Mastervolt Mac Plus 24/24-30 + CZone Electrical
Mac Plus 24/24-30 + CZone
Boost the service battery
Too often, the batteries service are not working they are not getting the charge they need. This is a problem made worse by smart alternators and start/stop systems, which result in slow and insufficient charging. The Mac Plus DC-DC charger solves this problem by providing fast, safe and constant charging to the service battery. And, by knowing when the motor is running and providing load, users can be confident that the Mac Plus will never drain a starter battery.
Proven Mastervolt quality
Users have peace of mind knowing they have the best on board. Thanks to the proven Mastervolt 3-step+ charging algorithm, the Mac Plus provides fast and easy charging, even for completely discharged batteries.
A robust design withstands even the harshest conditions.more difficult, with charging optimized according to battery temperature. and a high-quality aluminum housing to provide superior protection against dust and water ingress. The energy-efficient design also allows the Mac Plus to run quietly and fan-free.
Total power flexibility
With a wide operating range DC input, the Mac Plus supports all DC sources and can charge two batteries from a single alternator or charger. It supports a full range of battery chemistries and types, including lithium. It also works perfectly with modern alternators such as Euro 5 and 6, ensuring proper charging by providing consistent power, even when the alternator is idle.
A parallel configuration of up to ten units will provide more than 100 amps. Advanced high frequency technology withModern microprocessors ensure minimal power loss when switching from 12V to 24V and vice versa.
Analog voltage sensing ports are also available to compensate for voltage drops and maintain proper charging .
Superior monitoring and control
Compatibility with CZone, NMEA 2000 and MasterBus provides truly superior monitoring and control and ensures that Mac Plus s Easily integrated into complete systems. Get the best possible performance through various high-quality controllers and MOSFETs. And easily configure the Mac Plus via MasterAdjust, the CZone configuration tool, or even via the built-in DIP switches.
Features:
- Fast and safe charging, even on short journeys
- Fanless design for quiet operation
- Suitable for Flooded, Gel, AGM and Li-Ion (including LiFePO4) batteries
- Recharges even completely exhausted batteries
- Engine running detection protects the starter battery
- Adjustable current limits to meet Euro 5/6 requirements
- Voltage stabilization protects sensitive equipment, lights and loads
- Parallel operation to achieve load capacities well in excess of 100 A
- MasterBus, CZone and NMEA 2000 are compatible for intelligent system monitoring and automation
- Temperature compensation and voltage sensing for optimal chargingg result
- E-Mark/R10 certification for mobile applications
- Power mode provides stable power for sensitive loads
- Robust connections for easy installation and quick configuration via DIP switches
Specifications:
- Battery temperature sensor: yes, included
- Battery voltageBattery Detection: Yes
General Specifications:
- Status Indicator: Yes, 3 Color LED
- Communication protocol: MasterBus, CZone and NMEA 2000
- Output voltage: 20-30 V
- Rated output voltage: 24 V
- Power stabilization output voltage: 2% at extremes of temperature, load and input
- Output voltage ripple (peak-peak): Max. 1%
- Max. Output Power: 850W
- Rated Output Power: 810W
- Max. Output current: 30 A
- Output load current (3-step mode): 30 A
- Rated input voltage: 24 V
- Range of Input Voltage: 19- 30VMax. Input current: 30 A
- Galvanic isolation: No
- Voltage limited: Yes
- Efficiency:> 95% (at nominal input voltage, full charge) ; Peak 97
- Parallel configuration: Yes
- Alarm contact: Yes, via MasterBus
- Power supplyn MasterBus: No
- Motor run signal input: Yes (active high/active low)
- DIP switches: yes, for basic configuration
- Dimensions, H x W x D: 255 x 165 x 66 mm (10.0 x 6.5 x 2.6 in)
- Weight: 2 kg (4.4 lb)
- Conformity: CE, E-Mark, SAE J1171 and ISO 8846 Protection against ignition
Technical specifications:
- No load consumption: <2 mA
- Charging characteristic: 3 traps+
- Battery types: Flooded, Gel, AGM, spiral, Lithium Ion, traction, defined by user
- 3-stage charging option: Yes (DIP switch settings)
- DC consumption: <5 mA
- Connections: 3 M8 terminals for diameters of cable from 10 to 50 mm², (positive input, positive output, common negative connection) 8-pole screw connection for cable diameters from 0.75 to 1.5 mm² (remote on/off, temperature sensor, voltage measurement
- Range oftemperature (room temp): -25 degrees C to 60 degrees C; derating> 40
- Cooling: natural cooling
- Protections: overload, overheating, DC short circuit, reverse polarity (fuse)
- MasterBus compatible: yes
PRODUCT ID: 102662
SKU: NVN-102662
CSKU: CWR-102662
REWRITE: 113773-mastervolt-mac-plus-24- 24-30-czone
MPN: 81205405
UPC:
ASIN:
WSKU: MAS81205405
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: MASTERVOLT MAC PLUS 24/24- 30 + CZONE
NAME_EX:
PTITLE: Mastervolt Mac Plus 24/24-30 + CZone
TYPE: Electric | Battery Chargers
SELLER: Mastervolt
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
Gtags:
GSpecs:
Mastervolt Mac Plus 24/24-30 + CZone Product description
Mac Plus 24/24-30 + CZone
Boost the service battery
Too often, service batteries do not receive the charge they need. This is a problem made worse by smart alternators and start/stop systems, which result in slow and insufficient charging. The Mac Plus DC-DC charger solves this problem by providing fast, safe and constant charging to the service battery. And, by knowing when the motor is running and providing load, users can be confident that the Mac Plus will never drain a starter battery.
