Maretron TMP100 Temperature Module Marine Navigation & Instruments
The Maretron TMP100 measures the temperature of up to 6 temperature probes and reports the information over a NMEA 2000 network. The TMP100 supports up to 4 thermistor probes and 2 high temperature thermocouple probes. Optional thermistor probes (-20°C to 80°C or -4°F to 176°F) cover a wide range of applications including cabin air temperature, cabin air temperature engine room temperature, refrigerator/freezer temperature, under-bolt temperature (inverters, loads, pumps, motors, etc.), tank temperatures (live well baits, hot water, etc.), and tank temperatures (live well baits, hot water, etc.) air ducts. Optional thermocouple probes (0°C to 900°C or 32° to 1652°F) are used to measure Exhaust Gas Temperature (EGT) as part of a complete fuel management system. /p>
Better yet, the TMP100 is NMEA 2000 certified, so you can view all temperature information at any time.anywhere on the vessel using a compatible NMEA 2000 display. The TMP100 is a key part of Maretron's N2KView vessel monitoring and control system.
MAttributes of the aretron TMP10001
The Maretron TMP100 measures the temperature of up to 6 temperature probes and reports the information over a NMEA 2000 network. The TMP100 supports up to 4 thermistor probes and 2 high temperature thermocouple probes. Optional thermistor probes (-20°C to 80°C or -4°F to 176°F) cover a wide range of applications including cabin air temperature, cabin air temperature of the engine room, the temperature of the refrigerator/freezer, the temperature under the bolts. (inverters, loads, pumps, motors, etc.), tank temperatures (live well baits, hot water, etc.), and air duct temperatures. Optimal thermocouple probes (0°C to 900°C or 32°F to 1652°F) are usedes to measure Exhaust Gas Temperature (EGT) as part of a complete fuel management system.
Maretrons TMP100 can measure the temperature of up to 6 temperature probes and report the information via the NMEA 2000 network. The TMP100 supports up to 4 thermistor probes...
- Six external temperature probes are measured and broadcast over the NMEA 2000 network
- Four channels for thermistor probes and two channels for high temperature thermocouple probes
- Wide variety of applications supported with optional temperature probes
- Ambient air temperature probe (-20°C to 80°C or -4°F to 176°F)
- Ring terminal probe (-20°C at 80°C or -4°F to 176°F)
- Immersion probe for tanks or plenums (-20°C to 80°C or -4°F to 176°F)
- Exhaust gas temperature sensor (0°C to 900°C or 32° to1652°F)
- Cabin temperature
- Engine room temperature
- Under bolt temperature (inverters, chargers, pumps, etc.)
- Fridge/freezer temperature
- Tank temperatures (Bait of living wells, hot water, etc.)
- Air duct temperature
- Exhaust gas temperature
- Number of thermistor channels: 4
- Number of thermocouple channels: 2
- Measuring Range – Thermistor: -20°C to 80°C (-4°F to 176°F) (With supplied thermistor probe)
- Measurement Accuracy – Thermistor: ± 2°C (± 3.6°F) (With thermistor probe supplied)
- Measurement Range – Thermocouple: 0°C to 900°C (32°F to 1652°F) (with thermocouple probe supplied)
- Measurement accuracy – Thermocouple: ± 2°C (± 3.6°F) (With thermocouple probe supplied)
- Operating voltage: 9 to 32 Volts (voltageDC)
- Power consumption: 100 mA (NMEA 2000 interface)
- Load Equivalence Number (LEN): 2 (NMEA 2000 spec. [1LEN = 50 mA])
- Battery reverse protection: yes (indefinitely)
- Charge discharge protection: yes (Energy rating according to SAE J1113)
PRODUCT ID: 35196
SKU: NVN-35196
CSKU: CWR-35196
REWRITE: 46307-maretron-tmp100-temperature- module
MPN: TMP100-01
UPC: 873804000220
ASIN: B00MG6X6O8
WSKU: MARTMP10001
SSKU: MRTN-TMP100-01
KSKU: MRTTMP10001
GSKU: TMP100-01
MSKU:
LSKU:
NAME: Module Maretron TMP100 Temperature Module
NAME_EX: MARETRON TMP100 TEMPERATURE MODULE
PTITLE: Maretron TMP100 Temperature Module
TYPE: Navigation and Marine Instruments | NMEA Cables and Sensors
SELLER: Maretron
ELECTRONICS> MARINE ELECTRONICS> Marine Chartplotters and GPS
Sports
ModuleMaretron TMP100-01 Temperature Module
Maretron TMP100 Temperature Module
Sports
Gtags:
GSpecs:
Maretron TMP100 Temperature Module Product Description
The Maretron TMP100 measures the temperature of up to 6 temperature probes and reports the information over a NMEA 2000 network. The TMP100 supports up to 4 thermistor probes and 2 high temperature thermocouple probes. Optional thermistor probes (-20°C to 80°C or -4°F to 176°F) cover a wide range of applications including cabin air temperature, cabin air temperature engine room temperature, refrigerator/freezer temperature, under-bolt temperature (inverters, loads, pumps, motors, etc.), tank temperatures (live well baits, hot water, etc.), and tank temperatures (live well baits, hot water, etc.) air ducts. Optional thermocouple probes (0°C to 900°C or 32° to 1652°F) are used to measure Exhaust Gas Temperature (EGT) as part of a complete fuel management system. /p>
Better yet, the TMP100 is NMEA 2000 certified, so you canSo you can view all temperature information anywhere on the vessel using a compatible NMEA 2000 display. The TMP100 is a key component of Maretron's N2KView ve vessel monitoring and control system.
