protects all of our electronic devices, even equipment below deck, in waterproof enclosures to ensure years of reliable performance. Superior engineering, maximum precision, consistent reliability: three reasons why Maretron products are among the best in the world. How to describe the Maretron 8-10 LPM/2.1-18.5 GPM Fuel Flow Sensor?
As fluid passes through the sensor, the internal rotors rotate. THEs magnets located in the rotors will pass through the sensors on the sensor circuit board. The pulses from these sensors are transmitted to the FFM100 which performs flow calculations based on the pulses received.
*Note: Two fuel flow sensors and one FFM100 fuel flow monitor are required per monitored device.
- In which country is this product made? AustraliaWhat are the packaging dimensions and weight of Maretron 8-10 LPM/2.1-18.5 GPM Fuel Flow Sensor? 8 (l) X 9 (h) X 9 (w) inches and the weight is: 4.49 lbs. What is the connector type of the product? Bare wireHow long is the cable? 1 m (3.3')What is the product communication method? AnalogWhat are the manufacturer's ratings for the Maretron 8-10 LPM/2.1-18.5 GPM Fuel Flow Sensor?
When the fluid passes through the sensor, the internal rotorsthey are rotating. The magnets located in the rotors will pass through the sensors on the sensor circuit board. The pulses from these sensors are transmitted to the FFM100 which performs flow calculations based on the pulses received.
*Note: Two fuel flow sensors and one FFM100 fuel flow monitor are required per monitored device.
Save $125when you purchase the Maretron 8-10 LPM/2.1-18.5 GPM Fuel Flow Sensorfor only $720 from NVN Marine! Same day dispatch before 3 p.m. Maretron Fuel Flow Sensor 8-10 LPM/2.1-18.5 GPM Technical Specifications
| Type: | Navigation & Marine Instruments | NMEA Cables and Sensors |
|---|---|
| Supplier: | Maretron |
| Weight: | 4.49 lbs |
| Product installation: | Download PDF |
| Shipping weight: | 4.49 lbs |
|---|---|
| Sizes of boxes: | 0.00 (h) x 0.00 (w) x 0.00 (w) |
| Cubic feet: | 0.0 |
| Returnable: | Yes |
| P65: | Yes |
To know detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.