Proven Mastervolt quality
Users have peace of mind knowing they have the best on board. Thanks to the proven Mastervolt 3-step+ charging algorithm, the Mac Plus provides fast and easy charging, even for completely discharged batteries.
Right designobuste resists even the harshest conditions, with charging optimized according to battery temperature. and a high-quality aluminum housing to provide superior protection against dust and water ingress. The energy-efficient design also allows the Mac Plus to run quietly and fan-free.
Total power flexibility
With a wide operating range DC input, the Mac Plus supports all DC sources and can charge two batteries from a single alternator or charger. It supports a full range of battery chemistries and types, including lithium. It also works perfectly with modern alternators such as Euro 5 and 6, ensuring proper charging by providing consistent power, even when the alternator is idle.
A parallel configuration of up to ten units will provide more than 100 amps. TechAdvanced high frequency technology with modern microprocessors ensures minimal power loss when switching from 12V to 24V and vice versa.
Analog voltage sensing ports are also available to compensate for voltage drops and maintain proper charging.
Superior monitoring and control
Compatibility with CZone, NMEA 2000 and MasterBus provide truly superior monitoring and control and ensure that Mac Plus integrates easily into complete systems. Get the best possible performance through various high-quality controllers and MOSFETs. And easily configure the Mac Plus via MasterAdjust, the CZone configuration tool, or even via the built-in DIP switches.
Features:
- Fast and safe charging, even on short journeys
- Fanless design for quiet operation
- Suitable for batteries iundated, Gel, AGM and Li-Ion (including LiFePO4)
- Recharges even completely exhausted batteries
- Engine running detection protects the starter battery
- Adjustable current limits to meet Euro 5/6 requirements
- Voltage stabilization protects sensitive equipment, lights and loads
- Parallel operation to achieve much higher load capacities at 100 A
- MasterBus, CZone and NMEA 2000 are compatible for intelligent system monitoring and automation
- TemperatureTemperature compensation and voltage detection for optimal charging result li>
- E-Mark/R10 certification for mobile applications
- Power mode provides stable power for sensitive loads
- Heavy -Service connections for installation easy and quick configuration via DIP switches
Specifications:
- Battery temperature sensor: Yes, included
- Battery voltage detection: Yes
General specifications:
- Status indicator: Yes, 3 LED colors
- Communication protocol: MasterBus, CZone and NMEA 2000
- Output voltage: 20-30 V
- Rated output voltage: 24 V
- Output voltage stabilization: 2% at extreme temperatures, loads and inputs
- Recharge voltage ripple: output (peak-peak): Max. 1%
- Max. Output Power: 850W
- Rated Output Power: 810W
- Max. Output current: 30 A
- Output load current (3-step mode): 30 A
- Rated input voltage: 24 V
- Rank of input voltage: 19-30V
- Max. Input current: 30 A
- Galvanic isolation: No
- Voltage limited: Yes
- Efficiency:> 95% (at nominal input voltage, full charge) ; Peak 97
- Configurationparallel ion: Yes
- Alarm contact: Yes, via MasterBus
- MasterBus power supply: No
- Motor running signal input: Yes (active high /active low)
- DIP switches: yes, for basic configuration
- Dimensions, H x W x D: 255 x 165 x 66 mm (10.0 x 6.5 x 2.6 inches)
- Weight: 2 kg (4.4 lbs)
- Compliance: CE, E-Mark, SAE J1171 and ISO 8846 Ignition protection
Technical specifications:
- No-load consumption: <2 mA
- Charging characteristic: 3 traps+
- Battery Types: Flooded, Gel, AGM, Spiral, Lithium Ion, Traction, User Defined
- 3-stage charging option: Yes (DIP switch settings)
- DC consumption: <5 mA
- Connections: 3 M8 terminals for cable diameters from 10 to 50 mm², (positive input, positive output, negative joint connection) 8-pole screw connection for cable diameters from 0.75 to 1.5 mm² (remote on/off, temperature sensor, voltage measurement
- Temperature range (ambient temperature): -25 degrees C to 60 degrees C; derating> 40
- Cooling : Natural cooling
- Protections: Overload, overheating, DC short circuit, reverse polarity (fuse)
- MasterBus compatible: Yes
Save $291 when you purchase the Mastervolt Mac Plus 24/24-30 + CZone for only $427 b> at NVN Marine! Same day dispatch before 3 p.m. Mastervolt Mac Plus 24/24-30 + CZone Videos Mastervolt Mac Plus 24/24-30 + CZone Technical specifications
| Type: | Electric | Battery chargers |
|---|---|
| Supplier: | Mastervolt |
| Charger Input - Voltage: | 24v |
| Charger Output - Amps: | 30a |
| Charger Output Voltage: | 20-30 v |
| Product Manual: | Download PDF |