Attributes of the Maretron TMP10001
The Maretron TMP100 measures temperature on up to 6 temperature probes and transmits the information over a NMEA 2000 network. The TMP100 supports up to 4 thermistor probes and 2 high thermocouple probes temperature. Optional thermistor probes (-20°C to 80°C or -4°F to 176°F) cover a wide range of applications including cabin air temperature, cabin air temperature of the engine room, the temperature of the refrigerator/freezer, the temperature under the bolts. (inverters, loads, pumps, motors, etc.), tank temperatures (live well baits, hot water, etc.), and air duct temperatures. The probesOptimal thermocouple sensors (0°C to 900°C or 32°F to 1652°F) are used to measure Exhaust Gas Temperature (EGT) as part of a complete fuel management system.
Maretrons TMP100 can measure the temperature of up to 6 temperature probes and report the information via the NMEA 2000 network. The TMP100 supports up to 4 thermistor probes...
- Six external temperature probes are measured and broadcast over the NMEA 2000 network
- Four channels for thermistor probes and two channels for high temperature thermocouple probes
- >Wide variety of applications supported with optional temperature probes
- Ambient air temperature probe (-20°C to 80°C or -4°F to 176°F)
- Terminal probe annular (-20°C to 80°C or -4°F to 176°F)
- Immersion probe for tanks or plenums (-20°C to 80°C ou -4°F to 176°F)
- Exhaust gas temperature sensor (0°C to 900°C or 32° to 1652°F)
- Cabin temperature
- Engine room temperature
- Temperature under bolts (inverters, chargers, pumps, etc.)
- Refrigerator/freezer temperature
- Tank temperatures (Live bait, hot water, etc.) .)
- Air dProduct temperature
- Exhaust gas temperature
- Number of thermistor channels: 4
- Number of thermocouple channels: 2
- Measuring range – Thermistor: -20°C to 80°C (-4° F to 176°F) (With thermistor probe supplied)
- Measurement accuracy – Thermistor: ± 2°C (± 3.6 °F) (With thermistor probe supplied)
- Measuring range – Thermocouple: 0°C to 900°C (32°F to 1652°F) (with thermocouple probe supplied)
- Measuring accuracy – Thermocouple:±2°C (±3.6°F) (with supplied thermocouple probe)
- Operating voltage: 9 to 32 volts (DC voltage)
- Power consumption: 100 mA ( NMEA 2000 interface)
- Load Equivalence Number (LEN): 2 (NMEA 2000 specifications. [1LEN = 50 mA])
- Battery reverse protection: Yes (indefinitely )
- Charge discharge protection: Yes (energy rating according to SAE J1113)
Maretron TMP100 Temperature Module Related ProductsMaretron Micro Tee
Maretron Micro Double Ended Cord - 0.5M
Maretron Micro Double Ended Cord - 1 Meter
Maretron Micro Double Ended Cord - 3M
Maretron Micro Double Ended Cord - 6 Meter
Maretron Double Ended Micro Cord - 2 meters
Maretron Double Ended Micro Cord - 4 meters
Maretron Double Ended Micro Cord 5 meters
Maretron Temperature Sensor for DCM100
Maretron Probe ambient air temperatureiant
Frequently asked questions (FAQ) about the Maretron TMP100 temperature module Who is Maretron?
