Maretron Pressure Transducer 0 to 50 PSI Marine Navigation & Instruments
Maretron fluid pressure sensor transducers work with the Maretron FMP100 which will adapt up to six pressure transducers to the NMEA 2000 network0 to 50 PSI Pressure Transducer
All Maretron pressure transducer assemblies are equipped with a 1/4" NPT male threaded fitting. Install the pressure transducer to a ¼" NPT female fitting on the system or tank to be monitored with a maximum torque of 150 in-lbs (16.95 Nm). If you are monitoring a system where pressure spikes or transients will occur, or where the pressure will exceed the maximum pressure rating of the pressure transducer, first install a pressure damper (PT-SNUB-01) on the monitored system , then install the pressure transducer to the female port of the pressure damper.
This product can expose you to chemicals including NICKEL (METALLIC), which is known to the State of California to cause cancer. For more information,
Install the pressure sensor to the 1â¢â€ž4" NPT female connector of the system or tank to be monitored, with a maximum torque of 150 in-lbs (16.95 Nm) If you monitor...
PRODUCT ID: 64725
SKU: NVN-64725
CSKU: CWR-64725
REWRITE: 75836 -maretron-. 0 to 50 psi pressure transducer
MPN: PT-0-50PSI-01
UPC: 873804002927
ASIN: B0055OIED6
WSKU: MARPT050PSI01
SSKU:
KSKU :
GSKU: PT-0-50PSI-01
MSKU:
LSKU:
NAME: Maretron Pressure Transducer 0 to 50 PSI
NAME_EX: MARETRON PRESSURE TRANSDUCER 0 TO 50 PSI
br> PTITLE: Maretron 0 to 50 PSI Pressure Transducer
TYPE: Marine Navigation & Instruments | NMEA Cables & Sensors
SELLER: Maretron
ELECTRONICS> ELMARINE ELECTRONICS> Marine Chartplotters & GPS
Sports
Maretron Pressure Transducer 0 to 50 PSI (FPM100 accessory) PT-0-50PSI
Sports
Gtags:
GSpecs:
Maretron Pressure Transducer 0 to 50 PSI Product Description Maretron Fluid Pressure Sensor Transducers work with the Maretron FMP100 which will adapt up to six pressure transducers to the NMEA 2000 network
Transducer pressure 0 to 50 PSI
All Maretron pressure transducer assemblies are equipped with a 1/4" NPT male threaded fitting. Install the pressure transducer on a ¼ NPT female fitting " on the system or tank to be monitored with a maximum torque of 150 in-lb (16.95 Nm). If you are monitoring a system where pressure spikes or transients will occur, or where the pressure will exceed the maximum pressure rating of the pressure transducer, first install a pressure damper (PT-SNUB-01) on the monitored system , then install the pressure transducer to the female port of the pressure damper.
This product can expose you to dangerousChemicals, including NICKEL (METALLIC), known to cause cancer in the State of California. For more information,
Install the pressure sensor onto the 1â¢â€ž4" NPT female connector of the system or tank to be monitored, with a maximum torque of 150 in-lbs (16.95 Nm) If you are monitoring...
Frequently Asked Questions (FAQ) about the Maretron 0 to 50 PSI Pressure Transducer Who is the Maretron?
How to describe the Maretron 0 to 50 PSI Pressure Transducer. 50 PSI?
What is the exterior color of the product?
In which country is this product manufactured?
What is the Maretron Pressure Transducer 0 to 50 PSI package dimensions and weight?
/> What is the connector type of the product?
What is the cable length?
What is the communication method of the product?
br/> What are the manufacturer's notes regarding the Ma pressure transducerretron 0 to 50 PSI?
Who is the Maretron? Maretron products, from GPS receivers to transducers, are designed to withstand the harshest conditions. momsanitary conditions. Maretron carefully protects all of our electronic devices, even equipment below deck, in waterproof enclosures to ensure years of reliable performance. Superior engineering, maximum precision, consistent reliability: three reasons why Maretron products are among the best in the world. How to describe the Maretron 0 to 50 PSI pressure transducer? The Maretron fluid pressure sensor transducers work with the Maretron FMP100 which will adapt up to six pressure transducers to the NMEA 2000 network. What is the exterior color of the product? Silver
- In which country is this product made? ChinaWhat are the dimensions and weight of Maretron 0-50P pressure transducerIF ? 5 (l) X 1 (h) X 5 (w) inches and the weight is: 0.26 lbs. What is the connector type of the product? Bare wireHow long is the cable? 1 m (3.3')What is the product communication method? AnalogWhat are the manufacturer's ratings for the Maretron 0 to 50 PSI Pressure Transducer? Maretronfluid pressure sensor transducers work with the MaretronFMP100 which will adapt up to six pressure transducers to the NMEA 2000 network
Save $28when you purchase the Maretron 0 to 50 PSI Pressure Transducerfor only $174at NVN Marine! Same day dispatch before 3 p.m. Maretron Pressure Transducer 0 to 50 PSI Technical Specifications
| Type: | Marine Navigation & Instruments | NMEA Cables and Sensors |
|---|---|
| Supplier: | Maretron |
| Weight: | 1.0 lbs |
| Product Installation: | Download PDF |
| Shipping Ping Weight: | 1.0 lbs |
|---|---|
| Box sizes: | 1.00 (h) x 5.00 (w) x 6.00 (w) |
| Cubic feet: | 30.0 |
| Recordable: | Yes |
| P65: | Yes |
For detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.