How to describe the Maretron TMP100 temperature module?
What is the exterior color of the product?
In which country is this product manufactured?
What are the dimensions and weight of the Maretron TMP100 temperature module?
What is the connector type of the product?
What is the product communication method?
What are the manufacturer's notes on the Maretron TMP100 temperature module?
Who is Maretron? MaretrOn products, from GPS receivers to transducers, are designed to withstand the harshest marine conditions. Maretron carefully protects all of our electronic devices, even equipment below deck, in waterproof enclosures to ensure years of reliable performance. Superior engineering, maximum precision, consistent reliability: three reasons whyMaretron products are among the best in the world. How to describe the Maretron TMP100 temperature module?
The Maretron TMP100 measures the temperature of up to 6 temperature probes and reports the information over a NMEA 2000 network. The TMP100 supports up to 4 thermistor probes and 2 probes with high temperature thermocouple. Optional thermistor probes (-20°C to 80°C or -4°F to 176°F) cover a wide range of applications including cabin air temperature, cabin air temperature engine room temperature, refrigerator/freezer temperature, underbolt temperature (inverters, loads, pumps, motors, etc.), tank temperatures (live bait, hot water, etc.) and duct temperatures 'air. Optional thermocouple probes (0°C to 900°C or 32° to 1652°F) are used to measure Exhaust Gas Temperature (EGT) as part of a complete vehicle management systemburant.
Better yet, the TMP100 is NMEA 2000 certified, so you can view all temperature information anywhere on the vessel using a compatible NMEA 2000 display. The TMP100 is a key part of Maretron's N2KView vessel monitoring and control system.
What is the exterior color of the product? Black- In which country is this product made? United StatesWhat are the dimensions and weight of the Maretron TMP100 temperature module? 7 (l) X 2 (h) X 9.5 (w) inches and the weight is: 1.26 lbs. What is the connector type of the product? NMEA2000 MicroWhat is the product communication method? NMEA 2000What are the manufacturer's ratings for the Maretron TMP100 temperature module?
The Maretron TMP100 measures the temperature of up to 6 temperature probes and reports the information over a NMEA 2000 network. The TMP100 supports up to 4 thermistor probes and 2 temperature probes. thermohigh temperature couple. Optional thermistor probes (-20°C to 80°C or -4°F to 176°F) cover a wide range of applications including cabin air temperature, cabin air temperature engine room temperature, refrigerator/freezer temperature, under-bolt temperature (inverters, loads, pumps, motors, etc.), tank temperatures (live well baits, hot water, etc.), and tank temperatures (live well baits, hot water, etc.) air ducts. Optional thermocouple probes (0°C to 900°C or 32° to 1652°F) are used to measure Exhaust Gas Temperature (EGT) as part of a complete fuel management system. /p>
Better yet, the TMP100 is NMEA 2000 certified, so you can view all temperature information anywhere on the vessel using a compatible NMEA 2000 display. The TMP100 is a key component of Maretron's N2KView vessel monitoring and control system.
Save $53when you buy the Maretron TMP100 Temperature Modulefor only $251about NVN Marine! Same day dispatch before 3 p.m. Maretron TMP100 Temperature Module Technical Specifications
| Type: | Marine Navigation & Instruments | NMEA Cables and Sensors |
|---|---|
| Supplier: | Maretron |
| Weight: | 1.25 lbs |
| User Guide: | Download PDF |
| Product Manual: | Download PDF |
| Product brochure: | Download PDF |
| Product installation: | Download PDF |
| Shipping weight: | 1.25 lbs |
|---|---|
| Box sizes: | 5.00 (h) x 7.00 (w) x 10.00 (w) |
| Cubic feet: | 350.0 |
| Recordable: | Yes |
| P65: | Yes |
- Maretron TLM150 Tank Level Monitor
- Maretron TLM100 Tank Level Monitor - 40" Maximum Depth - No Gas
- Maretron TLA100 NMEA 2000 Tank Level Adapter
- Maretron temperature sensor for DCM100
- Maretron TCS-01 - Telemetry Cloud Service
- Maretron 0-3 PSI Submersible Pressure Transducer
- Maretron Submersible Pressure Transducer - 0-1.5 PSI
